Save your Stretch Bracelets! Use this knotting technique to finish your stretch bracelets.
Vložit
- čas přidán 20. 09. 2022
- ***Save 15% off your first order at Eureka Crystal Beads by using the code: SAVE15
Shop the store here:
eurekacrystalbeads.com?/aff=30
Get the supplies:
Opelon
www.eurekacrystalbeads.com/op...
This is impossible to follow.
😂😂😂
String beads, use needle, follow through beads, string once, loop around again, go through bead, knit once, tie once, tie once, knot again, make a left, go over the river and through the woods, tie another knot, connect 4, the get a yatzee, throw some glue on it, and hide the knot.
YOU GOT THIS!! I have faith in you. 😊
@@MizzScentsationalNo with all the cuts in the video, it’s literally impossible to follow. Sure that it’s simple if it were actually shown properly.
literally mine broke when I tried this
I do this all the time haha. If I have some bead bracelets that do not fit my wrist, I save them using this method.
Howw?
Glue is a nice touch 👏
I like the colour
Please provide a slower video and more explanation for all ages!
I do exactly the same thing !! Only difference is that I stretch my elastic before I bead it for a bracelet I stretch and pull at it before I feel that it helps that way it's not "surprised" when people are trying it on!! If that makes sense 😉
Brilliant! Thank you so much
Thank you so much this was pretty simple idk what the people in the comments are talking about. Thank you for simplifying this, I watched a whole 12 video and she was talkinG TOO MUCH AND if yall need a better explanation look for one of those videos 😂
That is great advice on tying the elastic. I will definitely be doing that
This is what I needed to learn for rite now...
Thank you so much
Thanks this is by far the easiest video I've been able to understand/follow 👍I can do this easily!! Thanks a bunch
7yrs later im still wearing mine so no it has never broken
Got that back in da day good string😂
Thanks ❤for easy tutorials was struggling soo much to make a knot for the bracelet before i saw video
Thankyou
Okay thanks
I will try this
Helpful ❤❤
You are a life saver❤❤❤❤
I use that string and it’s the best
Saved my life ❤
you have to have a giant hole in your beads to go through with that many times.
I thought the same thing. I am working with tiny beads. Ugh.
It worked with small beads for me just now but not the tiny ones. You can buy different gauge (thickness/weight) stretch cord. You can use thinner for tiny beads.
Thanks alot
I've been struggling (I'm actually a kid and I got a bead set)
Thank you so much
Take a coper thin wire from electric wire and rollover tha elastic and insert that wire in crystal bts
Thanks!
Thank you
Thank you❤
Awesome
Super easy to follow. Straight to the point. Thanks!!!
TYSM!❤❤
Glad I found your channel. New Subber! This has happened to me with bracelets and necklaces. So frustrating. I will study your videos! THANK YOU! :)
thankyou so much
nice technique
I wanted to make these but after watching g this video - I don’t think so.
Do you find the fiber
string stretches out over time and it shreds?
No that's why I love the Opelon but like with everything, given enough time, yes it could stretch out. By doubling it up it helps distribute the stress of that wear and tear.
Do you have a tutorial for tying knots on smaller beads?@@katsilviadesigns
I am slightly confused. You should going two beads passed the start of the Opelon but when you go to tie both sides together they are right next to each other and not a couple beads apart. Am I just seeing it wrong? Thank you for your help
I think they went all the way around and back to the start but oof they didn’t explain it well
I was wondering that too
Ty dear
You can just… fold the string in half and put that into the big eye needle. Then just string beads like normal and tie off and you have four strings instead of two.
The problem I encounter is whenever I have used Opalon with glue, it always breaks within 3-4 months as the glue has eaten away at the string.
Are these large hole beads? What method to you recommend if holes aren’t that large? Ream one bead to cover the knot?
I❤ this video 🎉
Wow the holes in your beads must be huge. I tried putting a broken pearl bracelet on elastic and the holes are tiny
We need more Kat.
This is a good idea but I tie it differently just cuz I cut the extra elastic so you can't tell and the beads just go over the knot so it doesn't look like it has a knot
Could you do a tutorial how to tie string to needle?
I used a hang mans knot bc it gets tighter the more its pulled plus it has a low profile
Yes
Thank u😢
Did she go through all the beads with the needle or a few?
I tie stretch bracelet really tight. Is that a mistake? I do not tie it while it stays loose.
Any advice on how to put a knot into 1mm hole?
Omggg thanks
Mam, what should be elastic cord size for 10mm bead bracelet? .
Will this work with small beads? As it looks like a big knot to pull beads through. Thanks for sharing 🎉
No. You nee a bigger bead hole.
Sometimes I have a hard time especially with 8mm or smaller
I'll make it by myself it is not break
How do you keep your ends from fraying?
Thank you so much this is very helpful
How do you know how long to make it?
When you cut it both ends are not together but when you make the first knot they are. Please explain better
This thread breaks very easily if it contacts with water frequently..I'd received my bracelet in the same thread..it broke down in very few days.
How to insert wire into needle
😎 🆒️
Which glue are u using ?
do these need to be glued ?i tried this method because its easy hopinh its secure
What size cord for 3.5 to 4mm beads?
Where I can get needle this?
could you link the video for this turorial??
❤❤
the fact that u shld hv a streching fiber thread
What size needle do you use?
What the thread is called?
I had not 1 but 2 of them break
what's this kid of adhesive?
its bullet proof at this point
My string always breaks on me
Ye kahape milta hai
Inhave 4mm beads it’s impossible to hide a knot 🪢 w small beads and I double string it so how can I with out a large bead to hide b
What glue do you use?
GS Hypo cement works the best for me.
Tyt
SURGEONS KNOt
How about a clay bead???
How many mm thé string has to be thanks
All depends on your beads. If you have larger holes you can use a thicker Opelon.
Nice sharing my friend
New friend here
Please stay connect
I have this really thick string a I can’t seem to tie it because it keeps falling apart
Are you using Opelon Cord? That's my favorite because the knotting is easier and less bulky. www.eurekacrystalbeads.com/opelon-stretch-jewelry-cord-white-0-7mm-5-meters/?aff=30
@@katsilviadesigns Mine is 1mm and I don’t think it’s that
@@charetti.spaghetti Have you tried any type of glue with the knot? If you have a picture, feel free to DM me on Instagram @katsilviadesigns so I can take a closer look.
@@katsilviadesigns I haven’t but I also have new string and transferred it to my thinner strand of string and it fits perfectly. Thank you so much though!
There are other methods u can try for a 1mm string
It's impossible to see what's going on. Unfortunate.
Surgeon knot?
uhhh imma find another instructional video
How is Opelon the best when it freys every time I handle it? I have the same kind, size and everything. But imma try the not in this short and see what happens. I couldn't catch the first step either but I figured it wasn't necessary cause you said if my beads allowed. Thank you for the tip.
huh.
get closer and don’t cut out so much of the movements it gets confusing cause we didn’t see half the step
It does NOT need to be this difficult just knot it it 4 times TIGHT and there
no
Opelon is NOT the best.
What do you suggest?
That glue stinks so bad OMG like gasoline. I had high hopes.
TOO MUCH!!😂 IF YALL WANT TO KNOW HOW TO HAVE A STRONG STRETCH BRACELET, AFTER YOU BEADED YOUR BRACELET TIE ONE SMALL INVISIBLE KNOT 2 BRING THE BEADS TOGETHER, TAKE THE 2 LONG ENDS AND CRISS CROSS BACK THE OPPOSITE WAY THROUGH ALL THE BEAD HOLES UNTIL THEY MEET TOGETHER FACE 2 FACE , ONCE YOU PULLED YOUR 2 LONG STRINGS TO MEET AT THE TOP THERE WILL BE A BEAD IN THE MIDDLE, ON EACH SIDE OF THAT BEAD TIE 2 SMALL SINGLE KNOTS ON SECOND STRING TIGHTLY, IN BETWEEN THE BEAD, THEN DO THE OPPOSITE SIDE SAME AS, CUT CLOSELY SO THE KNOTS WONT SHOW AS ALL THE BEADS COME TOGETHER THE KNOTS WILL AUTOMATICALLY HIDE INSIDE THE BEAD, DOUBLE BAND EXTRA SUPPORT, HELLO!! EVERYONE THANK ME LATER❤👌💯
You definitely skipped a step to follow this
no good 😢
That is not a pretty bracelet. Looks like something Marge Simpson would wear.
Is that a "threading needle" - a needle threader? 🪡
Thank you so much