Hope you guys enjoy ! Social media @rinowrapz If you’re interested in purchasing a roll of wrap and trying for yourself, head over to @rinowrap to purchase a roll!
For everyone watching just remember to use post heat after installing it help the vinyl stick better and faster. Heat will tighten it so it enforced the longevity of the wrap
It looks easy but I am telling you guys , for a beginner with no experience in wrapping , this is very hard to do it alone. You better ask some one to assist you. 😀
I just did my roof and I looks like trenches with all the lines i left ( I’m gonna re do it all again but damn it’s an experience)😭 trunk came out great tho
Bro keep the videos coming. This was great! Like someone else mentioned, it’s great to see someone relatively new to the wrap game do this, it’s more relatable.
Bruh of almost all the videos I have seen CZcams about how to wrap this one is by far the simplest and well explained way on how to do this! Great job dawg we sure do appreciate the video!
I've got a fiberglass hood on its way, thanks for the video. I was torn between getting it painted (my paint isn't in great shape), or wrapping it in a carbon fiber, or subtle color. Good job, thanks for taking the time to record this.
Thank you so much, super informative, and great to see a novice, more or less, versus a professional shop doing it. Same gives me more confidence that you can do a great job even without a lot of experience doing it. Pretty sure I’m gonna do it myself now, instead of paying somebody!
Great job man. Happy I found your page. Just about to do my first wrap on one of my Rx7s to get it ready for 7s Day on my channel. Very inspiring video. 👏🏿 keep up the great work.
It helps a lot to have someone else helping you as well because by yourself, you can only pull in one direction, kind of, which causes the other side to make lines.
I was getting ready to comment that you should probably have a heat gun on deck and it cut to the part where you were using it lol. I have a black 2011 Cadillac CTS. I did a custom black mesh grill and deleted my chrome with 3M carbon fiber vinyl. 1080 or whichever one it was. It was the textured one, like real carbon fiber feel. That stuff is a real pain in the ass! No pulling up once it's down. Stretching will ruin the carbon fiber pattern. Squeegee a quarter inch at a time as you go type shit. It's an extremely sticky vinyl as well. Thought I would give you a heads up on that since you were cool enough to share your awesome video! Thanks bro, appreciate the look.
the first i tried wrapping my car was in october 2022 and it took me 4 hours to do the hood of my car, until i gave up and went to a shop. going to wrap my car myself and commit this time, so im glad i found this video.
Hey bro!! Awesome video man, very informational and smooth guide. I’m about to do the hood on my wife’s Mazda 3 with Vivid vinyl wrap that I’ve been using for the last year or so. Love the videos man, keep it up!
Thanks 🙏🏽 bro appreciate it good 👍🏽 video I’m going to do my hood as well I was a bit nervous 😬 but after watching this video it really helped me out 🔥🙌🏽❤️
Not a good idea, water can be trapped in the air release pattern, you will void material warranty on most materials with a wet application of air release vinyl
noice job good tutorial, i just cant tell if you are actually stretching the vinyl to the edges, usual you lift pressure before you get to your edges or the wrap is going to curl. other than that amazing job very good tutorial. keep it up my man.
Thank You!! Very nice job!! This totally inspires me!! I love doing auto body repair-yes bondo-the whole nine yards. But, I found a major problem when I painted. No matter how hard or what I tried it was never how I hoped it would be. Ya, sure they color match to the # on the inside of your car door BUT they don’t have that color paint after it’s been weathered for 5+ years. Totally didn’t match. The clear coat was not even close to gloss (as stated). So I believe this is an amazing alternative to hassling with paint and still getting that beautiful glossy look that all cars should have. Thank you!! Keep on rolling out the awesome tutorials!! 😁
I've seen prestigious auto paint shops get into crazy deep detail. i dont want to learn the ancient Chinese secrets to every color in the crayola box. I'm wrapping my shyt as well.
You can get a gun and base coat, clear coat, hardener, acetone/reducer, paint mask, and if you don't have one, a air compressor 3hp 25gal for under $250 and paint your entire car. I've seen professional jobs done with $10 air guns with decent paint and pro passable with $50 air gun using rustoleum paint. I've even seen an amazing job with rustoleum spray cans, used lime green about 8 cans for $70 and 2x clear coat cans that has hardener using around 6 cans. The 2X Clear spray used to be $10 ea but they went up to $15 ea which brings that up to $90 So it'll cost you around $190 to spray can your car if you include a duel filtered paint mask, sand papers 80, 160, 300, 400, 600 grit and 1/4" & 2" 3M masking tape. Use the 1/4" 3M autimotive masking tape for edges and bends and the 2" for connecting to news paper on windows/grill/plastic trim. Tip: You can put grease on chrome/metal areas you don't want to mask off so you can wipe off the overspray of paint right off before the base/clear flashes.
After you’re all done wrapping whatever part of the car you want do you use a heat gun over the part you wrapped or no need to use a heat gun just on the edges ??
Perfect show i love it when someone explain thing in a very simple way for something very simple to do i seen people talk so much extra shit to make it seem so hard
It’s nice to see someone who’s kinda new at wrapping do a wrap I fell a lot more confident
Thank you exactly
Looool same here bro
Facts
Me to
exactly, instead of “ya so basically guys just put it right here and then peel it off and you’re done”
For everyone watching just remember to use post heat after installing it help the vinyl stick better and faster. Heat will tighten it so it enforced the longevity of the wrap
Lol
weird i thought cold tightens it heat loosen it
@@MoneyShifted he’s wrong, heat only helps in making it easier in applying it
Are you saying apply heat on the edges there after the Wrapp
@@yourmuda1188 so your saying heat don’t help the wrap last longer ? Wrap literally fixes itself in heat.
It looks easy but I am telling you guys , for a beginner with no experience in wrapping , this is very hard to do it alone. You better ask some one to assist you. 😀
I just did my roof and I looks like trenches with all the lines i left ( I’m gonna re do it all again but damn it’s an experience)😭 trunk came out great tho
Practice makes perfect
Get some good magnets
@@validatedcustomer604seriously I just did my door and it helped tremendously having magnets
He is doing a good job.
Bro keep the videos coming. This was great! Like someone else mentioned, it’s great to see someone relatively new to the wrap game do this, it’s more relatable.
Good procedure, very thorough.
I find wrapping a car more difficult than painting. You make it look easy. Thanks
Great to see someone who took time to learn how to wrap properly. Nice job! Hope to see more videos from you.
Very definitive video bro, really helped me out wrapping my own car hood from scratch
Bruh of almost all the videos I have seen CZcams about how to wrap this one is by far the simplest and well explained way on how to do this! Great job dawg we sure do appreciate the video!
Now this is a time saving wrapping job thanks man appreciate you
Dude, you make it look so easy.
Respect
Super clean, keep the videos coming RinoWraps will be up and moving in no time
Absolute great teacher better than a lot of more popular wrappers! Well done
I've got a fiberglass hood on its way, thanks for the video. I was torn between getting it painted (my paint isn't in great shape), or wrapping it in a carbon fiber, or subtle color. Good job, thanks for taking the time to record this.
Great tutorial and you gave me the confidence I needed to get my wrap on.
Great video man!!! Keep up the good work! Can’t wait to wrap my car in the future! Results came out great!
Lot more useful vid than the several I just watched. Thanks for sharing.
Nice video - well thought out and explained. I am about to wrap the hood on a 1995 Ford Bronco - and this really helps. Again - really well done sir.
Really like the way you present. You are down to earth while giving information on the techniques. Thank you for a video nicely done!
Bro that’s awesome can’t wait to see how this comes out and other projects you do🔥🔥🔥
Thanks bro!
Thank you so much, super informative, and great to see a novice, more or less, versus a professional shop doing it. Same gives me more confidence that you can do a great job even without a lot of experience doing it. Pretty sure I’m gonna do it myself now, instead of paying somebody!
Thank you for the support
Great job man. Happy I found your page. Just about to do my first wrap on one of my Rx7s to get it ready for 7s Day on my channel. Very inspiring video. 👏🏿 keep up the great work.
Hey nice job man. Keep up the hard work and dedication.
Bro you did a slamming job on that hood🔥I’m getting ready to wrap my Elantra soon thanks for the video💪🏾
I'm about to wrap my gti and this video has given me the most confidence so thank you
you are going somewhere with this wrap, keep growing
thanks man! you are a good teacher! appreciate the video.
Nice job my guy keep the videos coming💪🏼🔥
Bro, you made this look so easy. Nice work 💯💯💯
It helps a lot to have someone else helping you as well because by yourself, you can only pull in one direction, kind of, which causes the other side to make lines.
My guy................ You the man! You literally empired me. I can do that!
Great job man !👏🏾 nicely done
You explained this so well!! Better than most people
Appreciate the knowledge brother 🙏🏾
What a genuine nice guy
Canada here...yes lil brethren...good work, good vid...your calm on camera... time to think big...presentation, links, etc...big up
I was getting ready to comment that you should probably have a heat gun on deck and it cut to the part where you were using it lol. I have a black 2011 Cadillac CTS. I did a custom black mesh grill and deleted my chrome with 3M carbon fiber vinyl. 1080 or whichever one it was. It was the textured one, like real carbon fiber feel. That stuff is a real pain in the ass! No pulling up once it's down. Stretching will ruin the carbon fiber pattern. Squeegee a quarter inch at a time as you go type shit. It's an extremely sticky vinyl as well. Thought I would give you a heads up on that since you were cool enough to share your awesome video! Thanks bro, appreciate the look.
rad bro u killed it and convinced me to do the same .... peace n love stay safe keep it rad and build on broski ✌
the first i tried wrapping my car was in october 2022 and it took me 4 hours to do the hood of my car, until i gave up and went to a shop.
going to wrap my car myself and commit this time, so im glad i found this video.
I was hoping to see more videos. You did a good job. I hope you are still at it.
He got me wrapping my car❤❤❤❤❤❤❤❤❤had to come back and thank you 🙏
wow, looks amazing! Thank you for this beginners tutorial!
badass bro, learning to implement wrapping into my shop, learned a lot from here
I’m going to wrap my car for the first time. Thank you so much!!!! Great great GREAT video!!!
Keep up the good work, in life bro. You do good work, seem like a nice person. Big ups. 💯🤙🏻 stay passionate, stay diligent.
Thank you bro! This gives me confidence to wrap my car!
I learned a lot, thanks bro!
Great illastration young man. Keep up the good work.
Great Job on the Wrap Video! Very easy to understand.
thats a great Video I agree with the wrap experts nice shout out
damn dude first ever of how to wrap and you just saved me mad time that was perfect ! thnx
Hey bro!! Awesome video man, very informational and smooth guide. I’m about to do the hood on my wife’s Mazda 3 with Vivid vinyl wrap that I’ve been using for the last year or so. Love the videos man, keep it up!
Great video mate 👍 Can't wait to give it a go. Top job 🤜💥🤛
This man the only real DIY G on this platform! Thank you big bro! Links please for wraps and What you think is cheapest!
Thanks 🙏🏽 bro appreciate it good 👍🏽 video I’m going to do my hood as well I was a bit nervous 😬 but after watching this video it really helped me out 🔥🙌🏽❤️
Good job man fr!! You definitely helped me! Im jumping into this car wrapping thing on my own! Thank you 🙏🏾💯
No problem thanks for supporting!
Looking like a pro my guy!
appreciate you bro. keep it up
Good for u fam. That’s the way to run after something and make it happen. Congrats. No fear!
Hell yea ,great work.
That's kind of insane he did that hood solo. Respect. Normally you'd have a few guys to help stretch it out and lay
Welcome to the man's sphere where every man think's his way is better, good job brother.
Thanks for the How too! Dig your approach
Nice work man. I’ve been doing some small wrap projects and want to do a whole car now.
Thanks, that was a great explanation. I have never done a wrap and am trying out simple large decal(s), just not on a car.
so dope bro i wana wrap my truck so bad and now i think i can
Good stuff keep up the work all the best
Great video, thank you. I'm trying to get brave enough to try the hood wrap myself. We will see!
What a great job! It looks great. Now I am gonna try
I think everything so it sticks on good and doesn’t bubble up 🤷🏻♀️
Appreciate the video gave me confidents to do my stinger
Awesome work man
Impressive young man. Keep doing you.
WOOOW I'm ALUCINATING! KUDOS 👏🏼👏🏼! I feel like wrapping mine too, yes!! 😄🤪😜😉
good job young man. very good job. keep it up.
Looks amazing!
Yooooooo! That was dope!
post more man you could have a million subs
Dude ive watch tons of video and haven't seen anyone say damp the bottom of the vinyl witch makes it 1000 times easier thanks life saver
Not a good idea, water can be trapped in the air release pattern, you will void material warranty on most materials with a wet application of air release vinyl
For a first video, you did very well
got me to get some cheetah wrap too Rino appreciate the video homie
Much love my guy I’m bout to start wrapping
you hooked it man !
noice job good tutorial, i just cant tell if you are actually stretching the vinyl to the edges, usual you lift pressure before you get to your edges or the wrap is going to curl. other than that amazing job very good tutorial. keep it up my man.
Thank You!! Very nice job!! This totally inspires me!! I love doing auto body repair-yes bondo-the whole nine yards. But, I found a major problem when I painted. No matter how hard or what I tried it was never how I hoped it would be. Ya, sure they color match to the # on the inside of your car door BUT they don’t have that color paint after it’s been weathered for 5+ years. Totally didn’t match. The clear coat was not even close to gloss (as stated). So I believe this is an amazing alternative to hassling with paint and still getting that beautiful glossy look that all cars should have. Thank you!! Keep on rolling out the awesome tutorials!! 😁
I've seen prestigious auto paint shops get into crazy deep detail. i dont want to learn the ancient Chinese secrets to every color in the crayola box. I'm wrapping my shyt as well.
You can get a gun and base coat, clear coat, hardener, acetone/reducer, paint mask, and if you don't have one, a air compressor 3hp 25gal for under $250 and paint your entire car.
I've seen professional jobs done with $10 air guns with decent paint and pro passable with $50 air gun using rustoleum paint.
I've even seen an amazing job with rustoleum spray cans, used lime green about 8 cans for $70 and 2x clear coat cans that has hardener using around 6 cans. The 2X Clear spray used to be $10 ea but they went up to $15 ea which brings that up to $90
So it'll cost you around $190 to spray can your car if you include a duel filtered paint mask, sand papers 80, 160, 300, 400, 600 grit and 1/4" & 2" 3M masking tape. Use the 1/4" 3M autimotive masking tape for edges and bends and the 2" for connecting to news paper on windows/grill/plastic trim.
Tip:
You can put grease on chrome/metal areas you don't want to mask off so you can wipe off the overspray of paint right off before the base/clear flashes.
That looks great well done 👍
After you’re all done wrapping whatever part of the car you want do you use a heat gun over the part you wrapped or no need to use a heat gun just on the edges ??
Well done 👍🏻 brilliant video
You made that look easy bro been wanting to do my truck for a min 🥶
Helped a ton thanks please do a door panel guide!!!
Great Tips and info....💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾
thanks man, thats awesome
Nice work on the vid dude.
Nice video - You make it look easy
It’s nice good job and thank you for sharing the video 👍
Now I can do mine without being scared of messing up. 😂
I forgot to say great color and video thanks
Perfect show i love it when someone explain thing in a very simple way for something very simple to do i seen people talk so much extra shit to make it seem so hard
Wow turned out great
Thank you!
Ty for this! I'm going to try to wrap my own hood to cover some scratches.
We want more videos from u bro keep going
Thats the purple I need for my car