How To Make A Simple, Cheap & EXTREMELY STRONG Fishing Rod Rack That Will Last Forever!!!!
Vložit
- čas přidán 30. 06. 2024
- STEP-BY-STEP Build!!! In this video you will see just how easy it is to solve a problem many of us have. Too many fishing rods and no way to store them. If this is you then this is the video for you. Watch this video and learn how to build a rod rack that can hold as many rods as you like. Follow this easy to follow step-by-step video. This rack is budget friendly and will last a lifetime. Thanks for watching.
Supplies
- 1 x 4 Common Wood from Home Depot
- Wood Glue
- Trim Head Screws #6 x 2 - 1/4 for fastening the base board to the top and bottom shelf
- GRK Fasteners #10 x 3 - 1/8
TBNation: tbnation.net/products/t-h-mar...
TBNation 5% Discount Code Sitewide: BBF5
Please tap that like button and subscribe to our channel to stay up to date for future videos!!!
Top playlists on our channel:
Lowe 1448 Boat Conversion: • Jon Boat Conversion
Alumacraft 1232 Boat Conversion: • Alumacraft 1232 Boat c...
Pelican Bassraider: • PELICAN BASS RAIDER 10e
Vibe Kayak Mods: • Vibe Kayak Mods
Instagram: / bass_brothers_fishing
Facebook: / bassbrothersfishingdmv
Send us stuff at:
Bass Brothers Fishing DMV
PO Box 71
Spencerville, MD 20868
Email us at: bbfishing.dmv@gmail.com
Camera Gear
GoPro 7 Black: amzn.to/36Tt6Lq
Gopro 7 Silver: amzn.to/30P4tMj
External Mic: amzn.to/2GYgjg8
Lavalier Microphone Wind Screen: amzn.to/3lyMXnj
Rode Wireless Go: amzn.to/34HEwiY
Saramonic 3.5mm Plug and Play Mic: amzn.to/3iJUwpn
GoPro Case: amzn.to/3nEWwCX
Camera Video Light: amzn.to/3dgTpfI
Camera Light Rechargeable Batteries: amzn.to/36TCT4c
External Battery Small: www.amazon.com/gp/product/B00...
External Battery Large: amzn.to/3lDld0L
Rod & Reels
Lew’s Mach 1 Combo 6’ 10”: amzn.to/33MrQYx
Lew’s Mach 2 Combo 7’ 1”: amzn.to/3nG0CL6
Lew’s Mach Crush Combo: amzn.to/30RORHM
Drop Shot/Ned Rig Setup:
Lew’s Drop Shot/Ned Rod 6’ 10”: amzn.to/33MqQUh
Reel Shimano Stradic Ci4+: amzn.to/3lAighK
Plyers: amzn.to/36P8SCJ
Line Cutters: amzn.to/36UjYWT
Amazon affiliate links help to support the channel. You won't see a difference and it's the same products. Thanks for supporting our channel.
Disclaimer: I am not a professional fabricator or builder. Use these techniques at your own risk.
#jonboattobassboat #jonboatconversion #bassbrothersfishingdmv - Sport
Be sure to offset the bottom rail left or right a little to allow your rods to lean into the top rail. This will help to keep rods from sliding out of the top rail.
Sir, you did a great build and the video was straightforward and easy to keep up with.
My son and I are making this for my husband for Father’s Day following your instructions- it’s really easy thanks!
Awesome gift
Nice Video, nevertheless I would prefer, to do the bottom rack in a easier way: use two boards, in the upper one drill the same holes as done in the top rack and glue/screw a solid board below.
Great vid will be using this as a guide to make mine soon . Thank you
Looks great.
That looks great! Thanks for sharing.
A Forstner bit or clock makers bit would also do a great job on the base... (the bits are expensive, but cheaper than a router).
Nice!!! Thanks for the video!!!
Looks beautiful!!
Well done sir!
This is excellent, very pleased with the outcome
Great idea , well explained , so just going to have to pinch this ....off to the store for materials. ... THANKS.
That looks great. Thanks for showing us how you did that.
Cool 😎
Wow! Awesome job! I'll look at other how-to videos, but I'm quite positive I'm going to go with this plan.
Awesome. Be sure to offset the bottom rail left or right a little to allow your rods to lean into the top rail. This will help to keep rods from sliding out of the top rail.
This is great, thanks for theinspiration
Nice video. Well done and easy to follow along.
Can’t wait to build this
It's rock solid. Note: install the bottom shelve with a slight offset to the tip so your rids lean into the slots.
Great DIY video. The Rod Rack looks great on the wall. I will be doing something similar for sure in the near future. Thanks BBFDMV for another great one. Tight Lines!!!
Thanks Duane. This was way overdub than for me.
Best DIY video I’ve seen so far on a wall mount rod rack!
Just finished my fishing/work bench now it’s time to make a rod rack that will save me much more room!
👍🏾👊🏾
Looks nice and clean, good job.
Just decluttered my garage for my boat and this is a definite must make.
Thanks. This was a long overdue project for me. And besides, decluttered brain catches more fish. 🤣🐟🎣
Nice custom rod rack! Great addition to the "Macho Lounge"!
Ah ha. The Macho Lounge. Thanks.
Love your projects, Sir. Keep up the great work!
Thanks.
Very cool!
Thanks
I love this idea. I may build one of these. Great job. I build your motor stand too. (very close anyway...) Fish on!
Awesome man.
Nicely done. Great video too.
Thanks
Very nicely done sir!!
Tx 👍🏾
Great job 😊
Thanks
Hey bro I just started watching your videos,and I have to say they have gave me a lot of valuable information,thank you...keep up the great work.
I just go finished with my jon boat build,wish I could show you my VERY first build,I am proud of my self and my son.
Sounds awesome man. Would love to see it. Message me some pics on FB messenger or Instagram at Bass Brothers Fishing. The links are in the description of this video.
Nice job
Thanks
Material prices are crazy nowadays, so many projects you're better off buying online but I think this is much more robust for the price than an online option. Will be making one. Thanks!
Prices are actually going back down thank God. Check home depot and Lowes out. At least they are around here. Good luck.
If you are limited on ceiling height to fit the rods, one could build 2 of the top pieces and mount the rack horizontally on the wall. Love your DYI projects.... Keep'em coming.
Yea I might do that if I end up buying more 8 footers
Muy bueno !!!
Thanks.
and the action is perfect. put a small spinning reel on it with ...
Another great build
Thanks
Currently working on a boat project with my son not a jon boat but 16 footer I got all the info from you keep up the good work and I'll send you picks when I'm done
@@Mizzle6322 yea man looking forward to it.
Drill the end 2 bases right thru the timber and your 8’ rods will fit
Use a forster bit, very clean cut and no deep center hole
Don’t forget to use the space above your head for fishing poles also the space above the garage door.
NICE JOB, VERY PRACTICAL. PS, NEW SUBSCRIBER ‼️ Vinny 🇺🇸
Thanks. Welcome to the channel. 👍🏾 👊🏾🤙🏾
Nice vid! Guess no Tridelph this year... Maybe ill see you on RG. Tight lines!
I'm still hoping it will open up at some point.
@@BassBrothersFishingDMV me too, was starting to figure some parts of it out 🤣
Nice. I’m going to build this but, also use router to round off edges. Thanks .
what kind of table are you using in this video?
You might have enough room to sneak in the 8' rod horizontally back behind the vertical standing rods on the top rod support. 😎
That's exactly what I did lol
How long is your board?
So I'm counting a materials list of 4 1x4, screws and wood glue. Did I miss anything?? Your video seems pretty simple to follow, but any chance you have plans for this project?
I put items in the video description. I do not have a written plan for it but I made the video step by step so it should be pretty easy to follow.
@@BassBrothersFishingDMV thanks
I also have 16 active rods😂
I'm a simple guy. I see rod rack and I click like!
Who is the manufacturer of your workbench?
I bought this from Amazon. The bench is sold by Keter. Here is our affiliate link in case you buy it from Amazon. Using this link helps to support the channel's growth. Thanks for reaching out and watching our video. Stay safe!!! amzn.to/40god7q