Dude you rock. I put the edge of the tag in a vice and held the other end with pliers. Used a hand saw and cut through super easily. Lots of haters out there telling you to buy a $20 magnet. This method works in less than 5 minutes.
Wife just bought me a pair of swim trunks, and they didn't remove the security device. I didn't want to spend time sawing on it. I took it to the garage, and used my bench grinder, to take the nub off of it. Got it down where I could grab the spring with a needle nose pliers. I was careful to keep the material away from the grinder.
I have a ink device on my shoes but it never set off an alarm when I walked out of store. The box stayed in my cart when I checked out. I dont live close to the store but I don't want to mess up my expensive shors
No need to saw. Use an old steak knife and heat knife point red hot. 1/2 inch down from tip, push red hot knife perpendicular with the tip until progress completely around the tip, heating the knife point several times. Pry off the tip and remove spring and metallic elements. Pull the plastic components apart and discard.
No1 cares if the beepers go of if they chase u extra fun lol then take it off down the road or whatever before cops get ya coz then they see beepers nd ur fucked without beepers u can say u got it somewhere else
so ive watched about half a dozen of these now and yall are trippn. Take earth magnets (with enough pull force for say 12 lbs) and touch it to the "bildge" at the fron tof the device. From the back of the device push in, then pull out. The locking mechanism is a simple plunger thats released by magnatism. Regular magnets wont work, you can find rare earth mags on amazon for dirty cheap. I have a block with about 450 lbs of pull for 20 bucks
Can you show us how to do it in the shop, so we can steal the item, that's the reason of watching this, if you wanted the tag removed take it back to the shop if you had bought it
Jav Super star thats an amazing idea!! Too bad i live hours away from the store. My purpose of this video isn’t to be stealing! Its for people who don’t live close to the stores and simply need the security tag remove. Have a good day ! :D p.s if you even watched the video the receipts are literally right there 😂
Co ten koles wam poka,uje jak to wygląda gorzej niz amator normalnie zenada gdybym ja miałbym tak pokazywać jak sie sciąga te klipsy to bym sie spalił ze wstydu co zdjęcie tego i kazdego klipsa zajmuje dosłowne 1 sekunde .a tu gwiazdorzy jakis koles co pojecia nie ma o bozym swiecie
Dude you rock. I put the edge of the tag in a vice and held the other end with pliers. Used a hand saw and cut through super easily.
Lots of haters out there telling you to buy a $20 magnet. This method works in less than 5 minutes.
That's so funny I'm here because Sears forgot to take mine off as well. What's up with Sears slacking
EXACTLY THE REASON IM HERE -__-
Jc penny lackin too
Same thing just happened to to me today!
worked like a charm no magnet needed just a serrated blade and side cutters did the job for me whoever down voted is a theif.
Wife just bought me a pair of swim trunks, and they didn't remove the security device. I didn't want to spend time sawing on it. I took it to the garage, and used my bench grinder, to take the nub off of it. Got it down where I could grab the spring with a needle nose pliers. I was careful to keep the material away from the grinder.
thank you! I just got socks for christmas and they had a security tag on it just like that. this method worked for me!! :)
I ordered 80 dollar Levi’s pants from kohl’s I was so pissed when I see this thing on them . Thank you so much !
Same thing but i bought mine in store itself but the sales lady is so dumb not to take out those safety tag.
It did work! thank you!!!
Rex Erection 😱 hahaha nothing
Omg guys this worked Ty man
Thank you saved me a trip
Glad to hear👍🏼
So lagit this is the easiest way to remove it simple and pretty fast just gotta be careful on the burning part but for the most park worked great
I have a ink device on my shoes but it never set off an alarm when I walked out of store. The box stayed in my cart when I checked out. I dont live close to the store but I don't want to mess up my expensive shors
Where can I buy a magnet like the one you have?
Lmao everyome gonna head this on the store like how am i supposed to steal lol
No need to saw. Use an old steak knife and heat knife point red hot. 1/2 inch down from tip, push red hot knife perpendicular with the tip until progress completely around the tip, heating the knife point several times. Pry off the tip and remove spring and metallic elements. Pull the plastic components apart and discard.
Problem is. If you are trying to steal something. It's going be hard to do this. And get caught getting it off
No1 cares if the beepers go of if they chase u extra fun lol then take it off down the road or whatever before cops get ya coz then they see beepers nd ur fucked without beepers u can say u got it somewhere else
You don't need a knife or pliers... it only takes a second with a strong magnet.
You have a magnet! Haha
Thanks
Can you just heat the knife then cut the plastic part like a butter ✌🏻✌🏻✌🏻
I think I’ll just drive back to Sear’s to have them remove it. I don’t want to lose any fingers 😖
Really lol you can’t use a saw?
Why not just use the pliers to cut the little steel from the middle of the security tag??? Is that not possible?
I love how I'm bitched at for not knowing how to do this while the owner takes a nap....I guess I'm stupid and my life sucks....
so ive watched about half a dozen of these now and yall are trippn. Take earth magnets (with enough pull force for say 12 lbs) and touch it to the "bildge" at the fron tof the device. From the back of the device push in, then pull out. The locking mechanism is a simple plunger thats released by magnatism. Regular magnets wont work, you can find rare earth mags on amazon for dirty cheap. I have a block with about 450 lbs of pull for 20 bucks
So I dd's this just a ink device or is it also suppose to set the alarm off at entrance???
Both
Did ur magnet not work?
Funny thing is that you could've just used the magnet you have sitting on the table. Would've been removed in seconds
U could just melt it. Way easier.
Dude get a magnet
easy to do...not a big deal
Wear gloves while holding the device.
Can you show us how to do it in the shop, so we can steal the item, that's the reason of watching this, if you wanted the tag removed take it back to the shop if you had bought it
Jav Super star thats an amazing idea!! Too bad i live hours away from the store. My purpose of this video isn’t to be stealing! Its for people who don’t live close to the stores and simply need the security tag remove. Have a good day ! :D p.s if you even watched the video the receipts are literally right there 😂
@@ghost4life13 ha ha i was only joking
Omg dude, get a fucking magnet...
Co ten koles wam poka,uje jak to wygląda gorzej niz amator normalnie zenada gdybym ja miałbym tak pokazywać jak sie sciąga te klipsy to bym sie spalił ze wstydu co zdjęcie tego i kazdego klipsa zajmuje dosłowne 1 sekunde .a tu gwiazdorzy jakis koles co pojecia nie ma o bozym swiecie
Just drive back man