Video

Did ur magnet not work?

Wear gloves while holding the device.

You don't need a knife or pliers... it only takes a second with a strong magnet.

Dude you rock. I put the edge of the tag in a vice and held the other end with pliers. Used a hand saw and cut through super easily. Lots of haters out there telling you to buy a $20 magnet. This method works in less than 5 minutes.

Thanks

Thank you saved me a trip

Wife just bought me a pair of swim trunks, and they didn't remove the security device. I didn't want to spend time sawing on it. I took it to the garage, and used my bench grinder, to take the nub off of it. Got it down where I could grab the spring with a needle nose pliers. I was careful to keep the material away from the grinder.

Funny thing is that you could've just used the magnet you have sitting on the table. Would've been removed in seconds

Use a magnet, it will co.e off with one tap.

Co ten koles wam poka,uje jak to wygląda gorzej niz amator normalnie zenada gdybym ja miałbym tak pokazywać jak sie sciąga te klipsy to bym sie spalił ze wstydu co zdjęcie tego i kazdego klipsa zajmuje dosłowne 1 sekunde .a tu gwiazdorzy jakis koles co pojecia nie ma o bozym swiecie

U could just melt it. Way easier.

thank you! I just got socks for christmas and they had a security tag on it just like that. this method worked for me!! :)

No need to saw. Use an old steak knife and heat knife point red hot. 1/2 inch down from tip, push red hot knife perpendicular with the tip until progress completely around the tip, heating the knife point several times. Pry off the tip and remove spring and metallic elements. Pull the plastic components apart and discard.

Omg guys this worked Ty man

You have a magnet! Haha

I ordered 80 dollar Levi’s pants from kohl’s I was so pissed when I see this thing on them . Thank you so much !

Will you really keep crunching plastic while breaking the tags? They can hear you. We buy compact and powerful pullers here: shoplifting.tech Very easy to buy, a very smart seller and inventor.

so ive watched about half a dozen of these now and yall are trippn. Take earth magnets (with enough pull force for say 12 lbs) and touch it to the "bildge" at the fron tof the device. From the back of the device push in, then pull out. The locking mechanism is a simple plunger thats released by magnatism. Regular magnets wont work, you can find rare earth mags on amazon for dirty cheap. I have a block with about 450 lbs of pull for 20 bucks

Omg dude, get a fucking magnet...

You don’t need to do all that. Grab a drill and drill half way through the top and then it’s done. No Damage

Where can I buy a magnet like the one you have?

I have a ink device on my shoes but it never set off an alarm when I walked out of store. The box stayed in my cart when I checked out. I dont live close to the store but I don't want to mess up my expensive shors

So I dd's this just a ink device or is it also suppose to set the alarm off at entrance???

Lmao everyome gonna head this on the store like how am i supposed to steal lol

Just drive back man

worked like a charm no magnet needed just a serrated blade and side cutters did the job for me whoever down voted is a theif.

Can you show us how to do it in the shop, so we can steal the item, that's the reason of watching this, if you wanted the tag removed take it back to the shop if you had bought it

easy to do...not a big deal

Why not just use the pliers to cut the little steel from the middle of the security tag??? Is that not possible?

So lagit this is the easiest way to remove it simple and pretty fast just gotta be careful on the burning part but for the most park worked great

Bro all you need is a plastic bag.

Dude get a magnet

I think I’ll just drive back to Sear’s to have them remove it. I don’t want to lose any fingers 😖

One minute with a Dremel and cut off wheel.

This is the best wayczcams.com/video/8PN6-JjFJho/video.html

czcams.com/video/iLwpgvflMu4/video.html this is the easy way..

Problem is. If you are trying to steal something. It's going be hard to do this. And get caught getting it off

Can you just heat the knife then cut the plastic part like a butter ✌🏻✌🏻✌🏻

That's so funny I'm here because Sears forgot to take mine off as well. What's up with Sears slacking

It did work! thank you!!!

I love how I'm bitched at for not knowing how to do this while the owner takes a nap....I guess I'm stupid and my life sucks....

Si si listillo ,vete a robar a si con tanto ruido y me dices que pasa .mejor que le digas al dependiente directamente que te vas a llevar la ropa sin pagarla o que te estás haciendo una paja en el vestidor