I Helped Design This - Cooler Master MasterFrame 700 Prototype Preview - CES 2021
Vložit
- čas přidán 5. 08. 2024
- This project started out in 2019 and is finally about to see the light of day. Check out this hands on preview of the brand new Cooler Master MasterFrame 700 Open Air Frame case that we helped design.
BECOME A MEMBER: grsk.co/ytjoin
FLOATPLANE: grsk.co/floatplane
DISCORD COMMUNITY: grsk.co/community
PATREON: grsk.co/patreon
MERCH STORE: grsk.co/store
Some Cameras & Gear Used To Make These Videos
►Panasonic Lumix GH5
amzn.to/2mNQAfr
►Fujifilm X-T2 - amzn.to/2DyjQ1f
amzn.to/2DyjQ1f
►Panasonic 12-35mm f/2.8 II
amzn.to/2oriBVW
►Metabones SpeedBooster EF - MFT 0.71x
amzn.to/2twAF4H
►RodeLink FM Wireless Filmmaker System
amzn.to/2yKuI6b
We earn commission from any purchases made with the Amazon Affiliate Links.
Chapters
0:00 - Intro and Backstory
2:39 - The Wings
3:35 - Hinges
4:31 - Motherboard Support
4:47 - VESA Mounting
6:18 - PCIe Card and GPU Mounting
7:07 - PSU Mounting
7:24 - SSD Mounting
8:55 - Rubber Isolation Pads And Feet
9:19 - Radiator and Fan Support
10:02 - Motherboard Cutouts
10:42 - TG Panel
12:12 - Pricing & Availability
12:38 - How It Changed From Conception
13:22 - We Are Not Making Any Money From This Case
14:43 - More CES 2021 Content To Come
15:29 - Final Words
#coolermaster #mf700 #ces2021 - Věda a technologie
A test bench, water-cooled, fully modular coffee table that flips over into a touch screen monitor - awesome!
I honestly think it was amazing for idea Cooler master to collab with tech content creators to voice an opinion of what people want and not what they think people would want. Very cool to see my favorite tech channel was part of this project congrats you've come so far! Like I always say, you guys never fail to amaze me.
That looks unique, can't wait to see the build using this case
Congratulations! A great start on your design with Cooler Master mate! hope to see a full build soon with it.
Outstanding design, bruv!!!
I've actually been actively looking to procure a high quality, versatile test bench very recently and I'm so glad I saw that this may be coming to market soon. It definitely seems worth holding out for a bit for it to become available.
Very cool, congratz to you 2 and to everyone else involved. Cant wait to c wat u guys do with it next!
Dude, I cannot WAIT to see what you build with this rather interesting case. Cheers.
Can't wait to get my hands on one! I'm huge CM fan, and to see them do a collab with you guys is exciting! I have an old Antec Skeleton open air test bench type case and have been looking forward to a newer modern test bench case like this to come out.
As someone currently using a thermaltake core p5, this thing has my attention.
and I now have a new case to add to a list of cases I want. that looks amazing and so useful
Damn this case looks legit. Nice job fams, keen to see the build video's.
Can't wait to see a build with this case
Congratulation gear seekers, very proud of you. Good implementation right there
I want to see this in desktop mode and a monitor strapped to it. potentially a cool space saving beast PC.
This is awesome man! Congrats 👏
11:34 “has a lot of room for exhaust” that is what I call an understatement...
;)
Such a cool case with so many possibilities for customization! I just built a PC but it makes me want to build a new one.
Ok. This is pretty amazing, it seems the design will have everything necessary for a perfect build
This is awesome, great job niko
This case is amazing.
Cant wait to see a full build in this case.
This is amazing. I've been looking for a wall mount for my garage office - now I just have to be patient.
my current case is the H500m and i love it. i think the M700 could be the that perfect case for my new build. looks so cool. also fantastic to see coolermaster reaching out for help designing it
Can't wait for the new one :)
Soaring high with this design!
I thought the biggest surprise was going to be the vesa mount and monitor support but then the tempered glass!
Really looking forward to the upcoming build videos.
Wow there is a lot of innovation on this case. I think the hinges are a little outside of the design aesthetic, and I was thinking that the wings would go to 90 degrees, but the rest of it looks amazing. The tempered glass panel I think will also be divisive. Great work! Hopefully it isn't too expensive!
Very nice design!
Move over red bull, MF700 gives you wings now. Swiss army knife of open air frames. Good frothing. Keep it up fams
I think the VESA mount is present in order to wall mount it with a simple tv wall mount (like Thermaltake core)
this case with the tg panel will be a great coffe table for a playroom.
Im going to mount this inside a custom desk im building, saves me loads of work haha
Wow I’m really glad to see this video because I’ve been looking for a test bench case for a bit, so I’m really interested in seeing how it rolls into production. Also really glad it doesn’t have the big purple logo like in the thumbnail. Minimal, neutral branding is perfect.
This looks like the perfect case for me.
LOVE IT, I don't care how much it costs, I'll buy it instantly!
That is pretty cool.
Im ready to buy it now. LEGGO!!!!!
cooler master is changing! No more crap plastic fantastic! I would love this, much better than the yuel beast testbench
2:48 The MF700 in test bench mode looks abit like a manta ray from the front lol. The case looks absolutely dope!
Hi mate! I read that this chassis can handle 2 PSU but in its manuals it does not shows anyway to do it. Can you make a demonstration how do we fit 2 PSU at the chassis? Thanks in advance!
Oh, man! I would love to see one of these wall-mounted! Hardware Canunks said that CM only recommends a build under 14KG for wall mounting, likely for safety reasons. But you can get those safety anti-fall strap cables for wall-mounted TVs. It's just that I would love to use that case wall-mounted for a totally baller gaming set up!
I love the TD500 mesh and got it as my newest build. But have y'all missed the psu dust filter on the buttom? What is that thing?
Where was HC's input? I don't see any place you can mount a plant.
Don't worry about the negative comments.Keep up your good work👍
I'm not worried.
Temps will definitely be nice on that bad boy.
About to watch the video, I hope this has a Gear Seekers logo on it like what Der bauer did with the O11 series.
It says it comes out March 22nd? I hope so or I got duped да, I did a preorder ja. I was wondering with the standing up feature I and it's for enthusiasts that there is an option to side mount the PSU? I ask because I have a 1200w Asus rog... пока пока!
Finally received mine today... Great product quality. Better than most cooler master cases I've tested. Sadly, the vesa mount isn't included in the box. Unless I am blind. Also wish the little magnetic logo had the actual "Cooler Master" writen on it lol. Beside that, everything feels premium. Even the packaging is great!
Like the case. Hope the final offering comes with a bigger motherboard cutout on the back to facilitate access to cooler mounts, and option to mount power supply away from motherboard cutout like towards the front/bottom of the case. Great preview.
The PSU sits below the motherboard cutout, what he is using is the second PSU-slot if you need dual PSU-support for extreme overclocking rigs. The motherboard cutout is almost maxed out too, compare to the ITX MB-holes, was a trade-off between larger cutout or VESA mount. Looking forward to the full review!
Note how it says "PSU" on two locations.
@@leavikaso Good to know. Thanks.
like the reflection of the purple rgb 's on your ear lobes lol
*The music. The B-rolls.*
*G O D T I E R M A S T E R Y*
I got the inwin Alice based on your build. I'm keen to try this as a wall mount depending on seeing it built and if it takes a noctua d15
Gear Seekers Design is the best design.
Could you say what you specifically helped with? sounds fun!
I'll talk about it all in depth when we get out hands on a retail version. It will make a whole lot more sense that way.
any update on when you're releasing a build video for this case?
Waiting for some parts to arrive
I don't like that the wings have that pattern, so it partially blocks the airflow for radiators. I'd have to use brackets to mount radiators to the wings. Other than that, it's an awesome case. Looks damn expensive though.
Take my money. Take it now 💸💰
Can someone explain me the vesa mounting for that case? Can I mount this on the wall with that?
Yes, it is so you can wall mount the case flat on a wall with a sturdy VESA100-mount :)
@@leavikaso Ok, thanks
I thought you will review products of ces 2021 but instead you made one 😅😅😅
🤣🤣
Lot's more surprises don't worry :D
did you end up building in this?
Who is this type of case for?
The Same people who buy a Thermaltake Core p3, people who like displaying everything and don’t worry about thermals...
Is that the Scythe Screwdriver @ 6:00?
Take my money. Want one
I wish the area (flaps) for fans had better clearance , other then that would be nice!
I want one
When does it drop?
Congrats on your work, but for me it really looks similar to the Thermaltake Core P7 TG.
“A custom water cooled capacity” that would look cool though but if feels like it would be a pain to pull off...
Nah it will be really easy. Just wait ;)
Any comments on the review by Gamers Nexus? Thanks
"We can't wait to show you a build in another video..."
*Proceeds to still build out most of a complete build*
Great test bench all the way up to art installment AIO, thanks for showing us the whole run of it.
But can we talk about how crunchy your tunes are bruh? Keep it all coming. Can't wait for you and Klaire to engage cinematic mode on this one.
I feel like you should make a case you design it 100%
2:09 So it's an overview?
Why didn't you paint it white?
🤣
I know this isnt a review, but I dont think you should review since you helped design it; you could add bias (even if you try, viewers may see it as bias). Gotta say, great work there.
Nah we're just gonna build with it. There are a few things that they should have done that I did mention but again, this is just a prototype
I liked the case. But it needed serious modding. Basically cut the crap out of the wings to promote better cool. Reinforced back to better support wall mounting .
8:14 Shingled SSDs!
🔥👍🔥
Please tell me there will be a white version.
Probably not
If the wings are for mounting radiators why would they make them 75% blocked off 🤔
As mentioned. Many ways to mount rads. I only showed 1 way ;)
If I had the space, I'd get this case.
I believe people will wall mount this though.
lol just saw rocketjumpninja's mouse then this WOW!
12:55 is a banger
The airflow could of been a lot better through those radiator wings. No worries though, nothing some dremel work can't fix. lol
How much will it cost??
As mentioned in the video. I have no idea.
@@GearSeekers will there be a white version of the case 😅??
@@Randomchannel-000 ok, now that would look cool mounted on a wall in white
@@dragongeale0632 white blends with every colour 😁
@@Randomchannel-000 I entirely agree, and white can diffuse rgb lights which makes it better.
Now tell me who designed this huge psu box on the back side 🤷
Very nice!... But can I buy it off AliExpress for super cheap? :)
Shame we can't mount 480 XE radiators, I just bought two lol.
Ah yes, perfect for my imaginary graphics card
❄️☃️❄️
It is fundamentaly a Thermaltake core p7 refined.
It really isn't at all
I wish I could get a heart
the concept is similar to Thermaltake Core P7
It looks brilliant to build in though.
@@wazzuppoo Wow way to gatekeep. Let people like things mate and move on.
@@wazzuppoo that’s ur opinion not mine
Left wing and right wing. No love for the centre?
Umm... ring?
@@dragongeale0632 whoops!
@@MarcoGPUtuber it’s okay I didn’t even notice it said ring until I looked back through the comments.
Pretty interesting but too huge for me.
Hi
Oh hello there
Max froth.
Wow looks VERY similar to our ATLAS Chassis.. So odd!
damn lmao it does!
Pretty unprofessional to publicly imply CM copied your design. TBH the right thing to do would have been to contact CM privately and discuss the matter.
Agreed! How very strange!
THIS > NR200 LOL
But i'd like more with itx form factor
I´d but that for a dollar!
I love the case, but don't feel at ease with that glass panel solution
Just wait.
You are seriously underrated:( it shouldn't be like that