This Custom PC Build Came Out AWESOME
Vložit
- čas přidán 24. 04. 2021
- Expand for all links!
Sponsor: www.mmorc.com/sort-Software/
MMORC.COM: 35% Coupon Code for software: BAN35
Windows 10 Pro key: bit.ly/2YpuCx5
Office 2019 Pro Key: bit.ly/2YrqPiL
Office 365 Pro Key:bit.ly/31eHvLR
PARTS USED IN THIS BUILD:
AMD Ryzen 7 5800X: amzn.to/2QkbIJS
NZXT N7 B550: www.nzxt.com/products/n7-b550...
Cooler Master Masterframe 700: amzn.to/3saLXc7
Corsair Vengeance Pro RGB SL: amzn.to/3d9QKGp
Corsair SP120 RGB Elite: amzn.to/3mHyR4P
ASUS ROG Strix RTX 3060: amzn.to/3wLA1AY
EVGA 750 G5: amzn.to/2OFLReT
XLR8 CS3040 Gen4 SSD: amzn.to/2RrFgWp
EK Quantum Kinetic Reservoir Combo: amzn.to/3mDxXWZ
Corsair XR5 360 Radiator: amzn.to/2OFMwgn
EK Quantum Velocity AM4 Block: amzn.to/325wcsi
Follow me on Twitter! @BPS_Customs
Support the channel through the merch store: www.BPSCustoms.com
#CustomPC #Watercooling
My Gear List:
CAMERAS -
Sony A7 III: amzn.to/2K65VCS
Sony a6400: amzn.to/2tkqnJk
Sony RX-100 VII: amzn.to/2SHdfbW
LENSES -
Sony 24-70 f/2.8 GM: amzn.to/2th8xai
Sony FE 50mm f/1.8: amzn.to/2I2OUUW
Sony Zeiss 16-35 f/4: amzn.to/2LgobXp
Tamron 28-75 f/2.8: amzn.to/2MLKkzQ
AUDIO -
Sennheiser MKE600 Shotgun Mic: amzn.to/2qBE5kM
Saramonic RX9/TX9 Wireless Lav: amzn.to/2ML6Cl7
Rode NT1A Condenser Mic: amzn.to/2lFy0Te
Focusrite Scarlett 2i2 Audio Interface: amzn.to/2qbLNpX
TRIPODS & OTHER STUFF -
Dracast LED Lights: amzn.to/2tmmIqL
Benro S7 Tripod: amzn.to/2ym9kJ9
Manfrotto 502AH Fluid Head: amzn.to/2CGIs56
3Pod Orbit 4 Section Carbon Fiber Tripod: amzn.to/2eqlNkR
Manfrotto Be Free CF: amzn.to/2sCIf2a
Neewer C-Stands: amzn.to/36h2qRI
Production music courtesy of www.epidemicsound.com - Věda a technologie
I need an RGB extension for the CPU block, that's why the lighting is off. Other than that things went pretty well!
The soundtrack 👌. My wife asked if I was watching Flashdance 🤣
All this video needed was you running up some stairs at the end cheering at the end of that montage.
Neat build, man. I really like these cases that are open. Too bad having 2 dogs in the house would mean too much work to keep it clean.
cool build! also thanks for talking about the build process, including not having everything. i’ve made so many late night trips to best buy and microcenter hah
The montage music is giving me life this Monday morning in 2022. Just purchased this “case” to use as a test bench. Thanks for the awesome vids on it!
Love it, thanks for finishing it in just 2 videos. I hate when youtubers run into the slightest of issue and they're like "well that means we have to do another video"
Looks boss!!kudos!
Love it, been trying to get my hands on the n7 for weeks and it's been out of stock. looks great in your build!
Thanks! Good luck on your search
This build is so unique and that's why I like it! Good job Brian!
Just a heads up if you get into bios by just directly mounting the gpu in the motherboard you can switch the pcie slot to gen 3. Then you can remount it with the riser and problem solved. Doesn’t require a gen 4 riser.
Congrats on the build
love the "symmetry" with this cage/case!
Great build, Brian! I like the way the tubing runs turned out with the fittings at the bends. Oh, after watching the video about your RC car, I ended up getting a Traxxas Bandit XL-5. LOL It's a new, slightly upgraded, variation with a TQ 2.4 GHz controller. It's supposed to ship in mid May. There's no shortage on RC parts...... YET!
Sounds awesome! I have another RC video going up shortly
That is a gorgeous build
Looks scary. Like bumping the wing would break the tubes.
I think it looks great! Once you get the PSU sorted.. it will be a phenomenal build!
Can you give more info about the sensor panel?
G'day Brian,
Yep, You did an Awesome Job,
What I would do as a Future Upgrade is EKWB Velocity GPU Block, to connect it I would use the Radiator to Reservoir Tube to add the GPU,
so instead of it Parallel with the Top of the Motherboard it would run lower Parallel with the Top of the GPU (Just clearing the top of the GPU I/O Bracket), the same as & parallel to the CPU Tubes,
because the GPU Tubing would no longer need to cross over with the CPU Tubes this would also allow the CPU tubes to exit the Res & RAD with Fittings to match the GPU Tubing
Not for me, but glad you’re happy with it.
interesting case/bench.
Nice looking build. Couldn't you have installed the GPU directly to the motherboard, and changed settings in the bios to pci gen3, then installed the riser?
Yes for sure.
Isn't it a B550 board? The lower pcie ×16 slots should be gen 3 use one of those for the riser, get into the uefi and change the top slot to gen 3 and reinstall the riser in the top ×16. That should help with video signal.
Also, swapping between hdmi and display port cables might be something you could look into if the uefi fix does not get the result you need
How do the wings lock into place, can the hinges be moved or are they solid?
The hinges pivot but can be locked.
how do you move that PC around without the fittings coming off the tubes ?
carefully
The reservoir and radiator though🤣
What about them?
Everything else came out so clean but them mounted crooked just throws the whole thing off.
@@snuggietuggie I'm not sure we're watching the same video
0:49 look at the top of the reservoir and the top of the radiator.
This probably doesn't apply to your case - You probably have it fixed already - but just in case I thought I'd mention Kyle had an issue with a Radeon card that wouldn't display because the display cable he was using wasn't compatible.
More info on the sensor panel please!
I tried to post the link in the vid description but CZcams gave me a warning, they thought it was spam. It's on AliExpress. 8" sensor panel.
sorry but did i miss the part where you mention the screen make and model. or is it part two
I’ll add it to the description in a bit. It was from China
That’s freaking beautiful! Would a white graphics card be a little overkill? I think it would look decent
I kind of like it with the Strix card but a white GPU is always sex
I like the build excellence as usual
IMHO the 45 fittings in black match with the wing panel hinges that are also black
for me the GPU is the wrong one - to busy and gray NOT black / white I wonder something like the Gigabyte vision in white OR the powercolor red devil / Radeon 6800XT black edition
I am talking visuals and "dreaming" where GPUs are readily available
might not be a popualr opinion, but i really don't like the look of this case / chassis, but thanks for putting it all together so we can see what is possible. left a like anyway 😎
I don’t like the fittings I wind batter al black
Не эстетично трубки крестом
Can I please get a Gaming PC
Live your dreams
first yessir