Nissan Distributor DTC P0340 Camshaft Position Sensor(RSB-56).

The video is to address #diagnostictroublecode (DTC) P0340 which is a Camshaft Position Sensor for the Nissan Vg33e engine. The #camshaft #positions #sensor looks at the camshaft angle to determine when the intake valve is open or close. When the Intake valve is to be open, the camshaft position sensor signal the Computer(ECU) to operate the fuel injector for that cylinder intake valve, by spraying fuel into the combustion chamber. All the calibration for intake valve fuel cycle and valves close to detonating spark for power stroke timing. The camshaft position sensor signal piston position is reference to camshaft angle position. Since the Camshaft Position Sensor is located in the ignition Distributor, the video detail show how to remove the ignition Distributor and replace it with a brand new genuine Nissan dealer Part. The new distributor perfect ignition timing spark set for normal engine startup and drive sequence. Once the Camshaft Position Sensor begin to fail. the driver, operator will experience, the starter fighting with crankshaft faceplate flywheel, while trying to start the Engine sometimes.The engine will not start like normally should. Excessive key cranking are signs of partially fail CAM sensor. Engine stalling with difficulty starting are all signs. Not start when engine is hot. Or no start at all are all cause by CAM sensor or clog restrictive fuel filter: • How To Change Nissan F...
also suspect and diagnose other parts and circuit for fail parts leading to no engine start conditions: • Nissan Engine Not Cran... Always. Replace the complete ignition Distributor is the best way to be successful in the job. The ignition distributor is consist of many parts, not just the Camshaft position sensor is located in it. The ignition distributor is consist of ignition coil, Power Transistor, shaft bearing, Worn gear, rotor & cap plus completely assembled. Always replace spark plugs and its wires with new distributor for the best performance experience.
Understanding more information about the Nissan HEIgnition Distributor: • Nissan Ignition Distru... . Always best to replace the complete distributor, never just coil, power transistor or internal fail parts.
Another important video relating to the ignition Distributor: • Random Cylinder Misfi... . solving DTC P0300 is a Random Cylinder Misfire.
Thank you.
Please Enjoy, Like, Comment, Share and Subscribe.
#howto #nissanfrontier #diy #infinitivehiclerepair #nissanpathfinder #nissannavara #nissanxterra #autorepair #vg30 #v6engine #dtc #nostart #ignition #sparkplug #autorepair #nissanfrontier #nissanelgrand #paladin