Hello Mr! I really like your work and appreciate it. I ordered this panel and just to make sure - is the panel of the new msi mpg 341CQPX the same as this model? I don't need the extra 65 hz or power delivery of the USB type c :)
It’s a different, newer panel on the MPG model which is why it has a higher refresh rate. There’s no change to the pixel shape though so that’s the same as the older 175Hz panel used in this screen. Other differences are still to be confirmed but visually there doesn’t appear to be anything else beyond the higher refresh rate
I don't know if you intentional left it out or actually missed it, but with HDR active you can change the color profile. I personally find the Display P3 mode the most pleasing to my eyes, but of course I don't know how acurate that is. Unforturnately the OSD is not able to memorize different color settings for different modes, as in sRGB for SDR and Display P3 for HDR. You'd have to change it manually every time. Since I use the monitor mostly for gaming and mostly with HDR (especially nowadays where RTX HDR is available for games that don't support it natively) I left it at Display P3 in general. But I'd like to hear your opinion why the sRGB mode is recommended for HDR. Thanks in advance. PS: On second thought...I could just stick with the "User" mode in HDR, too. Should take everything I set up before over to HDR anyways. And I just had a quick glance, looks great. :)
Yes user mode would operate with the full native gamut in both modes. At the moment you’re right that the same mode applies to both SDR and HDR and so it’s easier to stick with a single mode. If MSI fix that via a FW update later on, you could maybe consider using sRGB then for SDR, but using the User mode is fine too
@@tftcentral Yes and thanks to your video I discovered that after using the monitor since March. So thank you. ^^ Regarding future firmware updates...I can't exactly explain why, but I don't expect any for this model. Last one is from February 2024 and feature-wise this gen1 panel is probably fixed and runs as it should. I don't expect them to add any features.
@GODzillaGSPB they could well roll out the bug fixes (like this colour space issue) which they’ve already done recently on their 27” and 32” MPG models but time will tell
You basically reviewed all the monitors I was interested in - Dell AW3423DWF, Philips Evnia and this MSI now. But can I ask why did you not review Samsung Odyssey G8? Your overall impression compared to the monitors mentioned above if you had a chance to use it would be much appreciated. They're all the monitors I've considered and was leaning the most to G8 because of the design but after your review of this MSI and this video I'm starting to consider 341CQP more and more.
Hello, does this monitor support 175hz with 10 bit colour range without any problems? I think we can only provide this with HDMI, right? Or does this monitor only offer 8 bit support?
I know it’s been a couple months but did any of the color profiles seem unplayable in your in opinion ? Premium color and both the game and pro user modes look fine, but the fps,racing,RTS profiles look broken on my model
I'm using a 24" VA panel monitor primarily for office and multimedia purposes, although I also play games occasionally. I'm interested in experiencing an OLED screen, but finding one in my country is very difficult and this model seems to be in stock. I've never used a wide monitor before. Is it really worth buying?
It’s really good and it would be a big upgrade from your current screen for sure. Here’s our review of that particular model The Best 34" OLED Monitor? MSI MAG 341CQP Review czcams.com/video/ZAHDv41SeN0/video.html
When i set the HDR to 'True Black 400' using the windows hdr calibration tools the peak brightness seems right at about 750, is setting it at 750 the right thing to do or should i move it to 400/450?
Hi @tftcentral - I seem to be having some issue with this monitor that I can’t find an answer to. When using hdmi 2.1 and attempting to play games in “full screen”, I’m noticing that the game loads in a smaller window. This problem doesn’t appear in “borderless full screen” and doesn’t appear on other ultrawide dive tested. I’ve made sure that the monitor is set to “pc” mode and have made sure that NVCP is set to “no scaling”. Do you have any feedback on this?
I use DP 1.4 with this monitor and I’ve had the same thing happen, but only with EA games, ie madden or pga tour. Once I click on the window, it goes to full screen. I think it’s more of a game setting trying to recognize the screen size than anything, but what do I know..
I just got the monitor yester and the picrure is not extended all the way to the right bezel. Missing like a quarter inch of screen and it is super annoying. Do you know how i fix this?
@calebs2crazy well there is supposed to be a black panel border around all sides. The image will never go right up to the plastic edge if that’s what you’re expecting and wanting?
Hello. I really want to know about the input lag but there is no such article or video on the Internet and unfortunately there is no reviewer from you (in my opinion, the most authoritative in the field of monitors) either. In general, my question is: It is known that CRT monitors have a minimum input lag, unlike other matrices, and thanks to it, the input lag is measured. But we also know that the input lag is directly affected by the refresh rate and technical characteristics of the computer. I also want to find out how much the input lag of CRT monitors changes when using adapters, because video cards with a direct port for vga have not been produced for a long time, and the best of them is 10 times weaker than the same RTX 4060, but as I wrote above, we know that the more powerful the hardware, the less input lag. Given all the above information, I would like to know which matrix will have a lower input lag, the CRT matrix 160 Hz or the OLED 240 Hz?
You can assume CRTs have no input lag, and can be used as a reference. I’m talking here about the delay caused by the display itself, not any other system latency metrics like graphics card, frame rates, refresh rate, mouse etc From there you can measure the lag of an LCD or OLED. Most modern gaming monitors like the 240Hz OLED have basically no lag at their native refresh rate, so both that and the CRT should be very low lag
Hello. I have a problem with HDR mode. When I enable it in Windows and I check in MSI monitor settings it's ON; but the colors are all washed out. When I disable it, the colors are so bright my eyes hurt. AM I missing something? Can someone help please?
That’s because with HDR enabled, windows desktop enters an sRGB emulation to handle SDR content and so will look far less saturated than the normal SDR mode where it doesn’t do that. Once you view actual HDR content mastered in a wider colour gamut it will show those colours more saturated again. Only enable windows HDR mode when you’re going to view actual HDR content
How strange. Maybe it’s variations in different regions in the firmware. The same settings are covered in the video so hopefully that can be followed instead
@@tftcentral Thanks for answer me. I watched the review and I know that panel is gen 1 and texts are nor perfect but imperfections wich text has are difficult to see. All I want are some images of words in word office (By example) to check by myself the issue of letters on this qdOLED panel. Thanks.
@aitorglez6719 I’m afraid we don’t have any photos of that and I’m not a fan of using them personally to try and demonstrate the appearance. But if you can find any review of a 34” QDOLED panel with pics like that, the panel structure is the same on them all anyway so that should tell you 😀
Thanks for the settings! The one I ordered arrived today and I'll be applying these straight away.
thanks for the guide. not gonna get this monitor, but viewing and commenting for the algorithm
I bought this monitor. But i cant set 175hz with msi hdmi cable. I have 7900xtx. (i see its ultra speed hdmi cable) Can u help me?
I solved. ı have to change hdmi 2.1 mod Console to PC
@@ahmetbitir6947 i was looking for this, thank you for sharing!
@@ahmetbitir6947 Thank you. I was wondering if its the cable issue. This should be said in the video tbh. or pinned at least.
@@ahmetbitir6947Can you explain more please?
I'd personally use display port
Hello Mr! I really like your work and appreciate it. I ordered this panel and just to make sure - is the panel of the new msi mpg 341CQPX the same as this model? I don't need the extra 65 hz or power delivery of the USB type c :)
It’s a different, newer panel on the MPG model which is why it has a higher refresh rate. There’s no change to the pixel shape though so that’s the same as the older 175Hz panel used in this screen. Other differences are still to be confirmed but visually there doesn’t appear to be anything else beyond the higher refresh rate
@@tftcentral Thank you very much! :)
I don't know if you intentional left it out or actually missed it, but with HDR active you can change the color profile. I personally find the Display P3 mode the most pleasing to my eyes, but of course I don't know how acurate that is.
Unforturnately the OSD is not able to memorize different color settings for different modes, as in sRGB for SDR and Display P3 for HDR. You'd have to change it manually every time. Since I use the monitor mostly for gaming and mostly with HDR (especially nowadays where RTX HDR is available for games that don't support it natively) I left it at Display P3 in general.
But I'd like to hear your opinion why the sRGB mode is recommended for HDR. Thanks in advance.
PS: On second thought...I could just stick with the "User" mode in HDR, too. Should take everything I set up before over to HDR anyways. And I just had a quick glance, looks great. :)
Yes user mode would operate with the full native gamut in both modes. At the moment you’re right that the same mode applies to both SDR and HDR and so it’s easier to stick with a single mode. If MSI fix that via a FW update later on, you could maybe consider using sRGB then for SDR, but using the User mode is fine too
@@tftcentral Yes and thanks to your video I discovered that after using the monitor since March. So thank you. ^^
Regarding future firmware updates...I can't exactly explain why, but I don't expect any for this model. Last one is from February 2024 and feature-wise this gen1 panel is probably fixed and runs as it should. I don't expect them to add any features.
@GODzillaGSPB they could well roll out the bug fixes (like this colour space issue) which they’ve already done recently on their 27” and 32” MPG models but time will tell
You basically reviewed all the monitors I was interested in - Dell AW3423DWF, Philips Evnia and this MSI now.
But can I ask why did you not review Samsung Odyssey G8?
Your overall impression compared to the monitors mentioned above if you had a chance to use it would be much appreciated.
They're all the monitors I've considered and was leaning the most to G8 because of the design but after your review of this MSI and this video I'm starting to consider 341CQP more and more.
Samsung never wanted to send it to us when it was launched and it’s now pretty old
In new zealand this on special for 1600 nz. Can't decide between this or the wide oled g8.
You probably wont read thid but worth a try should i use windows hdr calibration tool?
We did read it 😀 yes, worth running through that in HDR mode too
Hello, does this monitor support 175hz with 10 bit colour range without any problems? I think we can only provide this with HDMI, right? Or does this monitor only offer 8 bit support?
We cover this in our review here: This is the best 34” OLED monitor right now! - MSI MAG 341CQP Review
czcams.com/video/ZAHDv41SeN0/video.html
Great review
Review the Dell U4025QW 5k monitor
its some monitor bug ,then you launching game some games reverting to 3840x2160 at 120hz and displaying 16:9 format
I know it’s been a couple months but did any of the color profiles seem unplayable in your in opinion ? Premium color and both the game and pro user modes look fine, but the fps,racing,RTS profiles look broken on my model
Didn’t really use them much but they are just alternatives with different settings changed. Like sharpness etc. no real need to use them I don’t think
is it worth dropping down to 144hz refresh rate to get 10 bit color instead of the 8 bit at 175hz?
I don’t think so, no
MSI firmware v017 02/27/2024 mentions: "Optimized HDR EOTF Curve on “Peak 1000 nits” mode." Did this address your stated issue with HDR Peak 1000?
That will be the one used in the review if it was from late Feb
I'm using a 24" VA panel monitor primarily for office and multimedia purposes, although I also play games occasionally. I'm interested in experiencing an OLED screen, but finding one in my country is very difficult and this model seems to be in stock. I've never used a wide monitor before. Is it really worth buying?
It’s really good and it would be a big upgrade from your current screen for sure. Here’s our review of that particular model
The Best 34" OLED Monitor? MSI MAG 341CQP Review
czcams.com/video/ZAHDv41SeN0/video.html
@@tftcentral Awesome! Thank you for your reply.
Please do a settings video for G80SD.
So you recommend for HDR Pro Mode - sRGB, not User - User, like MEG 342C? This is most accurate color for HDR?
User mode for HDR mode yes, for full native gamut coverage
When i set the HDR to 'True Black 400' using the windows hdr calibration tools the peak brightness seems right at about 750, is setting it at 750 the right thing to do or should i move it to 400/450?
Just use the slider as guided and ignore the number it lists. It’s often wrong or misaligned
@@tftcentral Thanks for the fast answer!
What about in games? for example in RDR2 where i have to manually set the peak brightness
@lemasespandon again just follow the slider /guidance and ignore the number reported 😀
Hi @tftcentral - I seem to be having some issue with this monitor that I can’t find an answer to. When using hdmi 2.1 and attempting to play games in “full screen”, I’m noticing that the game loads in a smaller window. This problem doesn’t appear in “borderless full screen” and doesn’t appear on other ultrawide dive tested. I’ve made sure that the monitor is set to “pc” mode and have made sure that NVCP is set to “no scaling”. Do you have any feedback on this?
I use DP 1.4 with this monitor and I’ve had the same thing happen, but only with EA games, ie madden or pga tour. Once I click on the window, it goes to full screen. I think it’s more of a game setting trying to recognize the screen size than anything, but what do I know..
I just got the monitor yester and the picrure is not extended all the way to the right bezel. Missing like a quarter inch of screen and it is super annoying. Do you know how i fix this?
Likely the pixel shift function, extra room as it shifts around. Disable that in the OLED care menu and see if it levels it off
@@tftcentral it won't allow. Slow is the lowest you can do but it doesn't do anything. Still looks like an extra bezel outside of a bezel.
@calebs2crazy well there is supposed to be a black panel border around all sides. The image will never go right up to the plastic edge if that’s what you’re expecting and wanting?
@@tftcentral yeah I see the black border but right next to it is a small extra gray border from the uncovered screen itself
I was told this is a part of pixel refresh by a couple peeps online. I've experienced 2 other QD OLED ultrawides and have never seen it before.
Hello. I really want to know about the input lag but there is no such article or video on the Internet and unfortunately there is no reviewer from you (in my opinion, the most authoritative in the field of monitors) either. In general, my question is: It is known that CRT monitors have a minimum input lag, unlike other matrices, and thanks to it, the input lag is measured. But we also know that the input lag is directly affected by the refresh rate and technical characteristics of the computer. I also want to find out how much the input lag of CRT monitors changes when using adapters, because video cards with a direct port for vga have not been produced for a long time, and the best of them is 10 times weaker than the same RTX 4060, but as I wrote above, we know that the more powerful the hardware, the less input lag. Given all the above information, I would like to know which matrix will have a lower input lag, the CRT matrix 160 Hz or the OLED 240 Hz?
You can assume CRTs have no input lag, and can be used as a reference. I’m talking here about the delay caused by the display itself, not any other system latency metrics like graphics card, frame rates, refresh rate, mouse etc
From there you can measure the lag of an LCD or OLED. Most modern gaming monitors like the 240Hz OLED have basically no lag at their native refresh rate, so both that and the CRT should be very low lag
How do I change my response rate to the fastest possible like other monitors it will say slow medium or fast on this monitor it doesn’t
That’s not needed on an OLED monitor as the pixel response times are near instant as standard. No need for overdrive modes like on an LCD 😀
Hello this monitor work great with for nvidia cards gsync ?
Yes it supports NVIDIA Gsync
@@tftcentralbut people says when turn on adaptive sync oled care turns off its right ?
@umutnengin4951 no I don’t believe so. That would be very odd. No longer have the screen to be able to double check but that doesn’t sound right
Can you do a video like this for g95nc?
been seeing alot of horror stories about using HDMI and 10bit while gaming having issues. is the panel still great even at 8bit at Display port?
Yes absolutely. I doubt you’d be able to tell any real world difference between 8 and 10-bit tbh anyway
@@tftcentral awesome thank you
Hello. I have a problem with HDR mode. When I enable it in Windows and I check in MSI monitor settings it's ON; but the colors are all washed out. When I disable it, the colors are so bright my eyes hurt. AM I missing something? Can someone help please?
That’s because with HDR enabled, windows desktop enters an sRGB emulation to handle SDR content and so will look far less saturated than the normal SDR mode where it doesn’t do that. Once you view actual HDR content mastered in a wider colour gamut it will show those colours more saturated again. Only enable windows HDR mode when you’re going to view actual HDR content
i dont know why but i have the very same monitor and cant import your profile linked in the description
How strange. Maybe it’s variations in different regions in the firmware. The same settings are covered in the video so hopefully that can be followed instead
Hi, i got this monitor today, on Nvidia Panel i have 8 bit colors and i cant set it to 10, i can't find any solutions on internet
You can only use 10-bit up to 144Hz on this model as it doesn’t use DSC. At 175Hz you are limited to 8-bit only I’m afraid
I should add that if you have a graphics card with HDMI 2.1 output you can use that connection to support 175Hz at 10-bit
@@tftcentral that's why, im using DP at 175hz, but do i see the difference betweeen 8bit and 10bit?
@ChaosXIII I doubt you’d be able to spot any meaningful difference tbh
Hey buddy. What about "image enhanced" in the professional tab, what setting should we use? Thanks
I’d recommend leaving it on the default. IIRC that just artificially increases the sharpness
@@tftcentralNice. And HDMI 2.1 mod: Console or PC? What do you recommend?
@ArthurConradi depends on what you’re connecting 😀
@tftcentral My monitor is connected to my laptop. So the PC option is better, right? 😅
Also, I turned Adaptive-Sync option on...
@ArthurConradi yes
Are you going to do the settings for the 32gs95ue?
Possibly, once we’ve reviewed it of course 😀
How is text representation on windows 11 like word Office etc?
Check out our review of the screen linked in description for commentary on performance including office use
@@tftcentral Thanks for answer me. I watched the review and I know that panel is gen 1 and texts are nor perfect but imperfections wich text has are difficult to see. All I want are some images of words in word office (By example) to check by myself the issue of letters on this qdOLED panel. Thanks.
@aitorglez6719 I’m afraid we don’t have any photos of that and I’m not a fan of using them personally to try and demonstrate the appearance. But if you can find any review of a 34” QDOLED panel with pics like that, the panel structure is the same on them all anyway so that should tell you 😀
@@tftcentral Ohh it's true. Thank you ^^