Video není dostupné.
OmlouvĂĄme se.

Ortho BugClear & PGF Complete application. Mclane Reel Mower Grass catcher Modification. DW🌎 S2:E28

SdĂ­let
VloĆŸit
  • čas pƙidĂĄn 17. 08. 2024
  • In this loaded episode of DW🌎, Dwayne lays down 2 seperate granular application. PGF complete 16-0-8 goes down along with some Ortho Bug Clear. The heat is on the stripeaction is it full effect as Dwayne also shows a Mclane Reel mower Grass catcher modification.
    Email - DwaynesWorldLawn@gmail.com
    Equipment used
    - 20inch 7 blade GR series Mclane reel mower - Briggs and Stratton 550e motor
    - Reel rollers front roller assembly mated to California Trimmer split front roller only option
    Andersons SR2000 Spreader
    Mclane Grass catcher hack materials -
    Part ls list below is for 1 side. Purchase all parts in x2
    Hex head bolt 1/4"x 2" - Full treaded Bolt
    Flange nut with serration to mate to 2” bolt
    1" long nylon bushing - slightly larger than 1/4.
    Lock nut to fit at end of 2” bolt
    All parts can be found at Home Depot, Lowes, Ace Hardware, etc.
    Products used
    Scale - Etekcity Luggage Scale, Travel Essentials, Digital Weight Scales for Travel Accessories, Portable Handheld Scale with Temperature Sensor, Rubber Paint, 110 Pounds, Battery Included
    Andersons PGF complete - Non phosphorus formulation - 16-0-8
    Ortho BugClear - 2.3 lbs / 1000 rate
    Video timeline -
    00:00 - Intro
    00:25 - Video Overview
    00:44 - Mclane Reel mower
    01:28 - Grass Catcher Mod
    06:13 - Reel mowing
    08:10 - To catch or not to catch
    09:02 - Reel mowing cont.
    10:18 - Reel mowing results
    12:11 - Fertilizer/Bug Killer overview
    13:13 - How to measure granular
    13:43 - Ortho BugClear application
    15:42 - Mixing herbicide/Insecticide
    16:38 - PGF complete application
    18:22 - Granular application tip
    19:43 - Ego blower / critique
    22:34 - Video recap/Outro

Komentáƙe • 13

  • @markhouston4473
    @markhouston4473 Pƙed rokem +2

    Dwayne, I really enjoy your videos and content. You should have more and more subscribers, your videos are very well done for us DIY'ers

    • @dwaynesworldlawn
      @dwaynesworldlawn  Pƙed rokem

      Thanks Mark!!! Really nice compliment. đŸ‘đŸ» I’m sure as i put out video more people will subscribe. I do it for the diyer. Appreciate the support đŸ™đŸ»

  • @leeroyabrego265
    @leeroyabrego265 Pƙed rokem +1

    Lawn looks great Dwayne !! Almost time for Winter Rye !!

  • @jimmyedwards8262
    @jimmyedwards8262 Pƙed 10 měsĂ­ci +1

    Very good videos that should help me tremendously!

    • @dwaynesworldlawn
      @dwaynesworldlawn  Pƙed 10 měsĂ­ci

      I’m glad it helped you out Jimmy!!! I really appreciate the support!!!! đŸ‘đŸ»

  • @geomark8851
    @geomark8851 Pƙed rokem +2

    I enjoy your videos! Are you expecting rain from the hurricane? Funny, but I am hoping for a tropical wave to hit the Texas Gulf coast to give us a chance for rain Our last rain was .75 inches on July 3rd.
    Is there an anti McLane hack? I have the opposite problem- my catcher sits too high or, at least, sits at too high of an angle. I'm cutting my Zorro Zoysia at 1.7 inches and can only make two passes before the clippings start tumbling back out of the catcher. Longer catcher arms are what I need to let the catcher sit lower or flatter.

    • @dwaynesworldlawn
      @dwaynesworldlawn  Pƙed rokem +1

      Thank you for the comment. Yes we will be getting hit some rain according to the forecast. Maybe 1-2 inches which we never get during summer. As far as a anti hack, have you tried adjusting the catcher further back using the mounting bracket on the catcher. How often are you mowing? I know zoysia doesn’t grow at the same rate as Bermuda but curious if you are breaking the 1/3 rule and is why you have so many clippings?

    • @geomark8851
      @geomark8851 Pƙed rokem

      Thank you for replying so quickly and with good questions! I was mowing the Zoysia every 3 days and was removing less than a fourth of the blade each mowing. My Zoysia is (or was) thick and very lush. The problem is the amount that the grass catcher hods before spilling out. To give you an idea of the volume it will hold, I can compare it to my Toro Super Recycler bag. The Toro bagger holds twice the volume of the McLane. I have the McLane roller support rod on the lowest hole on the frame so the mower tilts up at the front and that is a major contributing factor in the catcher spilling out to the back.@@dwaynesworldlawn

  • @thomashanan1996
    @thomashanan1996 Pƙed rokem +3

    Nice spreader
. Do you use the cone much?

    • @dwaynesworldlawn
      @dwaynesworldlawn  Pƙed rokem

      I do actually. When i have a prill size either varies or is larger like when i used the Sta green natural fertilizer. For that fertilizer i turned the dial to a High number and move it to a lower setting when using pgf complete. It basically allows for better separation and better distribution of granular. I appreciate the comment and question!!! Thank you for your support !!! đŸ‘đŸ»

  • @randyvelarde7448
    @randyvelarde7448 Pƙed 11 měsĂ­ci +1

    What adjustments did you make for the basket hook. Mine is not easy to remove basket. I have to over tilt forward to remove. Doing this of course, empty’s grass on the mower. Help. Also, do u have ideas how to turn this mower w/out scuffing the Bermuda. Wish they’d make this mower w a drum roller. Thx Dwayne

    • @dwaynesworldlawn
      @dwaynesworldlawn  Pƙed 11 měsĂ­ci

      First and foremost, thank you for the question and comment. I remember when making the adjustment i needed to lengthen the arms meaning if i used the original position the basket would be too long. In the new position i would say that the back of the basket does sit at a higher angle which most likely affects the amount i can fill into the basket. I would say i do spill some of the grass out when taking the hooks off but always shake the basket after i remove the hooks to reposition the clipping further into the basket. I am not afraid to do this because i use the reel rollers grass topper and it will not spill out of the top.
      I will say that i do empty the basket more frequently than others not because it fills up too fast but rather i don’t want to have so many clippings in the catcher to where it weighs it down and can change the hoc because of the weight. I’m always mindful of this as some people have experienced scalping when you have too much weight on the front of the mower.
      As far as the rear wheel, i don’t have that issue very often unless it’s my fault. What i mean toward to end of each pass i raise the rear drop
      Wheel and turn the mower and then when I’m
      Lined up, i lower the rear wheel and they propel. If you press onto the clutch and drive the wheel before it makes contact with the ground it will dig into the turf. Also if you turn without lifting the drop wheel it can also teat up the turf. I hope this helps and feel free to email or respond in the comments if you have any additional questions đŸ‘đŸ»