Dirty Bike Talaria Sting Seat Riser! // We also install other much needed upgrades!
Vložit
- čas přidán 18. 06. 2023
- Thanks For Watching!
Please consider subscribing!
Dirty Bike Industries: americansurron.com/
Check out These Websites for awesome upgrades!
Luna Cycle: lunacycle.com/
GritShift: gritshift.com/?ref=33
E-bike Zilla: ebikezilla.com/en/
Warp 9: www.warp9racing.com/
Dirty Bike Industries: americansurron.com/
Stag Motorcycles: shorturl.at/iopE6
Great First Upgrades
Pro Taper Grips: amzn.to/3pPoVMm
Light Switch: amzn.to/42MnAEH
Upgraded Pegs: www.warp9racing.com/product/t...
Seat Riser Video: shorturl.at/bpJLZ
3 IN Riser Bar: amzn.to/3MhClbF
Brake Pads: amzn.to/43ahEF8
Tire Pressure Guage: amzn.to/427ebGs
Cool Upgrades
Decal Kit! Use Code TALARIABOYS to get 5% off! www.stickerfxgraphics.co.uk/
Seat Cover: motoseat.com/c46-e-bike
Gloves: amzn.to/435okF4
Check out our Bike Builds!
Reeds Talaria Sting R MX4 Build:
Decal Kit: www.stickerfxgraphics.co.uk/
Seat Riser Video: shorturl.at/bpJLZ
Warp 9 Axle blocks amzn.to/3BzrUv5
Warp 9 Stem: shorturl.at/yEFL6
Warp 9 Stem lock: shorturl.at/knsvD
Black Chain: amzn.to/437f5nf
Warp 9 Handlebar: shorturl.at/losVY
Warp 9Sprocket: shorturl.at/bwAMN
Lances Talaria sting R MX4 Build:
Decal Kit: www.stickerfxgraphics.co.uk/
Seat Riser Video: shorturl.at/bpJLZ
Ko Nano Controller: shorturl.at/yAW45
Manitou Dorado Expert 29: shorturl.at/vyBKR
Warp 9 Rear Rotor Guard amzn.to/3ImQCCv
Warp 9 Sprocket: shorturl.at/bwAMN
Warp 9 Axle blocks amzn.to/3BzrUv5
Warp 9 Stem: shorturl.at/yEFL6
Warp 9 Stem lock: shorturl.at/knsvD
Chain: amzn.to/437f5nf
Hayes Dominion brakes: shorturl.at/ivHVW
Brake Rotors: shorturl.at/iCQXY
Handelbar: shorturl.at/gpCDL
Light: shorturl.at/uLQU7
Peg Bracket: amzn.to/43fkKaX
Peg Brace: amzn.to/45lP8SX
Alex's Talaria Sting MX3 Build
Decal Kit: www.stickerfxgraphics.co.uk/
Seat Riser Video: shorturl.at/bpJLZ
Warp 9 Handlebar: shorturl.at/losVY
Shock protector: shorturl.at/bfqL2
Stem: shorturl.at/zABE1
Foot pegs: shorturl.at/agru2
Axle blocks: shorturl.at/bhAFV
Stemlock: shorturl.at/gwG46
Fork : shorturl.at/ghK12
Filming Gear:
GoPro Hero 11: amzn.to/3OqExAl
GoPro Volta: amzn.to/3pM1UtH
DJI Mic: amzn.to/42MSgFU
GPS Computer: amzn.to/3ImYuUz
Epic Drone Works: www.epicdroneworks.com/
Thanks For Watching!
Please consider subscribing!
Contact us @ Talariaboys@gmail.com
#talaria #surron #ebike #utah #trending #talariasting #dirtbike #emoto #foryou #talariaxxx #Talariax3 #talariamx4 #talariamx3 #surronx #foryoupage #talariastingr #talariar #stingr #fyp #shorts # foryou #utah #moab #ebike #electricmotorcycle , surron x, talaria sting, surron ultra bee, talaria xxx, talaria x3, electric bike, talaria boys, sur ronster, electric scooter, luna cycle, new talaria, review, ebike review, sting r, super moto, faster than surron, best electric bike, under $3000, xxx unboxing, xxx review, sting r review, talaria review, surron review
pin my first comment !
Yalls videos are so solid. Only people on youtube doing consistent talaria content which is helping grow the community. Keep the weekly uploads going!
I sold my KLX 300 Supermoto and wanted an ebike. You guys talked me into a Talaria Sting R. So I looked around CZcams for the best and most informative videos to learn about upgrades and aftermarket companies. Turns out, they are all on your channel! Keep up the detailed and awesome videos! You are the best!🙏👍🚲
Thanks we really appreciate that!
should always use the old bearing ontop of the new bearing then hammer it.
Really enjoying the content guys! Btw, those are "E" clips. Look at it, looks like an E. We use them all the time in the automotive industry. Knowing the correct name will make them much easier to find if you need too.
I'm using a shock sock, wraps around the shock instead of a mud flap. Seems to work fine so far. Would solve your problem of the mud flap being too short.
You can run the rear flap still. Just go to home depot and get some 2" zinc-plated mending plate (spray paint black) and some nuts and bolts and put it on 👍
Seriously you guys are the best!
lol.. i left the damn springs out as i had no idea how to put them in the new pegs.. glad i can add them in now.
Haha they’re sometimes a pain
Another great video
Those gaps under the seat riser look like perfect candidates for a 3d printed cover. Hmmm. Something like petg or asa would hold up well to heat and UV. Maybe stickerfx could offer a couple strips to stick on them to tie it in and make it look stock... hmmm
I really like the looks of the seat riser kit!
I'm sure that I'll have to go that route if I can figure out how to afford one of these bikes in the first place.
The Pegs that Reed got look like the hot set-up! Thanks for showing the bearing replacement!
I kind of have to believe that you make that inner fender flap work if you just found a couple inches of similar
thickness rubber flap to add little extension to the flap you purchased. Maybe a project for another day?
You'll have to let us know if you like the seat extension and if your brakes work any better with the larger rotors.
Is there anyway you could see if the Sting R seat frame will bolt up to the MX 3?I noticed that they are different part numbers and was wondering if that is part of the reason for the new flatter seat angle on the sting R. I also noticed the suspension triangle is different in the R. Maybe that along with the seat frame would help seat angle?
great vids
Also I stripped one of those two bolts that go into the seat / rear fender and into the plastic, it stripped in the plastic part ...I'm going crazy trying to figure out how to get it out now 9r the bolt off ..... Any suggestions?!😢
i run the same setup with the mud flap, just ziptie the top mounting points off of the brake light bracket, mount the bottom ones like normal, give the zipties a little slack so it isn't overly tight
Great work guys, again! I like that seat riser kit, be cool if they could make a little fairing or piece of plastic to cover the gap but still doesn't look bad, I'm all about stretched out ergos. Definitely like the longer fender, it actually looks more proportional. Rotors are a nice upgrade too, I had 2 piece rotors and upgraded pads on my Surron, worthy upgrade for sure. Keep it up guys!
Thanks! Glad you liked it
U could show also how to remove the cable of the backlight😢I’ve got 5 connector 1 is easy to take off but the other I really don’t know how to disconnect them
I used suction motors on liquid oils filtration systems for cooling units for gigantic machines
I always thought that kit looked too goofy but with your graphics it actually looks not bad at all!!
I see in the newer videos the seat extender isn't on the bike anymore. Does it have any issues? Why did you remove it?
I personally just didn't like the feel of the seat being taller, I rode it for about 100 miles off-road on 5 rides and just couldn't get used to the higher center of gravity when corning while sitting down. I know a ton of riders that really like it that don't ride as aggressive as I do or are even taller and want the added comfort.
Will the handle bar mod and seat mod allow me to ride comfortably at 6’2 260?
yes. or you could do peg lowers and the riser bar
With the seat riser can you use a bigger battery with the same lid? Like a chi battery? I’m trying to avoid the camel hump😭
It really depends on the battery and we haven’t tested so don’t really know for sure
How do you adjust the rotor? Do you have a video about that bro?
What are you trying to adjust? Do you mean straiten it if it bent?
You adjust the caliper to center the rotor in the gap equally left & right
Notice on more recent vids that you're not still running the seat riser? Issues? I really think a better design that closes the gap AND lifts the stock lid for 72v/54Ah battery would be awesome. Ultimately, them making different sized frames (S/M, L, XL) might be best (and then include stiffer springs to begin with). But saying that, it would be awesome for Talaria to start including 72V XBMX 9000 controllers on custom higher end bikes too. LoL.
Ya I ended up taking it off because I didn't like the way it made the bike handle when sitting down, my center of gravity felt to high then cornering.
was wondering same thing good to know
Next time, put the bearings in the freezer; it will help with the installation.
I love the talaria xxx so much, if only I could find a 100€/month purchase plan...
Can you fit the EBMX 72V 54AH battery with this riser kit without that that UGLY aftermarket 3D printed lid guys ?? TY LOVE THE CHANNEL !!
The ebmx 72v 42ah fits with no riser but the 57ah needs the lid extender.
is it true that the talaria r breaks easily due to the gearbox?
Not true
@@Talariaboys ty man i appreciate it I was about the buy the r but due to the tiktoks i was doubting it but now I’m gonna just send it dude
Sounds like we need to just order the seat and frame for the Talaria and OEM the rest ourselves
Lesgoooo
Do you find the bike is able to ride in the rain without problem?
Yea the bike does great and the fender helps!
Nice! Yall in Utah?
Yes sir!
Did you also raise the bars?
Yes the bars are higher than stock
Got a link?
Anymore major x3 content coming up?
Yea tons more! We’ve got big plans!
Just buy a silicon chopping board for $10. You'll get 3 out of it for a 3rd of the price of the mudguard.
I used a cut up old bicycle tube for a shock guard, and the included number plate mount as a fender extension, at a total cost of $0
That’s a good idea!
Motion industry
When’s the talaria xxx getting some upgrades 👀🤌🏽
Soon!
@@Talariaboys notifications active 🤌🏽
Riser kit is ugly would be better of there was a filler body panel
Looks horrendous
Not really some people love it
Functionality over looks..
It's a tool not a jewel! Let's be honest e-bikes don't look that great anyway 😂 . Thanks for the info boys definitely will be doing these mods! I am also 6'3.