Service your Yamaha YZF-R3 at Home. Step By Step Tutorial.

Oil and filter change on my 2022 Yamaha YZF-R3. These simple services should be done at home, it won't void your warranty, it costs WAY less, you won't need special tools, just a 12mm Spanner or Socket.
I take you through step by step how to get this done, it really is simple, anyone can do it at home and save a hundred dollars or more.
Just make sure you use the recommended oil and filter.
1. Run bike for a few minutes
2. Remove sump lug
3. Remove Oil Filter
4. Stand bike up straight to drain oil
5. Prime Oil filter
6. Fit new oil filter
7. Replace sump plug
8. Fill bike with new oil
9. Stand bike up straight to check oil level
10. Start bike and check for leaks
11. Reset Oil trip meter

[@Zemmyz]

I knew working on my wank arm would come handy one day

[@AussieMoto]

It’s not because we want to, it’s because we have to. 😂😂

[@covid2080]

Thanks mate saved me 300 bucks

[@wuvvbernardo9353]

Easy tutorial no bs! Simple words nice video mate !!!! 🤝❤️

[@AussieMoto]

Thanks mate, much appreciated.

[@thepenguin1562]

I had to buy a filter wrench because the previous owner of my r3 torqued it to well over 100nm for some reason, same to the sump plug so had to replace that too 🙃

[@AussieMoto]

That’s a fair enough reason to use a filter wrench, you’re excused! 😂😂

[@yvngxbambi4575]

@@AussieMotono not good enough. He must be a man😤😂

[@paulasch1104]

Omg thank u so much for that explanation! I have nobody around me that’s into bikes and could show me but I love doing stuff on my own!! Thats real helpful

[@lukezhang3715]

This is the video that convinced me that I can do it myself too! Ordered my oil change package last night and can't wait to do it. Thanks mate.

[@AussieMoto]

How did it go? No dramas i’m sure?

[@lukezhang3715]

@@AussieMoto Was worried a bit that I might need a grip strengthening tool and a few weeks to unscrew the filter, but turned out OK. Everything worked fine in the end😃

[@Moto_Ryder95]

Typical Aussie Dad!! I love it 😂😅

[@girlandherguitar]

Loved those safety gear sandals! I just traded my 2011 CBR250R for the “bike of my dreams”, a 2022 R3 60th Anniversary Edition. Wow. I love it. Just under 1000 kilometres in just over a week. I plan to do all the servicing myself but am sitting on the fence for the first service and may take it to my local dealer for that one. Great video! Subscribed.

[@AussieMoto]

Bloody beautiful!!!

[@Vtecyo81]

Thankyou so much, it's so easy & I am definitely doing my own oil & filter changes myself from now on!!!!

[@AussieMoto]

My pleasure!

[@itznottoah]

Thanks mate this is bloody awesome! 🤣

[@crimsonn.outlaw]

Thank you!

[@fredeal_6782]

I was about to change the oil because the indicator window showed there was no oil but I didn't know it needed to be upright to show the right amount 😅😅

[@PUKUCHUU]

Nice

[@jamesharword3739]

As much of a man that I am, this filter shit is tight af

[@AussieMoto]

😂 bro sometimes they are too tight, but it’s fun to stir people up from time to time.

[@shrinathbhistannavar2729]

good job

[@AussieMoto]

Thanks!

[@Whmst]

appreciate it brotha!

[@AussieMoto]

Thanks mate! My pleasure.

[@jesselozoya2794]

Thanks man💪🏽

[@AussieMoto]

My pleasure!

[@martinkalinowski2195]

great videos mate!!

[@AussieMoto]

Thanks mate!!

[@durrymcflurry3028]

Super helpful, cheers mate love the jokes too haha

[@blackdiamond_7659]

I found this guide very hard.. every time I try to watch it in the garage on my phone it gets to around 10seconds into the video and then have to turn my phone off and go outside. Any advice on how to get past that part?

[@manishsinghrathore1]

guitar and bike. u r me!! 👍

[@AussieMoto]

Haha thanks!!

[@ParadiseBiker]

Your sense of humor alone have me cracking up😂.. #BeAMan

[@found.4536]

Great video but what do I do with the old oil and filter? I heard you can recycle the oil some places but can the filter just go in the dumpster?

[@AussieMoto]

Drain the filter for a couple of weeks, upside down, into your oil drain pan, then it can be thrown away. Or talk to your local mechanic and see if they mind you dumping a couple litres with them every now and then.

[@privateviewer904]

where do you dump the old oil?

[@rorisangmoale978]

Hi there, I have a 2023 R3 which I bought new and the oil light came on just after 1000 KM, any pointer of what could be the issue or recommendations.....Thank you

[@AussieMoto]

The R3 oil light comes on after a pre-determined amount of k’s not because the oil is low. It comes on to let you know you’re due for a change.

[@kushpaladin]

change the oil sooner during the first oil change. your oil will having little specks in it, basically metal shavings from breaking in the new engine. it clears up after that first oil change

[@FleXiTun]

Should i take in my bike for the 4,000 mil(5,000 km)service? Or should I do it myself?

[@AussieMoto]

Get into it and service it!! If you’re unsure then book it in but it really is as simple as I show in this vid.

[@AnflanneurProduction]

I bought a new R3 and the dealer didn’t give me the Manual book

[@AussieMoto]

You can download it, just google it.

[@kushpaladin]

what u need the manual for? my manual says the oil filter needs 17 N.m (13 ft lbs) and oil drain bolt needs 20 N.m (15 ft lbs) but i never torque them. i just tighten with an adjustable wrench

[@DanielHernandez-jx8zy]

some one know about it the torque on sump lug

[@kushpaladin]

tbh torque isn't necessary just tighting it is enough but manual says oil filter = 17 N.m (13 ft lbs) and drain bolt = 20 N.m (15 ft lbs)

[@001Yome]

U r hilarious dude loll

[@AussieMoto]

😅 thanks mate. 👊

[@Vtecyo81]

How many litres do you need to do a oil change??? Awesome video!!!

[@AussieMoto]

2.3L is all she needs. (A little bit less if you’re not also changing the filter - but it’s easy and cheap so you might as well always do filter.)