TREADLE LATHE

Sdílet
Vložit
  • čas přidán 1. 07. 2017
  • Finally got around to making a foot powered lathe for our homestead. The frame is a mix of yellow pine and red maple joined with through wedged tenons, draw bored tenons, and half lap joints.
    The flywheel is made of reclaimed red oak from an old house down the street. Three layers are glued and screwed together after being edge joined with tongue and groove joints making a very heavy and stable wheel. The crank shaft and headstock pulleys axle are just some half inch steel rod running in bearings.
    Plans for a similar lathe can be found in Roy Underhills book “the woodwrights guide”

Komentáře • 647

  • @danieldowning4583
    @danieldowning4583 Před 6 lety +2

    With just a little use and age on this piece Mr Chickadee, this lathe would look very much 150 years old. Genius. Great work. Roy Underhill would give high marks for this one. The tranquility of your videos is so mesmerizing, it all most seems like you are right in the shop watching. If there were such a thing as smell o vision, with the odor of wood I would feel like I were actually there.

  • @jackstrubbe7608
    @jackstrubbe7608 Před 4 lety +11

    I grew up in a water-powered sawmill in Ohio in the late 40s early 50s, and falling upon these videos is a joy. Simple, silent joy. And cats! Wood shavings, the scent of different woods, and freshly brewed dopplebochs. And cats. Thank you.

  • @twitchyflash333
    @twitchyflash333 Před 6 lety +58

    I love how it's all done as if power tools weren't a thing. So mesmerizing.

    • @TechTins_Projects
      @TechTins_Projects Před 2 lety +4

      When the oil wells are dry everything will be hand made during daylight hours.

  • @TromboneRockGod
    @TromboneRockGod Před 7 lety +35

    To come home and find a :20 min Mr. Chickadee video just
    brightened up my whole day. That lathe is insane, wow, thank you Mr.
    Chickadee...

  • @ashadowawhisper
    @ashadowawhisper Před rokem +2

    I made a treadle large several years ago and I will say this, if you use a 5/8” shaft for your spindle you can get your hands on some Shopsmith accessories like a drive spur that slides onto a straight 5/8” shaft and even some spindle adapters for a 1” x 8 tpi spindle thread for being able to use scroll chucks.

  • @ledzeppelin6662
    @ledzeppelin6662 Před 5 lety +8

    Well where shall I start! I have never been so mesmerised by ANYTHING! The perfectionism,craftsmanship and slow but sure way you work is such an inspiration to me! I never knew woodworking could be so serenely satisfying, and I've been a carpenter for 30 years! I'm gradually changing the way I work to your methods and it just feels fantastic! Please keep posting more brilliant videos Mr Chickadee,you are the ultimate craftsman👍.

  • @Rick_Sanchez_C137_
    @Rick_Sanchez_C137_ Před 7 lety +1

    I loved the video, can't wait until next week's video...treadle powered band saw, table saw, planer, jointer, router table??? Then in a few months I expect you to open a maker space using all your hand tools and the treadle powered ones in a timber framed shop.....I can't wait to become a member....

  • @iamwhoiam4410
    @iamwhoiam4410 Před 7 lety +6

    You're the true meaning of a craftsman. Thanks for sharing and keep your breathe of fresh air coming for us pro woodworkers.

  • @kathilisi3019
    @kathilisi3019 Před 3 lety +2

    My great-grandfather was a carpenter. I remember his workshop and his hand-crafted tools. He had a lathe that looked similar to this one. Watching you work makes me imagine my great-grandfather at work when he was young, 80 or 90 years ago.

  • @lolabunny087
    @lolabunny087 Před 7 lety +113

    Please please make a silent walkthrough of the workshop and the new house .. let us see all the great work that you have done ... :D .. God bless you and your family ...

    • @imKenyo
      @imKenyo Před 7 lety +4

      nice, good idea

    • @wxfield
      @wxfield Před 7 lety +14

      Alternatively, you could just watch all his videos with the sound off.

    • @alessioragazzi9036
      @alessioragazzi9036 Před 6 lety

      lolabunny087 qqq

    • @briarfox637
      @briarfox637 Před 6 lety +7

      I think he meant a video showing a walk through without narration.

    • @unit0033
      @unit0033 Před 4 lety

      lol

  • @peterstewart3563
    @peterstewart3563 Před 7 lety +17

    I like the way you work. Calm and unpretentious. Is an inspiration.

  • @taxidrivercarl6074
    @taxidrivercarl6074 Před 4 lety +2

    Nice to see someone who can use traditional tools and techniques.
    More skillful and more importantly, more peaceful than screaming machines

  • @pauloflynn3365
    @pauloflynn3365 Před 4 lety +1

    I have watched many hours of your work over the past few months and each project is as relaxing as watching snooker. Thanks and looking forward to more.

  • @calvincollison9182
    @calvincollison9182 Před 4 lety

    Mr chickadee, not the first time I've watched this video. As always beautiful work! I just want to say, I an sooo jealous of all your beautiful old planes, saws and all your old tools! Just beautiful!

  • @JeepTherapy
    @JeepTherapy Před 7 lety

    Recently I have been watching just about all of your videos. I like how you don't talk much. Just work. Like my dad and neighbor used to do. Thank you for all the information.

  • @HangingWithEpstein
    @HangingWithEpstein Před 3 lety

    When I saw that modern screwdriver.... I felt betrayed, like I want my money back. LoL 😂😆
    I love these videos, the guy is very good. We need more people to learn these skills!!!

  • @yummboy2
    @yummboy2 Před 7 lety +18

    An amazing video to watch! Your skill with hand tools remains entirely impressive. Your mortise and tenion joints are as close to perfect as I have ever seen. Not only are you skilled, you are talented! Thanks so much for sharing this excellent craftsmanship!

  • @ClintRoseCarving
    @ClintRoseCarving Před 7 lety +56

    Brilliant, that double through tenon at the start fitted very nicely indeed! Just a testament to what you can achieve with the silence and mastery of hand tools. Great as always.

  • @majigaining
    @majigaining Před 4 lety +1

    If carpenters can be prophets (pun intended), you are definitely one for me. You spoke no words but between your impressive physiques and passions you have convinced me to pick up the hand saw more often and go easy on my circular saw.

  • @kevinhicks5143
    @kevinhicks5143 Před 7 lety

    the master of all carpenters would be proud , I hope you have a son to pass down your awesome skills

  • @jupitersailing
    @jupitersailing Před 5 lety

    Such pure peace: just the sound of a person expertly working wood to create something which creates more beautiful things. The whole situation is perfect.

  • @scottjones3966
    @scottjones3966 Před 7 lety

    I'm convinced you could build a bulldozer with a handsaw and drill at this point and fire it up and drive away. Truly one of the most talented and ingenious people I have ever seen. Thank you for the videos. I always enjoy them and the random cat shots...

  • @christina9alls
    @christina9alls Před 3 lety

    At the time of commenting, this video is 3 years old.
    How could I have not seen this before now? I absolutely LOVE watching awesome stuff... It's like CZcams doesn't know me at all!

  • @moldingpro7208
    @moldingpro7208 Před 7 lety +2

    You are a Master Craftsman, as well as an Artisan. Thank you for sharing your amazing skills with us! Blessings!

  • @beepseatsfindingfoodtreasu8756

    I used the spring pole lathe for years after I watched Roy build one. Now id Like to try a treadle with a cast iron flywheel, just to try that also.
    Thanks Josh and your wife.
    You guys really do have great videos👍

    • @brucea550
      @brucea550 Před 2 lety +1

      Spring pole is simple and quicker to build maybe, but this is nicer because your workpiece is 100% clear all the time. I wouldn’t want to try to make something like a rolling pin on a spring pole and trying to make a smooth cut from end to end.

  • @Nguroa
    @Nguroa Před 7 lety +30

    The craftsmanship is just something that is lost in this modern world of ours. I really enjoy your vids and look foreword to more. Even with all the cats blatantly scene stealing.

  • @yonihales9133
    @yonihales9133 Před 7 lety +4

    Even the cat was "relaxed entertained"..
    Some how something about the work (process) is spiritualy reflective to watch ; the process is as "wow" as the finished project and after the vid ends it leaves me with a scence of getting gently set baxk down, would love to work at this shop as a sweaper

  • @Hirotechnics
    @Hirotechnics Před 6 lety

    Gotta respect the craftsmanship in this. I can easily imagine a lesser craftsman slapping together something like this super quick, but you took the time to think it out and make it look good and work well. That's superb; keep it up!

  • @mattschoon6940
    @mattschoon6940 Před 6 lety

    impressive, now if only wood bearings were possible....mind blown

  • @barkbuster350r
    @barkbuster350r Před 7 lety +1

    Best videos on CZcams!!! Thanks for sharing.

  • @hetedeleambacht6608
    @hetedeleambacht6608 Před 9 měsíci

    weaving loom, sewing machine, treadle lathe......all the same mechanisms! brilliant, thanks for showing us

  • @clutions
    @clutions Před 6 lety

    I'm drooling over your #71.

  • @julianeaston8607
    @julianeaston8607 Před 5 lety

    Pure Master-Craftsmanship, has to be the number one near silent video on CZcams. Such a wonderful change to see a beautiful item created purely with non powered hand tools and just the natural sounds of the workshop. An almost meditative quality about it.

  • @villain1409
    @villain1409 Před 7 lety +14

    I have watched a great deal of these builds,this 1 is a true master piece. It reminded me of the old treadle singer sewing machines. Thank you very much for your video & time.

  • @twentyonetwos3967
    @twentyonetwos3967 Před 7 lety +5

    Amazing what you do with a few sticks.
    Thank you for sharing.

  • @subrosa7mm
    @subrosa7mm Před 4 lety

    Like the guy below. Found this video at 5:35am. However. I have kids to take to school. But this was enjoyable and satisfying to watch!

  • @danaharris503
    @danaharris503 Před 7 lety

    Thanks for another great video. Love all your traditional tools, and the skill in which you use them.

  • @flightofarrow
    @flightofarrow Před 7 lety +1

    I did some wood working today,watching this I realized what I was really doing was scab working some wood together,thanks! great work!

  • @jimhicks2976
    @jimhicks2976 Před 7 lety

    I love watching your videos, your craftsmanship is pure artwork. Thank you for keeping the old way alive.

  • @rick91443
    @rick91443 Před 7 lety +1

    Amazing...20minutes,34 seconds of pure food for the soul. Thank you...rr

  • @gh0stmast3r
    @gh0stmast3r Před 6 lety +1

    I like your aversion to power tools

  • @underclass_zer0274
    @underclass_zer0274 Před 7 lety +19

    Great work. Even the cat at 7:30 seems amazed.

  • @thelearninghomestead3266
    @thelearninghomestead3266 Před 7 lety +2

    Once again, your skill set and craftsmanship amaze me! Well done.

  • @pebblesthecat3625
    @pebblesthecat3625 Před 4 lety

    Your apprentices are very attentive, paying close inspection to your every move - as did I. Your woodworking skills are so impressive and give me something to aspire to. Thanks for the great video and sharing your knowledge.

  • @user-wc7vp1fy3w
    @user-wc7vp1fy3w Před rokem

    J'aime énormément votre savoir-faire et le calme que vous dégagez! Merci

  • @noisebox9529
    @noisebox9529 Před 7 lety +2

    I didn't know what a Treadle Lathe was before watching this. Now i need one, and know how to build it without electricity.

  • @earthsciteach
    @earthsciteach Před 3 lety +1

    Your joinery work is insane. I'm trying to train myself to not think about the end result, but focus on the individual step (in most things I do). You have great focus and patience. Love watching you create!

  • @szermierz7798
    @szermierz7798 Před 4 lety

    What an amazing project, simply wonderful, I can't get over the admiration for your skills in using hand tools.

  • @gerrithoevers
    @gerrithoevers Před 4 lety +4

    Wow is all I can say. That is master craftsmanship at its finest.

  • @youngiecoveman2393
    @youngiecoveman2393 Před 7 lety

    Greeting from Scotland. Great to watch a craftsman at work and to hear the sound of these sharp cutting tools at work.

  • @Chr.U.Cas2216
    @Chr.U.Cas2216 Před 5 lety

    Simply fantastic and unbelievably brilliant. Thanks a lot for making, taping, editing, uploading and sharing.

  • @aserta
    @aserta Před 7 lety

    Top notch! Really nicely done on the big wheel, i think this is the first time i see someone carve the groove as opposed to simply spinning it and then carving it. And i have to say i like this method better.

  • @jacobopstad5483
    @jacobopstad5483 Před 4 lety +1

    I love the way everything fits together so snugly and with pegs and things.

  • @ksingleton101
    @ksingleton101 Před 7 lety

    I love your video's! The mere fact you don't tells us this is the best or only way to do things speaks for itself, if that makes since. It's as if I'm looking not what's inside the box but what's outside, thank you.

  • @167curly
    @167curly Před 3 lety

    Very simple , yet very impressive.

  • @ianhunt9520
    @ianhunt9520 Před 7 lety +56

    Can we all please just agree that Mr. Chickadee is the manliest man who has ever maned?

    • @matthewmarting3623
      @matthewmarting3623 Před 7 lety +7

      Teddy Rosevelt. And then there's the guy who took Rosevelt hunting and killed a grizzly with a knife. But Mr Chickadee is right up there.

    • @annasophia7977
      @annasophia7977 Před 7 lety +1

      Ian Hunt isnt he great? the videos change the tone to my day :D

    • @JacobvsRex
      @JacobvsRex Před 6 lety +2

      If he would grow that beard out then he'd be there. But he's humble, so he doesn't so as to leave that title to someone else....

    • @carolewarner101
      @carolewarner101 Před 6 lety +7

      LOL! Pretty impressive craftsman for sure! To me at least, there's nothing more admirable and valuable than learning how to make and do things yourself. Most of us have traded our lives (time) away for a pay check to buy everything we need or want. IMHO, that deadens the soul and makes us basically helpless without cash in the bank. To have knowledge, skill and a set of decent hand tools, he can start with felling a tree and basically make/build anything he actually needs to live. That's so incredibly rare in a first world country in this day and age.
      Mr. Chickadee is keeping his life/time for his own use and experiencing the joy, satisfaction and pride of craftsmanship and doing for himself for next to nothing in cash outlay. It's truly inspiring!

    • @cavemanjoe7972
      @cavemanjoe7972 Před 5 lety +5

      When he was eight, he got into his dad's wedged-tenon medicine cabinet and accidentally opened a can of Man, spilling it all over himself.
      He made his first mallet that night before bed, and this channel is simply his re-creation of his pre-teen years.😁

  • @jeffledlow1955
    @jeffledlow1955 Před 6 lety

    As per expected, once again, you sir have failed to disappoint with your skills!

  • @bordenfleetwood5773
    @bordenfleetwood5773 Před 6 lety

    If I become half as competent with my leather as you are in wood, I will be a happy man. Excellent craftsmanship!
    I'm sure there are mistakes - there always are; but it works, and it will hold up to decades of use, if not more. (and it would likely take either yourself or a master craftsman to point them out)
    I'm also more than a little envious of your tools. The specialized planes and that beautifully robust bit/brace, especially. Wondrous tools, in the hands of an excellent craftsman. Truly inspiring. Thank you!

  • @aaronthomas8834
    @aaronthomas8834 Před 5 lety +1

    The most tranquil videos on youtube, man. That cat staring into the camera, too good.

  • @longhaulblue1145
    @longhaulblue1145 Před 4 lety

    Not so primitive technology (the channel). Lol. But same idea. No talking. Just doing. And seeing what one can accomplish with primitive tools. Primitive Technology is a lot more primitive but I'm not comparing. Just enjoying the clever, the perseverance. A reminder of how we as a species got here. Great job!

  • @tinman1387
    @tinman1387 Před 7 lety +1

    Impressive! I for one hope you never run out of projects. I really enjoy watching your videos.

  • @ivanalexander7405
    @ivanalexander7405 Před 5 lety

    Thank you for your videos! I learn so much from you, and the quality of your videos is astounding.

  • @geodezix
    @geodezix Před 7 lety +1

    You are the go-to-guy for powerless technology!

  • @sicklibra8850
    @sicklibra8850 Před 6 lety

    The sheer skill with those hand tools is downright amazing.

  • @GruyereEmmentaler
    @GruyereEmmentaler Před 5 lety

    I really admire your technique. Especially the minimal but strategic use of glue and hardware.

  • @KelikakuCoutin
    @KelikakuCoutin Před 4 lety +14

    This reminds me of the lathe that the
    Woodwright, Roy Underhill made on
    one of the PBS shows that he does,
    quite a while back. You two should
    get together! בס״ד

  • @donaldcarbone2593
    @donaldcarbone2593 Před 4 lety

    Lots of talent and patience.

  • @dalyjolly5891
    @dalyjolly5891 Před rokem

    What an amazing thing to see this come together. Thank you.

  • @sammy8152
    @sammy8152 Před 7 lety +1

    Awesome, like watching your craftsmanship. Appreciate your time and effort.

  • @jaymc8722
    @jaymc8722 Před 5 lety

    Incredible! I'm both blown away and inspired. 👍😃

  • @davidfairman5461
    @davidfairman5461 Před 6 lety +2

    I'm looking to build one of these myself n now I've seen how it can be done. Thank you for an excellent video.

  • @kingpen
    @kingpen Před 6 lety

    As an admirer of traditional craft, I must tell you that this was satisfying to watch! You have yourself a subscriber!

  • @RonaldLAbbey
    @RonaldLAbbey Před 7 lety +2

    SWEET lathe!!!! Cant wait to see all the projects you make with it.

  • @johnhammack12
    @johnhammack12 Před 7 lety

    Glad to see the traditional wood working being used today.. you are a joy to watch... but do you ever make a miss lick...lol..if not i guess that's where the ol saying comes from... SLOW AN STEADY WINS THE RACE.. looking forward to your next video...

  • @georgejohnson1537
    @georgejohnson1537 Před 7 lety

    wow.....You're one amazing carpenter/craftsman... You have a skill set that I can only dream of. Thank you for posting these videos. Have a great day man!

  • @mst5632
    @mst5632 Před 6 lety

    Great job. Beautiful craftsmanship.

  • @mitravesia1738
    @mitravesia1738 Před 7 lety

    Good morning Mr. Chickadee thanks for your videos, I have been very helpful. I am doing the windows of my house with recycled pallets. I admit that I am not a professional carpenter. I am an apprentice and that is why his videos have served me a lot. Wife and gaticos. I have already grown a lot

    • @MrChickadee
      @MrChickadee  Před 7 lety +1

      Gracias por los comentarios. Me alegro de que usted está haciendo sus propias ventanas, que es un gran logro. No soy un miembro de la comunidad Amish aunque les doy respeto. No he hecho un ejercicio manual pero filmaré el proceso si lo hago en el futuro. ¡Sigue trabajando y ama el trabajo!

    • @mitravesia1738
      @mitravesia1738 Před 7 lety

      Mr. Chickadee gracias por responder a mi pregunta una saludo a usted y su familia .soy fiel seguidor de sus vídeos lo considero mi mentor

  • @grunthostheflatulent269

    I don't know what you do to make them work together so efficiently..
    By the way, another ingenious build - I learn a lot from you, Sir -- Thank you - sincerely!!

  • @buynsell365
    @buynsell365 Před 6 lety

    Great Job !!! One of the best builds I have seen. More videos like these please.

  • @huuthong1015
    @huuthong1015 Před 7 lety +1

    it is a great job. it reminds me how people did wood turning long ago before application of electric motor. thank you very much

  • @wtchtower
    @wtchtower Před 4 lety

    Thanks for Sharing once again. Your awesome Mr. Chickadee. Wish I could build one on my own someday. All I need is to draft it at start and have the needed tools and materials to begin with. Keep the good work.

  • @jlinkels
    @jlinkels Před 6 lety

    Amazing. Especially the flywheel. As simple as a wheel might be, it takes incredible accuracy to make it run true as this one does.

  • @stanleyjones2085
    @stanleyjones2085 Před 7 lety

    Wow what craftsmanship, truly awesome!

  • @galenlong1441
    @galenlong1441 Před 6 lety

    Fantastic video, very interesting subject too.

  • @SethsProject
    @SethsProject Před 7 lety +5

    Wow what an incredible tool! Fantastic job :)

  • @ikust007
    @ikust007 Před 4 lety

    Thank you for giving the reference book. Bravo.

  • @brendonceccato9663
    @brendonceccato9663 Před rokem

    Awesome! Good energies from Brasil! Thank you! 🇧🇷

  • @ufukgunes6592
    @ufukgunes6592 Před 5 lety

    Excellent workmanship

  • @TheNateTake
    @TheNateTake Před 7 lety +51

    That is awesome!

  • @rowdytriesstuff9173
    @rowdytriesstuff9173 Před 6 lety

    The level of patience to make things this way must be incredible

  • @kevinwoodcock7578
    @kevinwoodcock7578 Před 7 lety

    Functional and elegant . Outstanding work.

  • @kyleaegis5613
    @kyleaegis5613 Před 4 lety

    Best part at 7:30! The entire video was mesmerizing! Wonderful craftsmanship!

  • @jamesmitchell5013
    @jamesmitchell5013 Před 7 lety

    I really enjoy the way you let your work speak for itself. I find myself trying to second guess what you are building only to be wrong most of the time! Keep up the good work and videos please.....

  • @darinhumble4656
    @darinhumble4656 Před 7 lety +2

    This is really cool. I love how you make all these great things with the vintage tools. Old tools are just so cool and satisfying to use.

  • @DownwardsRising
    @DownwardsRising Před 5 lety +4

    I did not know that tongue and groove board edging could be done with hand tools. I always thought they were a modern milling type accomplishment; only doable with table saws and routers. Mind expanded.

    • @samfarina
      @samfarina Před 4 lety +3

      Look up the Stanley #48. Has a fence that flips so you can do tongue and groove with one plane.

  • @timeverett5482
    @timeverett5482 Před 7 lety

    Great video and craftsmanship. I wish I had just five percent of your talent!!!

  • @mikesmicroshop4385
    @mikesmicroshop4385 Před 7 lety

    Great job!!! You should change your tool rest design so that you can move the rest as close as you can to the work without it hitting and still able to leverage your tools. In the last shot of you turning your tool was very over extended. You have much less control on the tool and much more likely to have an accident. Love the design of the lath, I have built, well I don't know how many actually over the years now. Have fun turning on it, there is something magical about a foot powered lath!!!!

    • @MrChickadee
      @MrChickadee  Před 7 lety

      Thanks, yes Ive never turned before, and the tool rest was modified just as you said right after the video haha. I can see other more powerful designs in the future for sure!

  • @you_are_cleared_hot6950

    Love your work Marine! Add this to the pile of things to build!

  • @rafaelmonteirorodrigues4672

    I've been watching since about 16k subs, and it's a joy seeing you guys accomplish so much. Keep up the good work !

  • @mrstandfast2212
    @mrstandfast2212 Před 4 lety

    Wonderful project, I love the use of the tongue and groove planes and you've got great firefighters as a result.