Video není dostupné.
Omlouváme se.

Program Dodge RAM Service air suspension error C2212, C156E Ride Height System Calibration

Sdílet
Vložit
  • čas přidán 15. 09. 2023

Komentáře • 10

  • @matthewvarga435
    @matthewvarga435 Před 8 měsíci +1

    Hi, very interested to know what scan tool are you using?

    • @globalcommerce7654
      @globalcommerce7654  Před 8 měsíci

      globalcommerceca.com/products/lauch-based-automotive-diagnostic-tool-all-makes-and-models

  • @RCjunkie
    @RCjunkie Před 4 měsíci

    I have a 2021 Ram 1500 that will not hold the last setting. It keeps going back to the mid setting. as soon as you start to drive. It also is a 3.0 ED. I like the ride to be at the lowest setting. It held this till I got into a small hit on the front end, now back from the shop it will not hold the lowest setting

  • @user-xk2ub8gl4i
    @user-xk2ub8gl4i Před 6 měsíci +1

    I have a 2014 RAM 1500 Limited. Do you have to have a full nitrogen tank for this? I changed out my air compressor a few weeks back, and I need to refill my tank.

  • @valentinkaspervk
    @valentinkaspervk Před 9 měsíci

    Hey cool Video!! You know what you're doing... I'm not...
    Can you tell me which Values i have to enter in my 2016 Rebel?? Is it the normal height or which one?? Please help me... I'm struggling with this since Months...
    Greetings from Austria

    • @conspiratio
      @conspiratio Před 7 měsíci +1

      72mm vorne und 68mm hinten sind die Standardwerte. Die kannst du auch nehmen, wenn du sehr eben stehst. Genau genommen wird gemessen und dann eingetragen. Vorne: Radmitte zu Boden - Kontrollarmschraube zu Boden. Hinten - Höhe der Schraube des Arms.

  • @douggregory887
    @douggregory887 Před 7 měsíci

    Does the vehicle need to be running while you’re doing the calibration?

  • @aa5carserviceandparts244
    @aa5carserviceandparts244 Před 6 měsíci

    Hi