hello, I saw that you were doing a lot of videos on the joyor brand, it's rare, tell me, do you think it's possible to connect an alarm box to a joyor s5, if so, on which socket. thank you in advance you are almost the only one to make videos on the continuous joyor brand thank you
You just want to power the alarm, right? Is your scooter S5 or S10? How much voltage can your alarm withstand? 12v-90v universal? The 5 small wires between the controller and the light control module. Among them, red and black are positive and negative. It has power all the time. Will not lose power after shutdown. But its voltage is not 12v, but 48v, or 60v. So, you can also take power directly from the wire of the charging port.
Hey man, I have a question recently that you can say the website that I order my parts for the Joyer S 10 S electric scooter is no longer able to get parts from my scooter no more and I wonder if is there any other websites that I can buy parts for my scooter, and I live in the USA and the website that shut down is called vigscooters just a fyi
Because the front motor works and then it does not work. It works for a little bit of the time and then the code pops up and then I’ll let it sit for a couple hours or until the next day and it does fine and then the cops back up. Again?
The wires that control the front motor on my S 10 S electric scooter the little plastic adapter with the really thin wires. Could that be the reason why I have a code and code saying e-11 because of the plastic adapter for the front motor.. I did checked the green, yellow and blue one and I did not say see nothing wrong with them, but I did not check the little plastic send wire one
I was wondering if you can demonstrate what are all of the error codes because the manual does not say it do you have a video with all of the error codes that the S10 s that electric scooter has..
Sorry, because the studio's sample scooters do not have error codes, so I can't show you one by one. But for a list of error codes please read: ERRO 1: Motor failure ERRO 2: Accelerator throttle failure ERRO 3: Controller failure ERRO 4: Brake failure ERRO 5: Undervoltage protection ERRO 6: Communication failure, the display cannot receive the output from the controller ERRO 7: Communication failure, the controller cannot receive the output from the display
Hi, I appreciate your video. I need to replace my light controller. I tried to purchase one on todimart - But it cannot be shipped to my address in the USA. Any suggestions?
Hey brotha I have a problem,the scooter as soon as it picks up a lil speed it slow down,like it doesn't want to keep going, but when stop, then give throttle again it does the same thing.
I don't quite understand the specific situation. But you can try replacing the controller. Usually the speed instability is caused by the controller. czcams.com/video/gwCDBapyXZ8/video.html
@@todimart5933 I'm sorry it was one of the settings I messed with,now its running, So you said that I can plug it as soon as I get home and nothing will happen, right.
Ok Thxs 🙏🏽I will look at it a little later today when I looked it up online, it did say it could be Communication failure between the controller and the display idk tho
@@angelboyette208 It is not necessary to open the motor, just check the plug between the controller and the motor. If you can't find anything abnormal, then turn on the motor last. Video of turning on the motor: czcams.com/video/7uYqcSkKl2k/video.html
hello, I saw that you were doing a lot of videos on the joyor brand, it's rare, tell me, do you think it's possible to connect an alarm box to a joyor s5, if so, on which socket. thank you in advance you are almost the only one to make videos on the continuous joyor brand thank you
You just want to power the alarm, right? Is your scooter S5 or S10? How much voltage can your alarm withstand? 12v-90v universal? The 5 small wires between the controller and the light control module. Among them, red and black are positive and negative. It has power all the time. Will not lose power after shutdown. But its voltage is not 12v, but 48v, or 60v. So, you can also take power directly from the wire of the charging port.
Awsome
Thank you for the video. It helps me a lot. Do you have any video with checking battery for s5?. My scooter doesnt turn on
Hello. Do you have a link where I can order this module in th3 U.S.?
Hey man, I have a question recently that you can say the website that I order my parts for the Joyer S 10 S electric scooter is no longer able to get parts from my scooter no more and I wonder if is there any other websites that I can buy parts for my scooter, and I live in the USA and the website that shut down is called vigscooters just a fyi
Which Power can do the light Module?
Because the front motor works and then it does not work. It works for a little bit of the time and then the code pops up and then I’ll let it sit for a couple hours or until the next day and it does fine and then the cops back up. Again?
How do you turn on the light in General? Guess Im too stupid too find it
my joyor s10s has an error message called e-05 what does that mean
The wires that control the front motor on my S 10 S electric scooter the little plastic adapter with the really thin wires. Could that be the reason why I have a code and code saying e-11 because of the plastic adapter for the front motor.. I did checked the green, yellow and blue one and I did not say see nothing wrong with them, but I did not check the little plastic send wire one
Sorry, I don't quite understand what you mean, please contact after-sales customer service WhatApp+8613486928696
I was wondering if you can demonstrate what are all of the error codes because the manual does not say it do you have a video with all of the error codes that the S10 s that electric scooter has..
Sorry, because the studio's sample scooters do not have error codes, so I can't show you one by one. But for a list of error codes please read:
ERRO 1: Motor failure
ERRO 2: Accelerator throttle failure
ERRO 3: Controller failure
ERRO 4: Brake failure
ERRO 5: Undervoltage protection
ERRO 6: Communication failure, the display cannot receive the output from the controller
ERRO 7: Communication failure, the controller cannot receive the output from the display
can u do a video installing a solid tire on the motor wheel
czcams.com/video/dZiBNL87n9Y/video.html
Hi, I appreciate your video. I need to replace my light controller. I tried to purchase one on todimart - But it cannot be shipped to my address in the USA. Any suggestions?
website issue. please contact the seller
Hey brotha I have a question, is it bad to plug the scooter in to charge after a short ride.
Lithium batteries have no memory function. This means that there is no need to wait for the battery to be completely drained before recharging
@@todimart5933 i appreciate your knowledge my brotha,already have my seat on,followed your steps and it came out great
Hey brotha I have a problem,the scooter as soon as it picks up a lil speed it slow down,like it doesn't want to keep going, but when stop, then give throttle again it does the same thing.
I don't quite understand the specific situation. But you can try replacing the controller. Usually the speed instability is caused by the controller.
czcams.com/video/gwCDBapyXZ8/video.html
@@todimart5933 I'm sorry it was one of the settings I messed with,now its running, So you said that I can plug it as soon as I get home and nothing will happen, right.
@@ivanuniversal3863 ??? you can contact me via whatsapp +8613486928696
where can I purchase this part.
please contact after-sales department. they may provide it for free
e- 11 code idk what that mean on my joyor s10-s i don’t know how how to fix it
front motor hall wires issue
Ok Thxs 🙏🏽I will look at it a little later today when I looked it up online, it did say it could be Communication failure between the controller and the display idk tho
I’m gonna look for what you said you said the wires going to the front motor may be the problem. How do I fix that or look for that problem?
Pls don’t tell me that I have to open the front motor.. if I do hopefully you can make a video 😬
@@angelboyette208 It is not necessary to open the motor, just check the plug between the controller and the motor. If you can't find anything abnormal, then turn on the motor last. Video of turning on the motor:
czcams.com/video/7uYqcSkKl2k/video.html