You figured that out yet I know what’s up with it it’s a tiny middle bolt on the front of it. If it comes completely loose your whole clamp and a plastic thing in the middle will fall out.
Hello ! In advance thank you for the video. Could you please let me know what is the size of the puller ? m30x?? I am looking for information concerning thread pitch (m30x1.5 or m30x2 or m30x3?)
@@Mechanic0007 Thank you. The pitch of a lead screw is simply the distance (spacing) between adjacent threads. Please see at google how to measure - usually the entire parameter of the thread is represented as: EXAMPLE M30x1.5 what state 30mm of diameter and 1.5 mm pitch.
@@SCOOTERREPAIR-kf2fn Thank you for the comment and help ! However, my scooter has different size of the fork's threaded holes. After dimensioning and fitting couple of bolts: There is M32x2 if anybody else would like to know. There is no puller with this size on the market. Does yours is custom made ?
U are the Best i have s5 thanks for all
I don't care what anyone says these scooters are a deal for $700. They are built like a tank, it's an engineering marvel.
Where did you get those ratchets for the wheels?
Para el s10s se quita igual??
thank you sir
Can you do rear suspension, also where to get the parts
Hallo, where can i get the special tool for the damper?
I have a s10 s the adjustable handlebar it keeps going down when I ride. Any suggestions? And I did tighten the. Stem Quick Release Clamp to so…
You figured that out yet I know what’s up with it it’s a tiny middle bolt on the front of it. If it comes completely loose your whole clamp and a plastic thing in the middle will fall out.
Hi there i have joyor s10s abd do u know where i can buy parts if somethibg went wrong with mine im from united states.
Hello. Please, is it possible to buy "the tool" somewhere? I will be changing the shock absorbers so im afraid i will need it.
THANKS, i have a joyor s10s and i dont know how remove the motor
czcams.com/video/dZiBNL87n9Y/video.html
I have a s10 s electric scooter I need tires do you know somewhere that I can get tires off routing tires because I have street tires on it now
czcams.com/video/wV0BxYZmt2M/video.html
you need a special wrench. #18mm. you can handmake one
Hello !
In advance thank you for the video.
Could you please let me know what is the size of the puller ? m30x?? I am looking for information concerning
thread pitch (m30x1.5 or m30x2 or m30x3?)
The diameter of the large screw is 30mm is correct, but which size does 1.5/2/3 refer to?
@@Mechanic0007 Thank you. The pitch of a lead screw is simply the distance (spacing) between adjacent threads. Please see at google how to measure - usually the entire parameter of the thread is represented as: EXAMPLE M30x1.5 what state 30mm of diameter and 1.5 mm pitch.
@@Mechanic0007 I think it's 1.5, because I measured the value between 1.5-1.8, which is less than 2.0
@@SCOOTERREPAIR-kf2fn Thank you for the comment and help ! However, my scooter has different size of the fork's threaded holes. After dimensioning and fitting couple of bolts: There is M32x2 if anybody else would like to know. There is no puller with this size on the market. Does yours is custom made ?
@@kamilsabat4611 The factory gave it to me, I don't know if it is a special size