Making a High Power Electric Scooter
Vložit
- čas přidán 25. 06. 2021
- Cotrollers 48v 18 amps, bought here - ali.ski/ev0jO_
BMSka was selected taking into account the battery output current and the maximum current of the controllers, and this is 35 amps 13s,
bought here - ali.ski/glu2i (now only 30a on sale)
I made the battery myself from 18650 with a current return of 5.2 amperes per cell. Bought here - ali.ski/BGmsW
The whole battery turned out to be 13s6p with a capacity of 48v 15.6mAh with a current output of about 35 amperes;
All components for the manufacture of batteries:
shrink sleeve - ali.ski/weere
ribbon - ali.ski/dmddn
gaskets for insulating contacts - ali.ski/fjxnu
plastic holders - ali.ski/ZS-nTL
xc60 connector - ali.ski/gJE4Q
Brake disc with brake caliper bought here - ali.ski/NGW7eq
If you are interested, here is a link to hydraulic brakes - ali.ski/Ly_0-
Brake levers for a cable with a sensor for recuperation here - ali.ski/cmJUH7
I bought the steering wheel here - ali.ski/Wy3cG
Takeaway bought this one - ali.ski/tL6Xg
Faro bought a simple one with a built-in horn - ali.ski/RIP9A
I bought a sandpaper for a deck from a skateboard here - ali.ski/5xMs04
Shock absorbers - ali.ski/rIV18
Here you can put air shock absorbers - ali.ski/i08lg
I decided to put the gas trigger with a voltmeter to track the battery charge - ali.ski/ZKNwyT
To monitor the speed and mileage, you can put this speedometer - ali.ski/fbj8q
/ lavilassanek
Сontact email - lavilassanek@gmail.com - Jak na to + styl
When machinists are putting out content like this, CZcams has peaked. The way this is filmed and edited is outstanding.
Молодец парнь....😎
Definitely good editing, but for me the first 8 minutes of the music was not exactly my taste.
Engineer I doubt there were plans that he followed for this project he designed it himself obviously calling him a machinist is an insult
Good talk
Buen trabajo 😮
I was here for the scooter but stayed for the outstanding editing and cinematography.
I too am here to kill time while eating cinnamon rolls while out standing on my porch
Definitely correct bro . i was here to c the scooter . i just paused my hands to dnt frwd the video . awesome editing
😎🔥
Try one wheel High Power scooter
Outstanding editing and cinematography 🥰🥰🥰
Made by a madman indeed. This is incredibly beautiful.
This is by far one of the best engineering videos I've ever watched on CZcams.
As a fellow tech youtuber I can really appreciate the effort you put into this video. Its absolutely incredible. From the editing, music, transitions down to the very content itself. Just Wow.
Its a lot he deserve it
@OBEY stroke what?
That is not an engineering video at all but a metal worker video.
An electric scooter designed / built by an engineer would be totally different. Engineering work, not the final realisation but the way the hours are spent, is not sexy on camera, viewer would not understand the skills. Whereas with craftmanship, like pro sport or musical instrument playing, even if viewers do not know how to do it, you can say if the guy is good and be amazed.
An engineer would have not used an old fork. An engineer would have make the calculus before the realisation, especially about suspension and size of some metal parts, and not on the go by the look. An engineer would have not put holes in the body after the painting. An engineer would have tried to use other lighter materials when not needed. And most of all, an engineer would have needed a metal worker to do the build properly and quickly ;-)
Caught me at high powered scooter, shocked me with the level of engineering and craftsmanship, so well edited 32 minutes well worth it.
Обычно, подобные видосы, я смотрю отрывками, чтобы сразу увидеть результат, но это посмотрел от начала и до конца без скипов. Отличная работа и монтаж офигенный! Красавчик.
WTF guys! Like and subscride RIGHT NOW!
Это парень с Беларуси кстати
Chào bạn. Chúc ngày mới an an lành hạnh phúc
это печальный симптом.
видео ряд и конченная музыка повреждают мозг
задумайся над психическим здоровьем.
@@sliamee5579 Серьезно? Не ожидал что в нашей стране такое возможно...
Вы провели огромный труд, над вашим проектом, монтажем и съёмкой. Таких людей как вы стоит ценить, и уважать. Весь труд который вы проделали, всё время которое вы потратили, надеюсь оно того стоило, и принесло вам удовольствие и радость.
EXACTLY the reason this vid got a like, a share and a subscribe from me. It was even a fine piece of entertainment.
ИМЕННО причина, по которой это видео получило от меня лайк, репост и подписку. Это было даже прекрасным развлечением.
IMENNO prichina, po kotoroy eto video poluchilo ot menya layk, repost i podpisku. Eto bylo dazhe prekrasnym razvlecheniyem.
ну да, он же каждый день на заводе не работает, надо ценить как он умеет снимать, сейчас же это больше ценится...
The video editing work in this vid is simply stunning, workmanship is another level too. Well done all.
Aluminum welding was insane, and lol at all the lathing and machine work, literally every piece you put together from the ground up. Great work!!!
Уважение такому парню у которого есть столько инструмента очень понравился пескоструйный ящик Ну и не только видно хороший уровень инструмента Ну а работа просто супер
Absolutely incredible editing! Really smooth and creative transitions
Hopefully videos like this get more young people involved in machining & metal fabrication. He makes it look easy! But keep in mind it takes a lot longer to make a homemade electric scooter than just 32 mins. In actuality, it probably took a couple weeks just to machine the parts. The editing is incredible! Great job! And how much for a custom scooter?
The eye of an artist, mind of an engineer and hands of a surgeon. Dope AF!!!
hehe, damn right !
Awesome Combine Video & Music Backgd...
he used machining tools and it still looked like shit
@@DrComingz 😂 cold blooded hater
@@DrComingz это лучше, чем ты можешь
Dude.. i'm a filmmaker and you got some serious talent with some of these shots you came up with! Great edit of course. You do a video like this once a week and you'll have a MONSTER channel and following
+1 came to see scooter build, stayed cuz of amazing machining and editing skills...
And I rarely watch thru 30min videos...
@@DaveChips samee
This isn’t his CZcams his main youtube is madman he has 750k subs haha
@@britishfireworks I couldn't find his channel.
@@irkedoff czcams.com/channels/vAa0DitrWxlEnKegau0ZeA.html
His diy scooter is so well put together that it seemed like he bought it from a store. It's professionally made
Офигеть, парень… Твоё кун-фу просто фантастика!
I don’t know what to be amazed of, video editing or the details and making of the bike. Really a good quality of build. Keep making more of these videos.
It’s the American 🇺🇸 Way !!!
It actually fkn sucks. Like does he not fkn talk?? Loud ass music and moves around so much cant see how to actually build the damn scooter. Smfh
Actually its made in Russia!
@Rob Floss hes not american lmao
Its not a bike
MATE... I run a E-scooter repair company in the UK and this has just blown my mind. Thanks for making something so interesting to watch.
Wheres your store? Can de-limit or upgrade a pure e-scooter?
@@Lucky96 bruh im here for the same reason hhahhaa
Everything done with class. Amazing workmanship. This guy is a perfectionist
Once he’s used to that one imagine what version 2 will be like. I’d love a work shop like that. Great work. I hated turning brass. I had 8 hours a day at a lathe. Great video.
Man I loved turning brass. One of my favourite materials to turn. Just needed to get some deflectors in there to direct the stream of fine chips away from your face
I'm just speechless with the limitless amount of talent in just one video. Seriously!!! I was watching it and thinking of ways to praise not only so many aspects of the manufacturing process, but the video editing, camera work and story telling are just mesmerizing!
Kudos to you, man. This has to be one of, if not, THE most inspiring and elaborated DIY video I've seen on CZcams so far!
Keep up the awesome work!
It actually fkn sucks. Like does he not fkn talk?? Loud ass music and moves around so much cant see how to actually build the damn scooter. Smfh
WTF guys! Like and subscride RIGHT NOW!
I feellike a silly wee boy now
I said "no way am I watching this whole 32 minute video" and here I am 33 minutes later commenting. Probably one of the best builds from the actual scooter to all the planning that goes into making this video what it is. Two completely different jobs well done.
Yeah i thought the same
Mechanic electric painting i would say 3 different jobs well done! Respect!
I've watched a lot of CZcams engineering projects over the years, but this one stands out. Not only was it really imaginative (Loved the bicycle crank swing arm idea), but the quality of the work was crazy. The formed sheet metal construction of the headstock support structure LOOKS like it must be a cast alloy item, and that hooped rear mudguard bracket was beautiful.
A lot of folks have the creativeness to think up the aesthetically harmonious designs for something like this, and a fair few have the engineering ability to take those designs and turn it into reality, but it's a rarity for creative designer and a competent engineer to both be one person.
Thumbs up for not holding the camera directly on it while welding! Finally I could watch a cool metalworking video without eye pain. Thanks
А что тут сказать, это высший пилотаж, машиностроение плюс инженерный проэкт и мастерство, красава!
WTF guys! Like and subscride RIGHT NOW!
Usually, in watching such videos, I always skip to the end, where I see finished project but here, I watched entire video as it is made very professionally both in transitions from partly done to fully done, like magic and cinematography, as well as evidence of how something gets done, if one enjoys and is fully absorbed by whatever he/she is doing. Well done, outstanding work and success in future projects!
Also may be one of the cleanest most well put together edits I've ever seen. Bravo bro..
very very cool, love the transitions in the editing and the engineering and design is pure class.
Это лучше что я видел. Бро, ты красавчик, реально мастер на все руки, от метала до монтажа видео. 👏👏👏
соглашаюсь слово в слово!респект тебе дружище!
Never had the interest in machine building, but this one is really amazing. Metal, Craftmanship, pure skills plus video editing beautifully perfected. Cant easily find rare talent now a days. Love this video.
I request all of my brothers and sisters that they should study the Holy quran and got original teaching of God and achieve success in long run
It actually fkn sucks. Like does he not fkn talk?? Loud ass music and moves around so much cant see how to actually build the damn scooter. Smfh
Great job wish to get one
It's really hard work that makes it look easy and simple. The engineering, editing, cinematography - amazing
This is the kind of videos youtube should recommend me to watch, very high level build, montage, filming, work, project🤯...
Чувак это просто шедевр, как многие пишут качество съёмки на высоте но и сам самокат получился огненный! Удачи и развития!
У него на основном (русскоязычном) канале больше 700 тысяч ;)
I request all of my brothers and sisters that they should study the Holy quran and got original teaching of God and achieve success in long run
@@RussianFans-vn6cj Good luck
can't believe how many hours went into this, between designing the thing, filming and editing! SO MUCH WORK!
not a work of single person. a pro team is behind all the work
That song in your intro is dope I found it one day on accident, and hearing it was surprising!! Thanks for sharing!
Incredible works! LOve it! adorable scenes with great tracks and editing!! You got super great massively build!
Cut scenes, transitions , songs, the amount of precise engineering is another level😯
AMAZING 🫡
Videography, Editing, audio, Craftsmanship, Dedication, etc.... It's amazing man... I don't know what else to say. Everything is insane!!!
Просто воу. Ты делаешь реальные вещи, дух захватывает!! Продвижения и успеха твоему каналу, твои умения этого заслуживают)
Solo poedo decir ,Que este chabal save trabajar de Electromecanico,Soldor etc ,Lo que save es de Apreciarlo
Очень рукастый этот парень 👍
one of the best youtube video montages I've ever seen. well done. nice to watch. and the project itself is noteworthy.
Wow this guy's just good at everything, building, creating, engineering, editing and everything, I'm a little bit jealous of all of your skills.
here is a case between video editing and doing something(a scooter). I cannot decide myself at what should I look first. the transitions from camera plus video editing are wooow but also the skills needed to build a scooter are wooow.
I think is the best video that I have seen on CZcams until now( of course for me).
Respect man!
The time in on this project from design, machining, welding, editing, just amazing
This guy is amazing. Mind blowing workshop skills and video editing.👏👏👏
I don’t know what is more amazing your fabrication skills or the video editing
I rarely comment on videos but the absolute display of talent is monstrous, keep it going bro, I’m sure you’ll do great on CZcams
Chào bạn. Chúc ngày mới an an lành hạnh phúc
Mad respect bro, from one machinist to another. Very awesome craftsmanship.
Can't comprehend how much planning and work this video takes.
One of the best DIY Scooter !!! Amazing build.
When I saw the title I never imagined ' literally ' making the thing from scratch.... wow,
Mad skills at machining && editing.
Top engineer! Great video. Enjoyed every second of that. The scooter came out really nice at the end
Never thought I´d find a machinisht that is super good at editing, got some good taste in the music and makes dope as builds today. But here we are. CZcams is really wonderful
My heart almost stopped when i saw how clean that was halfway through! You have some INCREDIBLE SKILLS! in both editing and everything else! This is AWESOME! keep it up! You have GOT to be a paied profesional!!! I am definantly subbing and mabey one daY i will be as good as that!
But... when i watched the end... there are no words to describe how amazed i was at the professionalism in that. That looks like a $5k production scooter!!!!
Apart from some of the musics which I noted you picked different genres maybe to please everyone, EVERYTHING else is just WOWWWW!
The camera angles, the editing, your amazing outstanding skills in machinery, TIG welding, sheet metal, even your style are so so sooooo good that left me 😲🤯
Going to subscribe just based on this video alone! Congrats for such an amazing work on all fronts!
Смотрел все видео на одном дыхании. Очень затягивает. Люблю всякие самоделки . Видно что у человека руки растут откуда нужно ,да и голова на плечах не просто так прикреплена. До момента пока не выехал на самокате из гаража думал мастер или из штатов или из Европы. Оказывается наш Кулибин 👍. Молодец ,респект и уважуха! С меня лайк и подписка ! Жду новые интересные видео.
А я сразу увидел что парень русский. У наших на лице написано. Долго пытался спалить, выдал баллон с надписью "углекислый газ" 😄
This video was probably one of the best videos I have ever seen, not only was his craftsmanship outstanding but the video editing was on another level. My man you got talent real talk. This was so impressive 👏 gotta give you all your flowers bro super cool. ✌️
you make it look so easy! way to go! this is how a content should be.
Insane craftsman’s ship and talent.
+ Cam, edits, music - Amazing.
FOCUS. PATIENCE. DETERMINATION. It's just AMAZING! This is what a man can do when he loves what he is doing. You earned a LIKE & A SUBSCRIBER! More Blessings to you bro!
Hard to decide which skill is better, engineering or editing. Superb! Loved it.
i'm not gonna talk about the mecanical engineering, i'm not gonna talk about the editing, there is something unique about this man, he is editing he's videos in real time in his head when he's working on the scooter
I have never written comments on a youtube video, but that was by far the most talented build i've seen. If you guys are not making sick money I would be shocked
Best video of 2021 for me! Really awesome job not just making the scooter. The edit was just stunning. Much love from Barcelona, wish one day I get a workshop like you have!
I request all of my brothers and sisters that they should study the Holy quran and got original teaching of God and achieve success in long run
Отличная работа! Самокат получился как заводской, надеюсь я увижу эти модели на маркетплейсе!
¡ Excelente presentación visual ! Es un verdadero mago de la transformación del metal, y una nueva forma de no aburrir viendo todo el verdadero proceso de transformación, sujeriria que toda información vía internet se realice así. ¡ Felicitaciones !
The sheer precision you showed in this video is mind boggling. Special talent you are without a doubt.
Have you started watching our vlogs?
If not you are missing out.
Here is the link.
czcams.com/video/aV7qBwVJQWw/video.html
Do subscribe, share, like and drop your comments.
It would be great to hear your feedback on the channel (if any) and, while you're at it, don't hesitate to show some love!
Thanks in advance.
Simple things
As many have mentioned you have some serious skills on editing and scripting. I love the transitions throwing the parts as some walk and some spit into fully finished. Awesome build and video.
I can't stop watching your wonderful work again and again. I dreamed of this when I was young. Now that I'm old, I hope I can at least try using something like that for a while. because you have done your wonderful work for a long time. maybe you can give it to me as a gift for this christmas that will help me in my daily work. watching from philippines is the only one who admires your works, may you be blessed with all the blessings, thank you. MADMAN
Просто лучший!!! Ты разбил все представления об этапах производства и послал наксуй всю бюрократию!!! Обнял дружище!!!
Dude the editing and video quality is amazing. How this doesn’t haven’t a mil views is beyond me. Awesome.
Nearly has ;)
in one word, a great video, good job, master good nice :)
Не все любят реп , от него уши болят.
2.2 M. now...
7 Mill now 🤣
Next level editing of these type of machine-building videos🔥
I know it takes a lot of time and a lot of hard work but It pays off with the massive 10 million views.
Great work man.
Awstanding....
It actually fkn sucks. Like does he not fkn talk?? Loud ass music and moves around so much cant see how to actually build the damn scooter. Smfh
@@lulslime1066 lmao this guy hating and doesn't even know how hard and time consuming each shot takes if you dont appreciate it just leave no one cares about your opinion and he's Russian
@@levicagampang7139 I don't think he actually hates it 100%
He's just talking about how he can't learn properly from the video on how to make the scooter cuz it's moving too fast.
@@victoryawesomenessgaming5806 yeah probably not cause he replied in a lot of comments and its the same thing saying he hates it
some of the best transitions i've seen. WELL DONE!
Fantastic video! Love to see a master at work!
I loved the visual affects that you have used, The one scene where you are welding going invisible when the sparks stops just made me feel wooooooow ❤❤
I don't know which one is more awesome. The mechanics process or the editing techniques. Anyway, both together made this masterpiece. Congrats 👏 👏 👏
No importo lo largo del video, fue espectacular verlo y al final increíble
Hats off masterful craftsmanship and cool editing too. It was a blast to watch.
Excellent video shooting techniques, great mechanical knowledge and skills. I watched it from start to finish without blinking my eyes. congratulations
What in the world. Wow. Simply inspiring execution! I hope you had help filming, otherwise I’m even more envious of how you pulled this all off. Great work!
I'm positive he does all the filming alone, especially if you watch his older videos. This kids talented in so many ways. Very smart.
Ok
czcams.com/channels/GfJm2c8x0cqRjGnFPDQYbQ.html
WTF guys! Like and subscride RIGHT NOW!
The Build and editing is above top level. A++😁
The production of this is insane😮 great work love the video
One of the best video showcasing both skill and video editing, ever found on CZcams!!!
Especially the cinematography where you weld and the transitions is just crazy as if it’s been shot and edited using an Alien Technology. Seriously Out of the World !!!
It is to be understood, the intense amount of hardship, planning and preparing which has been done for creating a video like this !!!
Kudos for this great content !!
WTF guys! Like and subscride RIGHT NOW!
Ютуб подсунул ваше видео, и как я знатно офигел когда увидел свой дом в конце. Миллионы часов контента, а Ютуб подсунул именно его))) а скутер классный!
🤣🤣🤣
Почему ночью снимал на видео?
Making your prototype scooter has great engineering, I hope you become a factory because you make the best products
Good luck and keep your job
Amazing workmanship on the build and video production…
Hey there, I am a mechanical Engineer and I must say - hats off to you !! GREAT work. Above all the great work, the video editing is just INSANE man... Its so catchy to watch, so entertaining, all the transmissions, HOLY MOTHER thats HUUUUGE piece of work !! You got my subscription and I wish you to keep the great work and many ideas in your head for the new projects !!
From working skills to editing, everything in this video is perfect. It cannot get better than this. I watched it till the end, just because it was so good...Otherwise, I can't even think of making such things... 😀
Me too I watched
I request all of my brothers and sisters that they should study the Holy quran and got original teaching of God and achieve success in long run
Chào bạn. Chúc ngày mới an an lành hạnh phúc
Ya know, personally i am a really good machinist. I enjoyed watching it all be done in time lapse, i imagine if i made everything from scratch the way you did. It would probably be something id just hand down to my son. Priceless. ;)
You are genius bro....hats off...when there's our own workshop then there is possibility....nice job.
Wow, great build and awesome detail… thanks for fitting it all into one video.
Imagine having the skill, knowledge, ability and tools complete a project like this. Amazing. Enjoyed every second. Would be interested to know the cost of the build
Going by the cost a shop would charge to do all the fab work $1500+
100 000 рублей
Makes me feel inadequate
Awesome dude! Nice work!
Aca es cuando te das cuenta que las personas nacen con un talento natural para hacer ciertas cosas y lo desarrollan, creatividad al 100%
Holy the welding the machining the craftsmanship my god this video is perfect in all aspects , no doubt you’re going places on CZcams absolute legend
Some of the best editing I've seen, amazing work guys. Oh yeah and the scooter was epic 🔥🔥🔥
Mad skills for sure 👍
Just 2 things I would do differently.
1. You should left the bare aluminum as it is so people could tell it is custom all hand made. Maybe a clear coat to expose aluminum color..
After you painted it now it looks mass manufactured once.
2. Base plate where you standing could be done little bit more aesthetically not all square shape. I know there is battery under but still you could it more eye pleasant way…
Fantastyczna robota, gratuluję wiedzy i warsztatu, pozdrawiam z Polski.
Looks like you have all the time in the world! The set of skills (including video, sound & editing etc.), machinery and tools is just incredible!
PS: you forgot a kickstand))
The best edit I’ve seen so far on a build. Camera shots and angles are insane! Jack of all trades!
I request all of my brothers and sisters that they should study the Holy quran and got original teaching of God and achieve success in long run
Absolute unit right here!
@@RussianFans-vn6cj This is no religion channel, so you can spare us your shit und shut up. 🤫
@@RussianFans-vn6cj the original teachings of God are in the bible. Not your how to warlord handbook
@@afrimaras2940 so funny ❤️
Dude maxed out his skill tree.
The production quality is immense!