This video brings back old memories. Driving Daytona in a C3 Corvette for the 1975 IMSA Paul Revere 250. Unfortunately neither I or John finished due to mechanical problems. But it was fun while it lasted. ThoseC2/C3 cars were a blast to drive.
What a monster--the massive rear tires spin freely in lower gears. Driving on ice and snow was always good practice for driving a high powered Corvette.
Let us remind ourselves just what the Greenwood 'vettes showed the world. When the hammer came down in top gear on the back straight it blew the doors off all the exotics. Think 'Ole Yeller, on steroids..
That exact cam ran great in my 68 Camaro 396 M20 4 speed and 12 bolt with 513 Eaton pro gears. This was my every day work car at 19-20 years old. I also ran that cam in my 69 Impala Custom 427. Kinda lazy on the bottom in that car but pulled hard on the top end. Tuscaloosa 79-83.
I nearly shit my pants when he slid the Big block thru the bus stop what a ride ....My hat is off to the driver with Aggitt's large enough to even attempt such a thing ...
@@JuanCostamagna While full slides were never faster, a little bit of opposite lock on corner exit in exchange for getting on the power sooner WAS actually faster in older cars. That's why you would see racecar drivers (who's goal is obviously to go as fast as possible), working the wheel so much in everything from the Lotus 49 to older touring cars etc. Plus, these cars were not easy to drive fast. If you aren't close enough to the limit to kick the back end out occasionally, you are driving well below the limit, and chances are, are going slower than the competition who are driving on a razor's edge
@@carscoffeeandcannabis-634 Hit the nail on the head. While I have no experience driving this car in real life, this is how it is in the sims. If you're not driving on the edge of breaking loose, you're driving slow! This car is all about straight line speed, the earlier you get on the power, the faster your lap times get.
...And suddenly I want to go play Forza. My gosh, the sound, the speed, and recognizing the track they’re on. Driving with another racer alongside doubles the awesomeness.
Restoring, repairing, tuning and driving so many BB mid-years, you eventually get used to the left/right/straight dynamic and adjust to having to crank in so much steering until it grabs. So baddass.
those motors were big inch aluminum can am engines. 540 in all aluminum can am monsters. monster torque and big top end high rev horsepower..barely able to handle it.
This video brings back old memories. Driving Daytona in a C3 Corvette for the 1975 IMSA Paul Revere 250. Unfortunately neither I or John finished due to mechanical problems. But it was fun while it lasted. ThoseC2/C3 cars were a blast to drive.
Wow that's awesome! What was it like?
I was there that night, also at the '75 Sebring and a few 24 Hr Daytonas late 70's. Always enjoyed following the Corvettes,still do.
FREAKING FANTASTIC
What a monster--the massive rear tires spin freely in lower gears. Driving on ice and snow was always good practice for driving a high powered Corvette.
What an excellent driver, managing BBC power constantly and using it when needed.
You can tell he wanted that other guy for the brake-check early on. He got him too.
The L88 Corvette, The Greatest Car Ever Built...........PERIOD!!!!!!!!
Omg that epic overtake from the outside! Loving it!
Amazing sound.
Feeakin" Fat Yeah?
I didn't know about the Greenwood Vettes until I seen a crazy Hotwheel with my name on on it, now I'm educated on the history.
Wow. That thing looks like quite a handful to drive.
that car looks like a handful, loose on corner exit is to be expected, but it’s getting big time sideways under braking too
Love the C3s and the Greenwood Vettes. Always a handful but fast ! Nice drive Jules.
Damn, those slides, love it.
Loving the heel toe downshifting
Nice eye Pati
Let us remind ourselves just what the Greenwood 'vettes showed the world. When the hammer came down in top gear on the back straight it blew the doors off all the exotics. Think 'Ole Yeller, on steroids..
A 76 widebody Greenwood Vette consistently hit 220 mph down the Mulsanne straight at LeMans and was the fastest car on the straight.
Wish we knew what kind of speeds hes hitting in that Greenwood prepped C3 Corvette on the straightaways & in the curves! 👀🏁
THATS how you drive a vintage C3 Corvette race car! Hes super chill about it, huh?!
Gen.I grind #3925535 RPO L88
Adv. Duration; Int./Exh. 342*/333*
Lobe lift; Int./Exh. .329"/.341"
Valve clearance, hot (Lash) Int./Exh. .022"/.026"
Int. 264* @ .050"
Exh. 270* @ .050"
LSA 112*
Lobe Centerline/s; Int.108* Exh.116*
Extremely effective and well engineered valve timing events for the intended application.
That exact cam ran great in my 68 Camaro 396 M20 4 speed and 12 bolt with 513 Eaton pro gears. This was my every day work car at 19-20 years old. I also ran that cam in my 69 Impala Custom 427. Kinda lazy on the bottom in that car but pulled hard on the top end. Tuscaloosa 79-83.
What a sound at high RPM's. Heel toe manouver needed for downshifts!!!!
This thing is a f*ing monster. Love how hard he pulls on that radical in the 2nd lap. Loose sloppy back end with gobs of torque.
Have to say this car in Raceroom drives **exactly** like what I’m seeing here. Which is kinda cool.
I nearly shit my pants when he slid the Big block thru the bus stop what a ride ....My hat is off to the driver with Aggitt's large enough to even attempt such a thing ...
What a weapon
Excellent, thanks. L/S
A time when sideways was faster ! Big power and no downforce
sideways never was faster, is just a waste of time...
No it is not, but we should be able to enjoy how racecars were made back in the day
I enjoy this type of cars but I will never say "old times was best times" or "sideways was faster" as a total truth like you do...
@@JuanCostamagna While full slides were never faster, a little bit of opposite lock on corner exit in exchange for getting on the power sooner WAS actually faster in older cars. That's why you would see racecar drivers (who's goal is obviously to go as fast as possible), working the wheel so much in everything from the Lotus 49 to older touring cars etc.
Plus, these cars were not easy to drive fast. If you aren't close enough to the limit to kick the back end out occasionally, you are driving well below the limit, and chances are, are going slower than the competition who are driving on a razor's edge
@@carscoffeeandcannabis-634 Hit the nail on the head. While I have no experience driving this car in real life, this is how it is in the sims. If you're not driving on the edge of breaking loose, you're driving slow! This car is all about straight line speed, the earlier you get on the power, the faster your lap times get.
I have some laps on that track in a SCCA E/P car, seemed pretty tame compared to this evil witch!
Magic.
Back in the day, NO bus stop on the back straight
The Greenwoods really got me into vettes!
Bad to the bones💪💪💪🔥🔥propper
Some very fancy footwork!
Wow. What a ride!
...And suddenly I want to go play Forza. My gosh, the sound, the speed, and recognizing the track they’re on. Driving with another racer alongside doubles the awesomeness.
Well they just added the Greenwood Vette' as DLC
That's a tail happy monster
Restoring, repairing, tuning and driving so many BB mid-years, you eventually get used to the left/right/straight dynamic and adjust to having to crank in so much steering until it grabs. So baddass.
the car, being set up close to neutral, did take the superspeedway corners pretty darn well.
i doubt this car had much stagger in the rear.
Love it!!
Awesome
Is it a prerequisite of a big block racer that it is so gorgeous it lures you in but then pretends it wants to kill you? But what a way to go.
Love the sound of a pissed off 427 BBC. Driver was fun to watch, I would have had to change my undies.
Looks like it was cold, those tires started gripping after the first two laps. Must have been like a top fuel on ice before.
soooooo loooooose my god
those motors were big inch aluminum can am engines. 540 in all aluminum can am monsters. monster torque and big top end high rev horsepower..barely able to handle it.
427 L88 is a cast iron block, aluminum heads
427 Zl1 is all aluminum. You're right about the 540
That's probably what it really has, and a lot more than .540/.560 lift. Probably closer to .700-.740 lift.
What kind of gearbox uses?
It's really disconcerting seeing how off-center the steering wheel is.
Fuck that's loose . Wish I could have a drive
epic boating)
That looks like one unforgiving car.
9 liters of 'murican power
Are you sure? If it's really an L88 that's only 7 liters at 427. But then only the team members really knew what was in it.
Those are real races with real vehicles with real engines, that is if the pilot is racing if he is a pilot.
hahahahahahaha WTF grampa
Not impressed with that driver what so ever.