How to make deep dish wheels for diecast cars - DIY Tutorial
Vložit
- čas přidán 5. 12. 2020
- Welcome to my channel. Please like this video and subscribe to support my future work.
This video is DIY Tutorial for making deep dish wheels for diecast cars.
Video by Slobodan Radelić
Camera used: Xiaomi Redmi Note 9 Pro smartphone
Music:
--------
Track: New Life by JayJen & ASHUTOSH
Free Download / Stream: fanlink.to/NewLifeJayJen
--------
Track: Stardust - JayJen [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Stardust - JayJen | Fr...
Free Download / Stream: alplus.io/stardust
--------
Song: Chime - Lifelong [NCS Release]
Music provided by NoCopyrightSounds
Free Download/Stream: ncs.io/Lifelong
Watch: • Chime - Lifelong | DnB... - Auta a dopravní prostředky
Easily the best guide to scratch building wheels for hot wheels cars I've seen on CZcams. Thanks.
Glad you liked it!
The best custom wheels tutorial I've seen so far. Good work.
Glad you liked it!
Dam!! Simple yet effective! Love the video. 💯😎
This is the best custom hot wheels tutorial in the world
Thanks.
Great ,thanks for sharing!!!
Wow! Thanks for sharing
voadora no like parabéns e obrigado por compartilhar seus conhecimentos
Nice job. Thank you for this 🙏
Thanks for sharing
One heck of a tutorial, bravo! 👏😁👌👍
Thanks! 😃
Beautiful technique, you are great guy
This is brilliant. Thank You so much for sharing this 🙂
Glad you enjoyed it!
Gracias, esta muy chido el resultado,
Loving the music as well as the how too guide
good video. thanks
amazing
That's nice wheels. .
Nice...
yes yes YES ! Great tutorial
Thank you!
Perfect. Thanks for share
Thanks for watching!
Genius.
seriously, this is the best custom wheels video i've ever seen man. great job. love this
Thank you. I'm glad you like how I did it.
Good idea👍
для меня это не новость) сам когда-то на ВАЗ 2104 Cyberpunk 2077 светящиеся широкие с вылетом диски делал
Good tutorial on making deep dish wheels. All subbed up (#431). 🍁
I subbed too..
Underrated channel you deserve 1 mil subs
Thank you. I hope things will be better in future. Subs always come slower in the beginning. Channel exists 7 years but I started upload this type of content only 7 months ago.
WOW really cool tutorial, I may try this on an upcoming project. Just subscribed 👍💪🏁
Thanks. 🙂
Those wheels are massive
They are 13 mm in diameter. For some cars they are big, for some are good. I wanted to show procedure of making wheels, for smaller wheels you can use smaller tube and vice versa.
Great idea wow!
Thank you!
Glad you like it!
Im a new sub. Great tutorial video I really like it. I'm going to attempt to do some deep dish wheels of my own now.
Thanks and welcome
Really good!!
Great job
Wow. Awesone. This is really nice. I like it.
Glad you like it!
Wooww... very inspiring... 👍
Thanks
Nice job and great idea..!
Thanks!
nice !!! thank you for sharing
Thanks for visiting
Buena idea, gracias por compartir. Me suscribo a tu canal.
Gracias.
👍🏻👍🏻👍🏻
Good video 👍👍👍
Thank you 👍
Great job 👍
Thanks for the visit
Way cool stuff, will be doing this asap!
Great method but don't the ODs end up too large? Scale wheels/tires should be ~ 11mm dia max, maybe 12mm for 1/56 Scale ?
EXTRA!!!
what size is the aluminum tube?
Inner diameter is 10.85 milimeters and outer diameter is 11.2 mm.
Please link everything u use next time but overall great tutorial 👍
I'm not sure what link you need? I mentioned every material that I used but I didn't buy any of that online. For this video I found all in my local stores: fishing rod stand, heat shrink tubes... Those are common tools and materials and you can find it in most of hardware stores. Also, it's not so practical to put links in youtube video, because links for certain things in online shops can change after short time and I would have to check links in my videos every day. I always write names of tools and materials and that is most important. When you know names you can easy find something.
verry nice!!! where we found the aluminum tube ?
You can buy it on Ebay or Aliexpress. It cost around 2-3 USD. Search for "aluminum fishing rod holder"
@@WhattoRepair thanks!! 1: 64 scale?
as uno en español para la proxima
What brand is the paint pencil you're using?
It's Molotow Liquid Chrome paint marker. You can see here, I made a review czcams.com/video/kpbiXjtY2pI/video.html
I bought marker on Ebay.
I know I'm a little late to the party but anyway...where can i get the materials used for the tires?..loved the video btw really helpful info.!
You are not late, people will always make wheels and there is always somebody who is a beginner. I used heat shrink for tires. Heat shrink is tube that shrinks when exposed to heat. It starts to shrink on temperature around 90°C or 194°F. It's mostly used to protect cables and wires. You put piece of heat shrink tube over the damaged part of the cable, or over the cable without insulation, then expose heat shrink tube to heat source, heat gun or simple lighter. After that heat shrink tube will form pretty strong insulation. So try to search heat shrink tubes in some hardware store, or store with electric materials, electric instalations for homes, electronic stores etc. I don't know where you live, you can probably find it online, bit its very cheap, cheaper than shipping, so I think its better to buy it in some local store.
@@WhattoRepair thanks friend
How did you cut that excessive heat shrink tube?
I'm showing how I cut excessive material here at 8:43 I was using scalpel. Maybe you didn't pay attention.
Yeah thanks alot❤
Can we use pen grip for tires??
Yes, you can use rubber pen grip if size is correct and if you like how it looks. I have a plan to make another video about making custom off road wheels with rubber pen grip.
Hello I know I’m late but where is a place I could buy these materials recently I have gotten into Modding Hot Wheels so if you could tell that would be great. Besides that great video and channel and you’ve earned a new Sub
Sorry for my late answer. When you start to customise diecast cars or start any modeling hobby, you need to look objects around you with "different eyes". You will find materials everywhere around you. There is no place where you can buy everything you need. I find stuff in various type of stores, online, on flea markets, around my house, in garden or park... Those aluminium tubes are fishing rod stands, I found them in local chinese store, but you can buy them on ebay, amazon or aliexpress or you can search something similar. Heat-shrink tubes are also from local store with electronic equipment, they are used for electric wire insulating. Scotch brite - from local paint store. Tell me what else you want to know. It was hardest to find aluminium tubes that match wheel radius. In fact, I was walking beside them in store almost every day, but I didn't noticed them until one day.
@@WhattoRepair thank you so much I also want to know the step by step because I watch tutorials but the never really explain it
Really terrific video sir, very helpful and with enough info that pretry much anyone can follow and repeat. Thank you very much for this and explaining the materials you used.
I have been wanting to do this myself, but have not been able to find the right size of aluminum tubing as of yet. I had not thought of using a fishing rod holder, I am sure if I look closer at the camping section of my local stores I should be able to find something similar to use. Very cool! 👍👍
Thanks again for sharing this great video. I will check out your other videos and subscribe to your channel. Great stuff, thanks for sharing, and keep on keeping on!!
Thank you very much.
Em.
Là.viêt.nam
🎁🎄🎅🤣🏎
MVN GVH 3 2021 2022
🙏20TT
💙💚💙💚💙
🇿🇦💰🚚
Too big wheels
That depends for which model you are using wheels. This is only principe how to make wheels. If you want to make it smaller, use smaller pipe and smaller wheels.
@@WhattoRepair oh, ok
There too big for regular cars, its not worth all the other work you would have to do to make them fit, you Cant lower a car, would have to grind wheel well back just like he had to do to the truck. Okay but not worth the hassle.
My friend, this is hobby, people are customising cars because they enjoy doing this. Nobody is looking is some work worth doing it, people are doing this because they love making something.
Wheels are not so big, they are medium size, there are bigger stock wheels. Even if they are too big for some cars, this is only example how to do this. If you want smaller wheels, then use smaller wheels and smaller tube. If you want bigger wheels use bigger materials. It depends what you want to do. Nothing in this video is grinded on trucks, but there isn't anything bad if you grind or cut something to fit your needs. And you can lower a car, you can even make it higher, make suspension or pretty much everything you can imagine, depends on your inspiration. And depends are you looking this as a hobby or some profitable job so you must calculate is something worth to spend time on.