Handmade Gold and Diamond Wedding Bands from Scratch
Vložit
- čas přidán 13. 03. 2020
- In this video will be taking some old 22 kt and 14 kt gold wedding rings and turn them into some new wedding rings with flush set diamonds.
How to Flush Set Stones into a Ring - • How to flush set stone...
Here are some links to the tools I used in this video:
H.15 Hammer Handpiece - bit.ly/h15hammer
Rolling Mill: bit.ly/pepetools130
Steel Mandrel - Gold Standard - bit.ly/GoldRingMandrel
Foredom k.2230 Flex Shaft - bit.ly/K2230
And here is my Amazon list - amzn.to/2w6K2OI
If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that and I'm updating all the time so bookmark it to stay up to date:
GomeowCreations.com/tools-and...
GomeowCreations.com/partners-...
If you buy any of the tools or materials from my list I will make a small commission at no extra charge to you and it helps support the channel
Music:
Break The Silence
Richard Caddock, WRLD, Nitro Fun, Slips & Slurs, Subtact
• [Future Bass] - Richar...
Without Your Love
Conro
• Conro - Without Your L...
I'm Here
Puppet & Foria
• [Indie Dance] - Puppet...
Some Kind Of Magic (feat. MYZICA)
LVTHER
• [Indie Dance] - LVTHER...
To Be Alive (feat. Aaron Richards)
Puppet
• Puppet - To Be Alive (...
----------------------------------------------------------------------------------------------------------
If you would like to directly support the channel you can do so in a few different ways.
1. Like, comment and share my videos
2. You can make a one time donation via Paypal of any amount www.paypal.me/gomeowcreations
3. You can sign up a monthly donation via my patreon for as little as $1 per month / gomeowcreations
4. Just watching my videos helps out too and I'm happy to see that I have been able to help some may people get into jewelry making.
#ringmaking #rollingmill #pepetools #jewellerymaking #jewelrymaking #goldmaking #silversmithing #diy #wedding #customweddingring - Jak na to + styl
How to Flush Set Stones into a Ring - czcams.com/video/6O6KA7ncPUQ/video.html
Here are some links to the tools I used in this video:
Use code MEOW on any order over $100 from Pepetools and save $30
H.15 Hammer Handpiece - bit.ly/h15hammer
Rolling Mill: bit.ly/pepetools130
Steel Mandrel - Gold Standard - bit.ly/GoldRingMandrel
Foredom k.2230 Flex Shaft - bit.ly/K2230
And here is my Amazon list - amzn.to/2w6K2OI
The first 500 people to use this link will get 2 free months of Skillshare Premium Membership: bit.ly/SkillShareGomeowCreations
If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that that I'm updating all the time so bookmark it to stay up to date GomeowCreations.com/tools-and-materials and GomeowCreations.com/partners-discount-codes
*If you buy any of the tools or materials from my list I will make a small commission at no extra charge to you and it helps support the channel*
When sanding on a flat surface use a figure 8 pattern while rotating the piece. This will result in a flatter piece. In Aerospace we used this method for hand lapping face seals that needed to be flat enough to not allow liquid to pass through while running in a pump. Hope this helps, I enjoy watching your videos
Incredible
Thanks a lot for showing how these things are done !!
Thank you again! We love them and love wearing them now...
Very nice job! Beautiful rings!
I love watching you create!! Thank you for explaining everything in such detail!!
Well thank you for watching 😁👍
@@GomeowCreations always!!! I have got to invest in that hammer handpiece. I was blessed with the Lion Punch Forge engraving adapter and its cool that it uses the hammer handpiece so it will make it much more useful especially for adding textures 😁 Thanks for the discount code!!! 🙏
“Well our gold nugget” lol 5:30
I like comission project videos like this one👍. Very well done and hope that customers are happy too💍💍.
Keep up good work!
Well thank you and it was interesting to work with gold seeing that I mostly work in silver
The customers are very happy!
Very cool. This is the first time I've watched your videos, but I have a feeling it won't be the last!
Well thank you very much 😊 I hope you like my other videos too 😁👍 and welcome to my channel
Nicely done Randy 👍
😁
Neat box. Are you planning to do videos on 3D printing (jewellery or anything)? I don’t have one but love watching what others can do.
I do have some ideas for something with the 3d printer 😁
Very excellent video I am learning loads. I’ve joined the Skillshare annual plan on your recommendation, thank you, so looking forward to that. Could do with a few more hours in the day though. Can you put a link as to where you source your salt & pepper diamond please. Thank you Kathy K.
www.etsy.com/listing/686215715/101-ct-17-mm-to-18-mm-natural-loose-salt?ref=yr_purchases
if you get some tell them I sent you 😁👍
Is that a 00 file? It has a fine cross hatch on it
What is the tool you used around 10:55 to flush file the ends of the piece?
Classical modern band
Nice work, welldone
Any idea to avoid copper jewellery greenish on finger ????
Thanks and I replied to your last comment with the answer to your question. 😁
@@GomeowCreations thank you
appreciated
About the double comments well you know more comments more reply opportunity
super helpful :D - I'm about to embark on a flush-set ring into gold, and I'm hoping that 18k Y will be as close to sterling as possible in terms of softness?
btw really awesome bench pin or wood working surface!
18k Y should be softer than the 18k W that I was dealing with.
do you solder gold the same way as you would silver
Hello which drill do you use?
That hair cut was practically yelling at the camera 🤣
Yeah I know it was a little crazy of a hair cut.
I need to see the after u solder what to so part with silver rings. I'm like super new to this
If you are new to jewelry making this might not be the best video to start with. Here is a link to a video showing how to make and solder a very basic ring you can build from the skill you get from this video czcams.com/video/zRKdWpiexbY/video.html
Thanks man I really appreciate it. I been looking at all your other videos
Hi Randy! Question for you. I'm in the process of making a simple gold band, but the little nugget I get after pouring the gold into my ingot mold seems to be too thick for my rolling mill (Lion Gold Smith). When I go to hammer it down a touch so that it can better pass through (I do this for silver projects all the time!), the little gold bar cracks on the edges and eventually splits. Do you have any suggestions for this? I've melted & repoured three or four times now! Thank you!
Get or make a thinner ingot mold. I took mine to a machine shop and had them cut it down and it works with my mill that doesn't open as much.
@@GomeowCreations thanks so much! That’s clever.
Where do you go to order gold?
Hi Randy. I always find all of your video's fascinating. I do have a couple of question. I plan on doing some lost wax casting and i understand that normally the mold is spun in a centrifugal device for proper casting. I noticed you did not have to do this for this casting. Is that because the metal retains the heat and the investment casting allows the metal to cool much faster and not flow as well? Also in my background as an AC technician we would use silver solder (with flux) to join dissimilar metals like brass, copper and steel together with much higher strength that plumbing solder. What keeps the molten gold or silver from sticking to the inside of the steel mold? My guess is the metal gets hot, but not hot enough to combine with the molten silver or gold? Take care.
So then making simple shapes you can just pour the metal into something like a ingot mold. It is a steel mold but I also use an oil on the inside of it so the metal will not get stuck to the steel. Also you don't have to spin something to cast stuff. I did a tufa casting video that you just pour your meeting into the carved out stone. I'm also working on a video right now about sand casting at is done in a similar way.
You can also do lost wax casting with a vacuum system to get some really detailed stuff done.
czcams.com/video/EMqjmWs2jUo/video.html
@@GomeowCreations Thanks Randy for your prompt and detailed reply. Luckily for me as an AC tech I actually have a vacuum pump . Take care.
For someone looking to start, where should I buy tools and materials? I’ve been looking for white gold wire, but can’t seem to find anything.
Riogrande.com
As you can hear, I got a hair cut. Bwaaaaaaahahahahahaa! Had to stop the video for a sec. Bwaaaahaha
You're the first person to say something about my little joke haha 😂
what was the thickness of both wires and the size diamonds you used as well as burr size? Sorry if you said this in the video and missed it. Thanks
I honestly don't remember but it was some custom sizing and it was not a square, it was more of a rectangle. 😁👍
@@GomeowCreations thanks!
So, how do you get the gold off of the sandpaper? Or do you turn in the sandpaper w/ the gold? Anyway, what a lucky couple! The rings turned out beautiful. Also, it must have been fun for them to watch the process of their wedding bands being made. Not many people get to see that. I would think it makes them appreciate their bands and what they represent even more.
I just turn in the paper with the other gold scraps like the polishing disc,pads.
We certainly do appreciate them, to have a friend custom make our wedding bands is special, to be able to watch him do it more so.
@@GomeowCreations Oh, OK! TY so much dfor responding. I've always wondered about that. I've only worked w/ Sterling...so far. When I have more confidence in my skill I will invest more $ in gold. For now, I practice w/ copper and make my pieces in sterling & a small bit in fine silver.
Very simple models.We do more difficult ones in Turkey.
Ok
This is a poor way to solder rings it puts a HUGE amount of stress on the join the best was it to add a little extra length (especially on thicker bands like this) and then have them meet at a slight angle and saw until flush then solder this way you start the ring in more of a circle shape than an oval and also makes it a little easier
😗😗
Two random questions:
1. Why “Go Meow Creations”? Is is because you want everything you do to be purrfect?😉
2. Is this man a relative/clone? czcams.com/video/k_NjI6LCSqE/video.html His voice and intonation is so similar I thought it was an old video of yours (then I noticed the tattoo and dirty hands!).
1 😍
😁👍
😉
ha ha we can hear that you got a haircut???
😊👍