Also cut the excess because it can leave ghosting. If it bends and air gets under it will ghost. You don’t need a sleeve. You can use painters tape. It’s a lot cheaper. Trust new I’ve had a lot of mistakes and there is a learning curve. I’m not saying it to be mean it anything. Just trying to help.
New subscriber! Thank you so much for being so informative. I’m just beginning my crafting journey and looking for ways to create without breaking the bank purchasing a tumbler press. Your tumbler came out beautifully.
Thank you I have watched so many videos noone say to rotate your image and print in portait not landscape I wasted so much sublamation paper again thank you so much.
I looked, but I think most of my mugs I printed through Cricut Design Space & my tumblers I printed in Canva. I'd do a quick tutorial for you, but I'm out of town. 😊😊
So pretty. I'm a beginner. I purchased a Sawgrass printer. Can you give me some advice on this. Do I need to mirror my picture and where can I get my designs? Thank you!
You’ll love sublimating! Yes, you need to mirror the image. When you buy the sublimation paper, the directions will tell you what you need to do as well. I get my images to sublimate from Etsy & Creative Fabrica. I also just found out about the great Facebook group for sublimation. It’s called Tumbler, sublimation, svg designs:
What is the? "THIS" that you're wrapping the tumbler with and using the hear gun on? You never once mentioned the name of it and that's a very important part
Great question! It's sublimation shrink wrap. The tumblers I used come with their own shrink wrap. I have the tumblers listed in my description under amazon.
I turned a printer I to a sublimation, I use the sublimation ink. Everything I put it in the oven or a sublimation heat press my images have a pink under color to them. And my image are bright right out of the printer.
Did you convert a new printer? Or one that had already been running regular ink? If it’s one that was previously using regular ink, maybe you still have the residual ink coming out as well? Also, as far as the pink shadow. Are you printing in best or high quality? Did you uncheck the high speed, are you securing the sublimation paper so it doesn’t move? Some times it trial and error. If you heat too long it can cause that as well. I would start with following the guidelines of the sublimation paper and mugs. See what they recommend and then go from there. Hope that helps.
So the design space won’t let you do the images to the size of the cup we need to use another way of printing out the images right? I have never sub before. Totally new
You can print and cut it on Cricut design space now. Go to settings on the top left hand corner (3 lines) Scroll to settings, change version to Beta. You're probably on Live. And under Load Materials, change it to 8 x 11 1/2. Let me know if that works. Save your project first.💜💜
instead of paper can you use foil to line the toaster oven? sorry if its a stupid question. Also if you have one where the tumbler can stand inside of it how long on each side would you say?
That's not a stupid question. I just googled it and it said foil can be flammable. Wow! I didn't know that. I use parchment paper. Also, every tumbler is different. It depends on the brand, how big it is, etc. It's really trial and error. I usually try to go by what the sublimation paper directions say. I've been sublimating mine for 3 minutes on each side.
Odd question.. I am doing the 8.6 width but it's not fitting. I even measured and it said 8.6 with a tape buttt I am still getting a gap between the papers... what would you recommend your video has been so helpful
Is your tumbler a 20 oz skinny straight? The printer settings, did you check to make sure you have it set for actual size, 100%. Also, I noticed it makes a different opening the pdf up from the desktop. Hope one of those helps ya! Let me know.
@@user-zk8lg4jz9x I’ve never done it from my phone. I would just double check the printer settings. Also, did you rotate the image? Remember it has to go the long way, so it can wrap fully around the tumbler
Hello. How are you. Can you tell me if the black and decker model t1313sbd will work for making tumblers but it says in description it's convection but the knobs says bake, broil,toast,warm. It looks like one you are using. Thanks bunch.
I looked it up and it says it’s a convection toaster oven. So it should work! (But I’m not a professional-lol). I had another convection toaster oven I started with and it also didn’t have the convection button, I just sublimated it on bake. Hope that helps! 😀
@@creationswithtory okay great thanks so much for replying back what was the temp you use for the one that you used that was just bake and for how many minutes if you don't mind me asking. Thanks
@@ayannablakely4888 we’re on vacay and I don’t have access to my laptop to check. The temperature is the same for bake and convection. So I would use the same temperature I mentioned in the video 😀 happy sublimating!
I haven’t started doing sublimation yet so please forgive me if this is a dumb question. But is sublimation paper the same as like butcher paper? I’ve been told when using a heat press I could use either.
No question is a dumb question. 😀. No, sublimation paper is different than butcher paper. You print your image onto the sublimation paper and then press the sublimation paper against your tumbler or mug. I’m not familiar with using butcher paper for sublimating, but that doesn’t mean it isn’t possible. Hope that helps 😀
ok I must have misunderstood what you said then. What did you wrap the tumbler in before you put it in the oven? Cause that is what I was told I could use the butcher paper for.
I used sublimation shrink wrap to secure the sublimation paper on to the tumbler or mug. I used parchment paper on the metal rack, so the shrink wrap didn’t melt on to the rack. Hope that helps.
@@creationswithtory so much!! Would regular butchers paper work? Also I posted the link to this video in a group I’m a moderator for. Several members had questions about how to use one and this video was so easy to follow I recommended your channel
I don’t remember what oven I used in this video. My black and decker was smaller, so I did have to rotate. In my Oster it’s bigger and I have room for my mugs to stand straight up, so I don’t rotate those. But I do rotate the tumblers. Just to be safe. 😀
Yes, I rotate my tumbler half way through. Also, don’t forget to place parchment paper down first, so the shrink wrap doesn’t melt to the rack. Just FYI, if you’re new to sublimating - you can always pick up a convection toaster oven at a thrift store. I wasn’t sure if I would like sublimating at first, so I bought mine there and got mine for $19.00. 😀
I wrapped the tumbler with Printer Jack sublimation paper (with the image on it) then I used a sublimation plastic wrap around the tumbler - and applied the heat gun to that. Hope that helps 😀
I’ve heard yes and no. I would follow the instructions on the sublimation shrink wrap you use. I usually wait 2-3 minutes and then remove it. But always wear heat resistant gloves. Hope that helps.
You’ll love sublimating! In my descriptions-scroll to the bottom and you’ll see Amazon. I listed the sublimation tumblers there. Good luck! Let me know if you have any more questions.
@@creationswithtory well, I’ve tried three times and even tried using butcher paper painters and painters tape I think I need the shrink wrap or I have bad paper
@@jenniferjones8311 What are you sublimating in? I looked online and it said wine glasses heat for 12-15 min, not sure if that is correct. What sub paper are you using? and did you use sub ink?
@@creationswithtory it just prompts me to go by the printers I installed all my drivers and everything and I still can’t get it to open the file to go to print
@@laurajohnson4748 in printers (search) you should see your printer. Do you? If so, double click and make sure it’s set as default. If you don’t see your printer. Click add new printer. Type in your printers name and follow steps. What are you printing? Cricut? Canva?
@cricutcreationswithtory thank you. I was just wondering before I got the 4 slice.... can't really tell if a tumbler would fit it just looking at the picture on Amazon lol.
Okay please tell me I have the same oven and I burnt my cup last night trying to do it at 400 for 4 minutes. By the time it hit the two-minute mark my cup was burning. What setting do you put it on so that it doesn't burn? I mean is it like toaster is it warm what are you what are you playing the knob on so it doesn't burn! Please help me
My shrink wrap splits my 3 mins. I ordered my prints off Etsy. I got sublimation tumblers from hobby lobby. Mine actually had a line of burnt mark. The 1st one I preheated to long and it was bad. 2nd time. 3 mins and it’s burt again. Idk what the issue is now. I’m doing exactly what you did step by step 350 for 4.5 mins is longest I have got & still burning paper shrink wrap (HTV Ront brand ) is melting cup is burnt. Now I’m ordering internal thermometer to make sure my oven is correct temp
@chrise0515 I’ve never heard of that! I just looked it up & it says when you’re applying shrink wrap, if you put the heat gun too close to the shrink wrap for too long and it’s overly tight. That could happen. I hope the thermostat helps. Let me know. 😀
Finally someone who gets right to the point and says what dimensions to print for 20oz tumblers
Sweet! Thanks!
Those aren’t the dimensions I use and I use it as a business. For a 20oz straight skinny tumbler the dimensions are 9.3x 8.2
Also cut the excess because it can leave ghosting. If it bends and air gets under it will ghost. You don’t need a sleeve. You can use painters tape. It’s a lot cheaper. Trust new I’ve had a lot of mistakes and there is a learning curve. I’m not saying it to be mean it anything. Just trying to help.
Thanks for sharing! I’ll try that, see how it works. 😀
Those dimensions work great for me. I haven’t had any issues. 😀
This is a really cute design. My great Granddaughter would love it.
@@dorothynewsham3743 thanks!! ❤️
What an amazing video so detailed and straight to the point! Thank you so much
You’re so sweet!! Thank you!! 😀
Thank you for the video! You're not alone, I get convection, and conventional oven mixed up all the time 😂
Thanks 😂😀
That was very nice & I loved the Minnie Mouse print ❤😊
Thank you! ❤️
New subscriber! Thank you so much for being so informative. I’m just beginning my crafting journey and looking for ways to create without breaking the bank purchasing a tumbler press. Your tumbler came out beautifully.
You're so sweet!! Welcome to my channel!! 😀
Straight to it and very easy directions thank you it turned out so good
Thank you!! You’re so sweet! 😀
Excellent video. Very informative and straight to the point.
Thank you!! 😀 thanks for watching!!
wow!!! YOU ANSWERED ALL MY QUESTIONS!!!
Yeah!!! Sooo happy!! Thanks for commenting!!😀
Thanks for the demo. Easy to follow and subscribed.
Thanks for commenting 😀
Thank you I have watched so many videos noone say to rotate your image and print in portait not landscape I wasted so much sublamation paper again thank you so much.
Thank you for watching! 😀
Looks great!!
Thank you!! 😀
Great job on Tumbler. That"s going to be my next project. I am making my daughter bathroom items now with sublimation.
Thank you!! I'd love to see what you make! 😊😊
Lovely. Like the way you did the tutorial. Will be subscribing
Thank you!!! You're so sweet!!
Great video
Thank you 😊
Thank you!! 😃
Awesome tutorial. This is a really cool project.
Thank You Thank You👏🏾👏🏾👏🏾
😀
I love this I needed this thank you
Yeah!!! I’m so glad! Thanks for watching! 😍
Look great
Thanks! 😀
Looks great. Love it
Thanks 😀
Awesome job 👏
Thank you!!
Do u have a video on how to measure and sumblimation on coffee mugs via canva
This is awesome
I looked, but I think most of my mugs I printed through Cricut Design Space & my tumblers I printed in Canva. I'd do a quick tutorial for you, but I'm out of town. 😊😊
@@creationswithtory okay thank you!😊
Love this! Great video. Did you turn the cup after so many minutes?
Thank you!!! Yes, I rotated the cup half way through 😀
Too cute
Thank you!! ❤️
HELLO I'M NEW TO YOUR CHANNEL. YOU DID AN AMAZING JOB ON THE TUMBLER.
Welcome to my channel! Thank you! 😊😊
It's cute
Thanks 😀❤️
Hello! Thanks for easy pesy instructions, what kind of heat gun tou use??
Aw! Thanks! I actually bought my heat gun from Tuesday morning. It’s called zap. 😀
Hello, love this. Would you be able to use your house oven or you need a toaster oven ?
You would need to use a convection toaster oven. Once you sublimate in the convection toaster oven, you can not use it for food. Hope that helps. 😀
So pretty. I'm a beginner. I purchased a Sawgrass printer. Can you give me some advice on this. Do I need to mirror my picture and where can I get my designs? Thank you!
You’ll love sublimating! Yes, you need to mirror the image. When you buy the sublimation paper, the directions will tell you what you need to do as well. I get my images to sublimate from Etsy & Creative Fabrica. I also just found out about the great Facebook group for sublimation. It’s called Tumbler, sublimation, svg designs:
@Cricut Creations with Tory Thank You!
What is the? "THIS" that you're wrapping the tumbler with and using the hear gun on? You never once mentioned the name of it and that's a very important part
Great question! It's sublimation shrink wrap. The tumblers I used come with their own shrink wrap. I have the tumblers listed in my description under amazon.
What if my imagines aren’t coming out faded out of the printer. They are actually bright with lot of color?
Are you printing it from a sublimation printer? And using sublimation ink? Usually it’s more faded. Then it becomes more bright with the heat.
I turned a printer I to a sublimation, I use the sublimation ink. Everything I put it in the oven or a sublimation heat press my images have a pink under color to them. And my image are bright right out of the printer.
Did you convert a new printer? Or one that had already been running regular ink? If it’s one that was previously using regular ink, maybe you still have the residual ink coming out as well? Also, as far as the pink shadow. Are you printing in best or high quality? Did you uncheck the high speed, are you securing the sublimation paper so it doesn’t move? Some times it trial and error. If you heat too long it can cause that as well. I would start with following the guidelines of the sublimation paper and mugs. See what they recommend and then go from there. Hope that helps.
So the design space won’t let you do the images to the size of the cup we need to use another way of printing out the images right? I have never sub before. Totally new
You can print and cut it on Cricut design space now. Go to settings on the top left hand corner (3 lines) Scroll to settings, change version to Beta. You're probably on Live. And under Load Materials, change it to 8 x 11 1/2. Let me know if that works. Save your project first.💜💜
instead of paper can you use foil to line the toaster oven? sorry if its a stupid question. Also if you have one where the tumbler can stand inside of it how long on each side would you say?
That's not a stupid question. I just googled it and it said foil can be flammable. Wow! I didn't know that. I use parchment paper. Also, every tumbler is different. It depends on the brand, how big it is, etc. It's really trial and error. I usually try to go by what the sublimation paper directions say. I've been sublimating mine for 3 minutes on each side.
Odd question.. I am doing the 8.6 width but it's not fitting. I even measured and it said 8.6 with a tape buttt I am still getting a gap between the papers... what would you recommend your video has been so helpful
Is your tumbler a 20 oz skinny straight? The printer settings, did you check to make sure you have it set for actual size, 100%. Also, I noticed it makes a different opening the pdf up from the desktop. Hope one of those helps ya! Let me know.
@@creationswithtory I am doing it all from a android phone ...
@@user-zk8lg4jz9x I’ve never done it from my phone. I would just double check the printer settings. Also, did you rotate the image? Remember it has to go the long way, so it can wrap fully around the tumbler
May i ask what the sleeve is u out the cup in before putting it in the tosdter oven ?
I wrapped the cup with sublimation shrink wrap and placed the cup on parchment paper inside the toaster oven. Hope that helps
What oven are you using?
Sorry, I just saw this comment. I'm using an Oster Convection toaster oven. 😊
Hello. How are you. Can you tell me if the black and decker model t1313sbd will work for making tumblers but it says in description it's convection but the knobs says bake, broil,toast,warm. It looks like one you are using. Thanks bunch.
I looked it up and it says it’s a convection toaster oven. So it should work! (But I’m not a professional-lol). I had another convection toaster oven I started with and it also didn’t have the convection button, I just sublimated it on bake. Hope that helps! 😀
@@creationswithtory okay great thanks so much for replying back what was the temp you use for the one that you used that was just bake and for how many minutes if you don't mind me asking. Thanks
@@ayannablakely4888 we’re on vacay and I don’t have access to my laptop to check. The temperature is the same for bake and convection. So I would use the same temperature I mentioned in the video 😀 happy sublimating!
What model is your oven? I saw black & decker but you didnt specify which model.
It was a black and decker model #TO1356SG. It has to have convection option.
Thank you
Where do you get your sublimation tumblers from??
I bought these from amazon. I think there’s a link for them in my descriptions below. 😊
welcher normale Ofen heitzt 400 Grad?🙂
Yes, but it needs to be a convection oven and once you sublimate in the oven, you can no longer use it for food. As it can be harmful. Just fyi. 😀
What kind of tape do u use and wat is that called that u put over the tumbler the white thing
Heat resistant tape & sublimation shrink wrap. 😀
I haven’t started doing sublimation yet so please forgive me if this is a dumb question. But is sublimation paper the same as like butcher paper? I’ve been told when using a heat press I could use either.
No question is a dumb question. 😀. No, sublimation paper is different than butcher paper. You print your image onto the sublimation paper and then press the sublimation paper against your tumbler or mug. I’m not familiar with using butcher paper for sublimating, but that doesn’t mean it isn’t possible. Hope that helps 😀
ok I must have misunderstood what you said then. What did you wrap the tumbler in before you put it in the oven? Cause that is what I was told I could use the butcher paper for.
I used sublimation shrink wrap to secure the sublimation paper on to the tumbler or mug. I used parchment paper on the metal rack, so the shrink wrap didn’t melt on to the rack. Hope that helps.
@@creationswithtory so much!! Would regular butchers paper work? Also I posted the link to this video in a group I’m a moderator for. Several members had questions about how to use one and this video was so easy to follow I recommended your channel
@@mrsravenrose2u Thank you!! That's sooo sweet! I'm not too sure about the regular butcher paper. Sorry.
So you don’t have to rotate? I have a similar oven but I don’t know if I need to rotate
I don’t remember what oven I used in this video. My black and decker was smaller, so I did have to rotate. In my Oster it’s bigger and I have room for my mugs to stand straight up, so I don’t rotate those. But I do rotate the tumblers. Just to be safe. 😀
What were the plastic sleeves she put the tumblers in and shrunk?
Those were sublimation shrink wrap.
Hi, I have a tumbler press but looking for a small oven to do wine tumblers. Can you use any toaster oven that reaches 400?
No, the toaster oven has to be a convection toaster oven and once you use it to sublimate, you can no longer use it for food. Hope that helps. 😊😊
@@creationswithtory Thank you!
What's the white sleeve she slips the tumbler in ?
Sublimation shrink wrap 😀
The bottom of my tumbler is yellow from the heat tape?
I replied to your other thread 😀
To confirm you turn your tumbler part way through
Yes, I rotate my tumbler half way through. Also, don’t forget to place parchment paper down first, so the shrink wrap doesn’t melt to the rack. Just FYI, if you’re new to sublimating - you can always pick up a convection toaster oven at a thrift store. I wasn’t sure if I would like sublimating at first, so I bought mine there and got mine for $19.00. 😀
I didn't get what the white paper your wrapping the tumbler in and using the heat gun on?
I wrapped the tumbler with Printer Jack sublimation paper (with the image on it) then I used a sublimation plastic wrap around the tumbler - and applied the heat gun to that. Hope that helps 😀
@@creationswithtory Yes, thank you😁💯
Do you have to peel the paper while it's hot?
I’ve heard yes and no. I would follow the instructions on the sublimation shrink wrap you use. I usually wait 2-3 minutes and then remove it. But always wear heat resistant gloves. Hope that helps.
The tape mark does not show up
Thanks for sharing. I know it doesn’t show up on mugs, but for some reason I thought it did on tumblers?
how can you sublimate a Disney copy right protected item?
I’m only sublimating for personal use and not selling them.
Where do you get you tumblers from? I am trying to start learning how sublimation works and where to get everything I’ll need
You’ll love sublimating! In my descriptions-scroll to the bottom and you’ll see Amazon. I listed the sublimation tumblers there. Good luck! Let me know if you have any more questions.
Do you have to use the heat gun
You have to be able to shrink the shrink wrap. You could try a hairdryer, but I’m not sure if that will work?
Did you use epoxy resin??
No, I didn’t use epoxy resin.
you need a tape dispenser :)
Lol. I finally got one 😀
What am i doing wrong mine did catch on fire!
Your parchment paper caught on fire??
Most parchment paper is rated for use at temperatures no higher than 420 to 450 degrees. Maybe you used wax paper?
Put a thermometer in the oven. They are notoriously inaccurate. Your oven may have been much hotter than you set it for.
What temperature did you use?
400 degrees 😀
Can you use a regular oven?
No. You can’t mix food and sublimating together. You have to stick w one.
What if you don’t have the shrink wrap?
I’m pretty sure you’ll need it. Most the tutorials I’ve seen used it. You could always try it.
@@creationswithtory well, I’ve tried three times and even tried using butcher paper painters and painters tape I think I need the shrink wrap or I have bad paper
@@jenniferjones8311 Is the tumbler a sublimation tumbler? At least you tried. If I come across any suggestions, I'll let you.
@@creationswithtory I used a sub wine and a ceramic mug. I’m new to sublimation been using epoxy for tumblers.
@@jenniferjones8311 What are you sublimating in? I looked online and it said wine glasses heat for 12-15 min, not sure if that is correct. What sub paper are you using? and did you use sub ink?
What oven you use?
I used a convection toaster oven by Oster.
So glad to know I don't have to buy a tumbler heat press!
🥰
What temperature
400 degrees.
What is the name of the oven?😊
Mine is a black and decker model #TO1356SG. It has to have convection option.
I’m trying to follow you I’m have having a hard to to get my to find my printer
Go to your start button - search field- type in printers. See if that helps
@@creationswithtory it just prompts me to go by the printers I installed all my drivers and everything and I still can’t get it to open the file to go to print
@@laurajohnson4748 in printers (search) you should see your printer. Do you? If so, double click and make sure it’s set as default. If you don’t see your printer. Click add new printer. Type in your printers name and follow steps. What are you printing? Cricut? Canva?
@@creationswithtory I’m about ready to cry I just can’t get to work
@@laurajohnson4748 so sorry.
4 slice or 6 slice oven?
I’m not really sure? I’ve never used it for food. I think it’s 4 slices though
@cricutcreationswithtory thank you. I was just wondering before I got the 4 slice.... can't really tell if a tumbler would fit it just looking at the picture on Amazon lol.
Do you set your convection oven to bake?
Yes. And I let it preheat at 400 degrees for at least 15 min. 😀
@@creationswithtory thank you for your quick response I’m about to sublimate a frosted glass tumbler
@@lachede2002 sounds like fun!! 😀
Okay please tell me I have the same oven and I burnt my cup last night trying to do it at 400 for 4 minutes. By the time it hit the two-minute mark my cup was burning. What setting do you put it on so that it doesn't burn? I mean is it like toaster is it warm what are you what are you playing the knob on so it doesn't burn! Please help me
Is your mug a sublimation mug? It sounds like it isn’t. You have to have a sublimation mug or tumbler or it can catch on fire. Hope that helps
I had the Same Issue
My shrink wrap splits my 3 mins.
I ordered my prints off Etsy.
I got sublimation tumblers from hobby lobby.
Mine actually had a line of burnt mark. The 1st one I preheated to long and it was bad.
2nd time. 3 mins and it’s burt again.
Idk what the issue is now.
I’m doing exactly what you did step by step 350 for 4.5 mins is longest I have got & still burning paper shrink wrap (HTV Ront brand ) is melting cup is burnt.
Now I’m ordering internal thermometer to make sure my oven is correct temp
@chrise0515 I’ve never heard of that! I just looked it up & it says when you’re applying shrink wrap, if you put the heat gun too close to the shrink wrap for too long and it’s overly tight. That could happen. I hope the thermostat helps. Let me know. 😀