Lenny Magill shows off the RBU for Glocks!
Vložit
- čas přidán 2. 07. 2024
- Lenny shows off a convenient alternative for mounting a Red Dot Optic on your Glock. No milling is required, and neither is giving up your iron sights!
The RBU is our Item# 2623 and can be found here:
www.glockstore.com/Red-Dot-Ba... - Jak na to + styl
Another great video! These instructional videos takes a lot of time and effort to produce and we all appreciate your hard work sir. Thank you very much Lenny!🙏
⭐️⭐️⭐️⭐️⭐️
Nice idea. Thanks GS for letting us know about this.
Like you said, keep us posted when Nashville opens. I'm just a few hours away. - Thanks
If you have a set of calipers, you can take depth measurements from either side to get your centering more precise.
A really interesting concept.
Awesome job! Love my Glock’s, now I’m doing mods on all! See you in Nashville👍🇺🇸
As always a very good teacher,,,,I got all your dvds you make learning fun and easy, I think I may get me a red dot for my G23
Got a nightsite version for my G-21 with a vortex viper. I like it, great option without milling the slide.
How has it held up
Awesome innovation!
I am shocked how well this mount worked on my model 45, I did use locktite on my set screws. I decided if I am gonna mount this sucker to the top of my slide, I’m positive it’s gonna affect the finish on my slide. So, my thinking was to do this once, and so far so good. I’ve only run a few boxes thru it and it’s solid as hell. I will try to leave an update but it’s a nice inexpensive way to mount a red dot to a non precut slide. Great product!
Any update brotha?
Update?
Got an update for us?
???????
Your the man Lenny!
Lenny's a legend 🔥🔥🔥
A needed product, Thank you for the great upload.
Cool product
Gracias GS
Ingenious!
Lenny you need to make the Night Sight RBU into a scope mount .. so it sits on top of a scope for close range , low light like an A cog .. use 3 dots not 2 dots for the Night Sights , like a normal handgun set . Or have the sights replaceable , start with low cost Glock stock sights & users can add any sight they like to it ( like Night Sights ) to keep the cost down for people that don't want night sights .
Awesome! Good solution for non-MOS Glocks.
Amazing!
If it was $60 , maybe $80 MAX. But $129 + shipping ? naaaah
Ya just have your slide cut at that point
Shut yo broke ass up
@@ervoro5949 you the one too broke to get the slide cut 🤣
@Adam100A why would you want too cut your a strap for one type of site goofy
@@iceslush32 goofy it’s a lot better and doesn’t sit high af
I had this setup on my G34. Worked good for emergency back up sights, but I didn't like the short sight radius. In the end I bought a aftermarket slide with an RMR cut.
@Aaron Neville Because the front sight of the RMR mount blocks the view of the front sight on the slide..
@@GIXXXER274 what about putting a suppresor height front sight on the slide instead? Would that work if the optic mount did away with the front sight?
I like the idea of milling the slide out for this sight picture: Optic, rear sight, front sight. The problem with having backup sights in front of the optic, you'll pick up the rear sight before focusing on the red dot taking more time get eyes on that red dot. Also, if you do have to do one handed weapons manipulations, when you run the slide against something, you won't risk damaging/ripping off the optic. The rear sight will be running against that item. All you'll need to do is find the red dot. If the battery is dead, just look through the glass. It is a shorter distance, but with most urban combat applications for real world problems (not third world like war), it's a distance that will suffice for that form of combat. As for distance like this product... At that short distance, I think it's better to just go optics only. You train enough, you can use the frame of the gun to aim and hit accurately.
Niiiiiiiiiiiiiice great CHOICE thank magills outstanding
Awesome content and nxt time I'm n Cali I'll swing on thru🤙🤙
We're now located in Nashville, TN!
😂
Galloway Precision has made these for Ruger for a while. Just FYI
They said go from left to right and also use lick tight, acts as a lube wet but tightens up once it dries
Since the front and rear sight is on the optic mounting plate I would think that before mounting the Red Dot optic you would go to the range to make sure that it don't need a windage adjustment.
Exelent video
Could you use a vice or press if you have one available?
Want one
Super cool but $130 for a little metal piece is a bit asinine. A slide cut is better, as you said and those can easily be done for $200 or so...
I thought this would be like $30 maybe lol
Nice
That voice is iconic, you could be voice actor for action cartoons.
Bro shut the fuck up you sound weird as fuck and fucking creepy
@@ervoro5949 someone salty they’ll never own anything of value or amount to anything more than a tax expense at the clink ?
@@SamSung-uc7zd honestly I don’t even remember commenting this I was probly drunk and angry but I’m glad to say I haven’t had a drink in over 4 months and counting I even go to aa meetings I must admit doe I do sound like a douche haha damn
Dagum, it's cheaper to have your slide milled w/ a cover plate. I'm not a shooter that likes a bunch of stuff stacked on my slide, If I want a Red Dot, I want it low & within the width of the slide.
Many guys are milling now for $75 + a $240 Holosun 407c 2moa will do.
It just looks funky to me but it's a good idea, over priced I think. I have a 19x & kinda want my slide milled but I see that gen 3 & 4 milled slides fit & work fine just have to use your gen 5 back plate. However, some many of those milled slides are $400+😱
Will this setup still fit in a safariland 6360 RDS holster? Or does the sight set to high
If you remove the 2 set screws will the dove tale come apart from main body and if so would that not be a better way to set it?
I went ahead and ordered one. I hope it's a good product... The integrated sights are what sold me.
@@d3vaone the fit wasn't that great, had to file it down. In the end I bought a gen 5 mos slide.
Do you need to use the hammer, or will the MGW Glock sight pusher tool work too?
I wish I knew about this b4 I sold my g48
LMFAO!! @ "As you get older....your eyes start to betray you". SO TRUE!! LMFAO.
Alcohol, long stints on deployment or in prison have the same effect on the eyes! Lol
is that exclusively designed as an RMR mount? what about other brands like vortex?
If the dove tail mount is cour correct how can is twist ?
I installed the DoveDot with co-witnessing and a Holosun 507K X2. Then I went to the range. 5 clicks and I was zeroed. The only thing is my co-witnessing iron sights do not match my optics’s zero. How do I get them to match up?
I wonder if this will work on a Taurus GC3? They are cut same way as glocks
So put it in dry then tap it. Got it. Thanks!
Shane Howard 😂
Question is for us Leo guys. With this adaptor. Will it still fit in the safariland rds duty holster made for the rmr
Is there a difference in thickness between the DPP and the RBU? If so, which is thinner? What is the difference in price?
Any chance they come for the 43x?
Would much rather have one that just gives you a taller front sight in the original location as opposed to this version that has the rear and front sight combined on the same base.
Any dovetail mount red dot mount will set way to high. You can make the sights taller like this does but your entire presentation is going to change. For the $150 this thing demands, dont ask me why, you can send your slide to ATEI and get the install done right. Better yet get a glock gen 5 and spend a few bucks more for the model that takes the optic.
Does this RBU)RedDot system require a new holster for the Glock?
Most rmr mounted guns will require a different holster, or you can get good at cutting nylon or kydex and make your own relief for it.
My only question is, how reliable are the iron sights setup on that mount, being the sight radius appears to be awfully short (looks like 2")? I guess only as an emergency backup for close quarters, but forget precision accuracy at further distances.
I used the RBU for at least a year, mabe 2. I was on the fence about a red dot on a pistol and didn't want to sink a lot of money in something I might not like. The back up sight works good for self defense accuracy out to about 15 yards. I have decided red dots do belong on pistols and I now have a Lone Wolf 9mm with a Trijicon RMR in a slide melted Brownell's slide.
CAN YOU USE A SIGHT TOOL?
Does that fit on a Glock 19x?
I just bought a Glock 19 non mos. Is this method suggested?
Did any of you who cut your slide have to change your spring because of the change in slide weight?
I bet my hand: nobody knows. Tons of aftermarket stuff... impossible to measure.
How much does it cost to cut off a glock19 gen5 slide just like the one on this video i want a cut out on top to visual the barrel and also cut out for a red dot optic
Will this mount work on the Glock 48?
Does that red site have auto ON and auto OFF?
I had a dovetail mounted plate before.....they suck. Ended up snapping off from the force motion of the slide.
How much is the mount?
Does it fit Sig Romeo 1??? Please tell me. Thx
Help doesn’t fir glock 19 slide ive been hammering it so hard
????? Can a Vortex Venom sight fit this application of base plate
Hello can you please let me know . if this Mount will work with a Glock 26. Thanks
I wouldn't possibly trade electronics for my night sights. Just remember how night sights changed the ability to sight in without any lighting from the target to see
Does that plate fit on a hellcat pro??If not is there a plate with co witness I want to use a holosun red dot??
Can you put this on the Glock 43x
Is there a UK site for this product?
Do they mskevthe red dot for g21 gen 4
I dunno about the two inch sight radius...
How do I send my g43x slide for machining for the red dot sight. Thanks
I am from saint lucia here we mostly use the glock 25 which is the exact clone of a glock 19 gen 3 and 4 will this work for it?
Can't you just use a press to insert the dovetail?
How I order one
Does it work on a cz p10c
I would agree with the price if they had tritium in it.
not sure if i like this, seems a lot of weight slapping around on the dovetail cut, and using screws in it also pulling it up on the cut. time will tell. kool idea if it works
My concern is the screw down screws. Will they leave a mark on the top of the slide if you chose to remove the red dot sight do you have two big screw marks in the top of the slide?
The set screws are into the dovetail, not the top of the slide. That area which will be filled with the rear sight if you put it back on.
Dueck Defense product.
Why don’t they make these for everything?
Is this supressor height sight? Just wondering if maybe would be better to remove the front sight off the mount and just replace the front sight with supressor height sight
Look up Dove Dot Mounting Solutions.
Hi Mr Magill i got a G43x the regular one, not the G43x MOS and i would like to know if you guys will have a plate that goes for my G43x the universal one with the tritiun on it please hit me back on it so i can buy it. Tks
Look better if it sat more flush and the sides matched the slide so it doesn't look like its sticking out so far.
I'm think the same... They could have rounded the sides over.
I think it’s pretty much the same width as the optic.
I can’t believe the Glockstore doesn’t have a sight pusher available. 😂
xxfire07 They probably do, but he’s showing the install method for people who don’t.
site probably says they do but he doesn't want to wait for 2 weeks before they even ship it just to find out they sent the wrong one and expect you to pay return shipping and repay the original "free" shipping + 15℅ restocking fee.
I can’t tell you how much I wish this didn’t have the front sight attatched. No brainer buy for me if it didn’t have that
Any particular reason it takes ten days after i order and pay for products from your store for it to even ship?? It's really quite ridiculous.
outdoors 4life I agree. I don’t buy anything from Lenny anymore.
@@tangotwo4743 i mean, i wanna support the guy. Its just really inconvenient to wait that long, and unfortunately i am a man of convenience lol
I think its a California thing... whenever I order something gun related from Cali it takes a week to ship.
I feel the same way. I love GS but because they take so long to ship orders, I usually order from somewhere else 😕
GS has always shipped my stuff within 3 days and I'm not in CA. I even bought a firearm from them and in 4 days total they had located an FFL near me, gotten the paperwork from the FFL, shipped the firearm and I was able to pick it up. Excellent customer service at least in my experience.
Now we need one for a SIG P320.
Asking for anyone that works in LE. Does anyone recommend a duty holster that will hold a Glock 45 with this RBU and a Holosun 507Cx2
You can put way too much torque with a handle that size. You’re better off with a standard Allen key. Using a long side at first and 1/ 16th to an 1/8th turn after that with the short side.
Has anyone has success mounting one to a Canik TP9SA?
Why did mine take the force of a million suns to
Get in? Lenny’s is just sliding around.
It's been 2 years and I still dont have my gunbutter.
But if you tighten to much you are pushing up on it
Why not use a sight installation tool? Interesting concept, but I will keep my current set up (suppressor height night sights and holosun 407C).
You completely missed the point of the product... If you are already using a 407c, that means your slide already has the RMR footprint milled out. This product is for someone who either doesn't have an optic footprint milled or doesn't want to lose iron sights by using an optic mount that replaces the rear sight.
Loctite & use a torque wrench.
So for over $100 I can get the shortest iron sight radius I’ve ever seen on a handgun AND raise my RMR even higher? I appreciate the effort, but, no thanks....
@Sinister 240 Nobody ask you
And add unnecessary weight!
Yea. At this rate, you might as well get an additional slide for some platforms
These are a pass until they make a new model. First off is the price - the price for the night sights is $160 with shipping.. slide milling at my local gunsmith is $200. You literally might as well just get it milled. Furthermore they either need to dramatically increase the sight radius by lengthening the device, or dramatically shorten the width of the front sight post. Honestly I would do both.
Cool, but I'm just gonna stick with getting my slides machined.
What do you think lenny is on?
I also noticed hes acted a bit strange in this video, as if he's angry, like something really made him mad shortly before filming, i wouldent dounbt it, as great as his job is im sure he deals with idiots all day, the gun community is so toxic honestly