How To Build A Manual Machine For Under $30 - DIY
Vložit
- čas přidán 17. 05. 2024
- Building A Manual Trainer Earlier This Year Helped April So Much With Learning To Manual And Wheelie. In This Video We Show You How To Build A really Safe, Stable, and Compact Manual Trainer For Just Under 30 Dollars. Materials Needed Listed Below.
How To Use A Manual Trainer:
• How To Use A Manual Ma...
Materials:
Quantity - American Sizing - Metric
1x Board - ( 2" x 6" x 8") - ( 38 x 140 x 2438 mm )
1x Board - ( 2" x 4" x 8" ) - ( 38 x 89 x 2438 mm )
1x Hook - ( 3 1/2" x 5/16") - ( 90 x M8 )
~ 20x Screws - ( 2 1/2" ) - ( 60mm)
Optional Items:
3x Bolt - ( 3 1/2" x 1/2") - (90mm x M14)
3x Nut - ( 1/2") - ( M14 )
1x Bolt - (6" x 3/8" ) - (150mm x M10 )
1x Wing Nut - ( 3/8" ) - ( M10 )
4x Tire Traction Pads
Cut List:
( 2"x6"x8' ) - ( 38 x 140 x 2438 mm )
1x ( 48" ) - ( 122CM)
1x ( 20" ) - ( 50CM)
1x ( 18" ) - ( 45CM)
2x ( 4" ) - ( 10CM)
( 2" x 4" x 8" ) - ( 38 x 89 x 2438 mm )
2x ( 24" ) - ( 60CM)
1x ( 6" ) - ( 15CM)
2x Scribed Board - (18") - ( 45CM) - 1x 40 Degree Angle & 1x 50 Degree Angle
▶ If you really like what we are doing and want to support us we have a few different ways you can help out below 😊
#1 We have some links to our favorite products listed below. Using our link doesn't cost you any money at all but it really helps us out with a small commission of around 5% :)
#2 Join Our Patreon - / ridemtb
Our Patreon is a place where we like to communicate with our crew one on one, brainstorm new video ideas, and do monthly hang outs! Being a Patron can also unlock some exclusive discounts so you could save money and support us at the same time!
#3 - Get to Amazon Via This Link - www.amazon.com/shop/ridemtb
It doesn't cost you anything extra next time you shop and Amazon will give us a small commission for directing you there!
Thank you guys for everything! We are so glad to have you as part of our crew!
Kyle & April
www.ridemtb.com/
▶ All of our Pov, Video, and Audio Equipment - www.ridemtb.com/gear
▶ Most Common Equipment Questions We Get:
Bikes we use - jenson.sjv.io/Vy42rO
Kneepads we use - jenson.sjv.io/qngmZO
Helmets we use - jenson.sjv.io/6bGnd3
Kyle’s riding gear - jenson.sjv.io/yRrjjy
April’s riding gear - jenson.sjv.io/vn2QQN
Kyle's clipless shoes - jenson.sjv.io/BXKOy4
April’s flat pedal shoes - jenson.sjv.io/n1nPWR
Our favorite chain lube - jenson.sjv.io/BXKRWy
Kyle’s signature handlebar - bit.ly/2SdbllD
Seat dropper post - jenson.sjv.io/P0am3e
Kyle’s clipless pedals - jenson.sjv.io/Xx1GnM
April’s flat pedals - jenson.sjv.io/n1nPoa
Tubeless sealant - jenson.sjv.io/e4RegZ
Wheelsets - jenson.sjv.io/jW1QZa
Brakes/Derailleur - jenson.sjv.io/gboqg0
Favorite riding pack - jenson.sjv.io/5bj162
Foundation bike stand - jenson.sjv.io/3P7yyA
Feedback bike stand - jenson.sjv.io/2rKyMG
▶ Huge thanks to our channel partners for helping us keep these videos ad free during the middle of the video!
Jenson USA - jenson.sjv.io/P0aaRQ
Niner Bikes - bit.ly/2T9yqWm
Project Filter, Idaho fights Tobacco - bit.ly/3gq4hdv
SR Suntour - Suspension - bit.ly/3w84b0L
Stan’s No Tubes - Wheels and Sealant - bit.ly/3x33JRg
Schwalbe Tires - bit.ly/3itSzRJ
PNW Components- Handlebar, Stem, Grips, Dropper Post - bit.ly/3fC8pVU
Ergon - Saddles - bit.ly/2SnpsEL
Apparel and Protection - bit.ly/34IqcqM bit.ly/355BaH2
Ride Concepts - Shoes - bit.ly/3gBuJRx
Shimano - Brakes and Drivetrain - bit.ly/3pfvPGa
Onnit - Supplements and Snacks - bit.ly/3x6E1vi
0:00 - 0:45 Intro / Overview
0:45 - 1:20 Materials & Cut List
1:20 - 1:57 Back Brace
1:57 - 2:38 Wheel Channel
2:38 - 3:54 Stabilizer
3:54 - 5:43 Angled Side Braces
5:43 - 6:58 Wheel Stop
6:58 - 7:43 Hook, Traction Pads, Tie Down
7:43 - 8:31 Test
8:31 - 9:43 Finishing Work
9:43 - 10:39 April Trying It, Overview - Sport
All Materials and Measurements Are Now listed In Both Metric & American Standard In The Description! Hope you enjoyed the video! Let us know if you have any questions at all :)
Here’s a question, why do you run sr suntour suspension?
@@hunterwright386 he’s sponsored
@@hunterwright386 Have u actually try SR Suntour high end class sus? U might be surprised, especially if you research a bit more on them
wow nice 😁😁😁
This makes so simple, I’m going to build one this weekend, Thanks!
Built this. Within a few seconds of using it realized I've not been letting my shoulders go back nearly enough. Very cool tool
Awesome!!!
Confidence, I have the same issue that’s why I’m building one, I don’t know why I can wheelie with no fear but manual I just freak out
Built my manual trainer this past week. Thank you so much for the explanation, materials, and cut list. I will say that I have a lot of work to do to get comfortable in the manual position. Thanks!
Nice job. I”ll be doing this before spring.
Kyle, I sure hope you are doing okay and feeling better. Please do not rush your recovery, hang in there and know that your people are keeping you in their prayers and wishing you well.
I like how you explain things in the most simple and direct way. I guess I can say your methods are just for this era. Thanks for the vids. Can't wait to see April do the manual 😁❤👏
Glad you like them! Its been really fun learning how to make better videos and communicate with you guys better :)
Last thing I need is another project, but I’m absolutely building one of these. Thanks for the plans, you and April rock!
Thank you! 😊
Your videos are so well done and helpful. Thanks for sharing with all of us. I built the manual trainer in under an hour and glued all the joints. I m very happy...
I built one yesterday with your measurements. I've just done some wheelies today. It's amazing. Thanks.
I built this today Kyle! Your instructions and the cut list was really helpful and spot on. And the tip you gave to attach few pieces cut out from an old tire really kept it from moving around.
Awesome to hear, glad you built one!
Thanks Kyle and April! This is another one of your videos I've shared with our MTB youth club trainers. Good job!
Awesome! Thank you!
You nailed it to the wall with this video.
I was on the fence about building one but given my lame attempts at getting to the balance point I know this will help. I also ride a unicycle and I remember learning by spending time in the balance pocket was key.
Thanks for clearly listing the items needed for this. Finally , the compact nature of this design is what is pushing me over the edge to build one- can’t wait.
Glad this one was more helpful!
Thank you Kile & April, i've built my manual trainer with your recommandation. It works perfectly. Good vibes to you from south of France !
Great to hear! Thats awesome!
Hey there. Just wanted to say THANKYOU for this inspiration. Just built this manual trainer yesterday to keep progressing in winter time. Keep those videos coming.
Merry Christmas all the way from Germany ;-)
Kyle we have just spent a couple of hours making this Manual Machine, the instructions were clear and I think we are going to have some amazing fun using it. Thank you
Great to hear!
Great vid! I recently built one of these and didn't feel like it was helping me at all... until I went out on the trails. It really does build that muscle memory. It's also an amazing bike washing stand. You just have to rotate the wheels to get them all clean. Great content, keep it up!
Thank you! 😊 It also makes a pretty bike stand.
Derek! You da man brutha 💯🤙🏼
Great job on the manual trainer. You even got the seal of approval from April when she smiled. I’m going to build one based on your instructions as well. Thanks again👍
Thank you! 😊
Thanks you guys! Great project for the upcoming winter holidays when I'm off work. I just got a new miter saw so this will be the perfect project to break 'er in! Been wanting to build one for some time now, and your instructions & video will make it easy! Thanks for the detailed instructions and parts list. All of that makes these projects less daunting.
Glad it was helpful and will give you a good project for your new saw!
i just buit it! Excellent explanation! Both of you deserve all my respect and appreciation. Keep up the good work. And Kyle i wish you all my best regarding to your health issues!!
Take care!
This is the best video for Manual trainers. It turned out amazing. Thanks for sharing.
Glad it was helpful!
Another brilliant episode April and Kyle. This has inspired me to think laterally to develop something similar for a lesson with kids I'm involved with. Great Idea.
Great to hear!
Wow you did an amazing job at explaining this in detail and at detailing that thing! Thanks for the work you put into these videos!
Great tutorial. Thank you. I was able to build one with the scraps I had in just over a couple of hours. Works great too. I still haven't mastered the manual, but that's more an issue of the trainee vs the trainer. Thanks again.
You guys getting me excited!!!
Got the wood and written down the measurements.
Now to finish work and get started on it.
I love your videos guys. You're pro but you explain so simply. you guys rock - thanks for making the vides and sharing them.
This is great! I WILL be building one of these sometime in the next couple of weeks. I'll be using mine outside, so I will probably put (removable) spikes on the bottom to keep it in place on the ground.
Well done! I like the compact nature and the copper bling!
Thank you! Cheers! It was super fun to build!
Amazing video - always walk away from these videos encouraged! Your passion and enthusiasm for the sport always wants to make me get out and ride! (Or in this case, work on those manuals!) Thanks for the time you've put into these videos - super helpful!
Great to hear, thank you! 😊
Just finished biulding it last night, I already feel the improvment thank you so much your vids are always really helpful and entertaining!!!! :D
Awesome!
Why is it the second that April comes on the screen I can't help smile....her voice, smile, and bubbly personality;...i.e. infectious...great vdo of course too on the machine from kyle
Aww thanks Pete! 😁
Couple days ago finished building the trainer. Today tried it the first time! It really helps to improve riding skill! Soon I’ll ride like a pro on the rear wheel!
Awesome, great to hear!
I’ve built a manual trainer before and I can say from experience that this one is much better! Thanks for the tutorial guys!
Thanks Aidan!
Great video, I now have a simple winter project and skill to practice.
Thanks you two!
Happy Holidays
Happy holidays!
So good! This is exactly what I’ve been looking for. Love the more compact design.
Glad you like it!
Awesome work guys! I love the finishing touches!
Super neat job Kyle. And you even tidied it up to make it look good! - Looking forward to the next video on how to get the most out of it. Also, impressed with how tidy your garage/shop was - no clutter & everything on shelves in storage boxes. But, I bet you forget where things are, with no labelling on the outside!
Thanks for the compliments! Kyle seems to know where everything is, but I seem to always be lost! I don't spend enough time in there haha
Great clean and precise build! I built a manual trainer a ways back, but found it took up too much space to be practical. I love this compact version! I added a small piece of 2x6 on the upright, on the back side, so that when not in use it stands on it's end like a tripod. Great video and looking forward to the next. I never knew you should try it with the chain off.
Glad it was helpful!
Great stuff! I've wondered if I could "shrink" mine to save little space and now I know I can. One other Item I added to mine was a small j hook at the rear end to allow for easy wall storage.
Saw this video yesterday. Builded it today,ofc without these fancy screws. And i can tell one thing. It feel weird :D cant wait to train on it every single day before the season starts. Thank you for sharing it . Respect that you included (cm) scale. You saved me some time. Have a nice upcoming season Kyle and April! 🖖🤘🚴🚴
Hope you have fun training with it! 😊
Great video...again! Recently bought some power tools for some home repairs. Now that its done, I will begin work on my machine! Thanks! The added bling is nice.
Thank you, having good tools is so helpful and fun!
Nice build Kyle! Love the finish work. Details make a huge difference. The size is also nice 👍
Thank you! 😊 The size was one big factor in making a new one.
Just fan mail -- Thanks for all the great videos! I have been mountain biking since I was a teenager, but I learn a ton from every video. Keep up the good work!
Great to hear! Glad you like our videos Lucas!
Just subscribed!! Been watching your guys videos for a few months now and didn’t even realize I wasn’t sub, I am a veteran with PTSD but have found biking to be a great help in my recovery I just wanted to say that my family and I love your guys videos and I really want to say thank you from the bottom of my heart it’s because of you guys that my wife and son have started mountain biking with me your guys instruction videos are great and have helped and given us lots of confidence. Unfortunately we have hardtails but hopefully one day we can afford to get into full suspension, I’m sure they will build our confidence even more. If I might ask what model bikes do you guys have? they look great!! Keep the videos coming you guys are awesome!
This is great! Ive been wanting to build one, Im totally going to build this. Thanks for making it!
Hope you enjoy it!
Hello K&A My daughter love your videos....just build a Training...now we having fun 😊. To fit 27,5 wheels I just cut a second wood ....to fit next to one for my 29er...simple. Again you guys are awesome 🙌
A little late here but got around to building one today. You directions are the best Kyle, thank you. I used the bolt an wingnut option to hold the tire in place and didn't drill the holes close enough to the tire to hold it in pace. To fix this I added a bunch of electrical tape wraps around the bolt to take up the slack an it worked fine. Didn't read all the comments so not sure if anyone else did the same but wanted to pass what I did on. Thanks again, your videos are also the best!
Edited the next day - this device can also be used to learn to stand on the rear wheel and find that balance point, for rear wheel hopping and also the balance point for endo's simply by putting the front wheel between the wheel support instead of the rear. Now it was really worth the time constructing it.
Thanks for the tip and update Rob! I am excited to try it as an endo trainer!
I built one with my son today. We used one of the cut off diagonal pieces as the stopper for the front of the back tire. Thanks for the tutorial!
Awesome, hope you guys had fun building it!
Man this thing is sweet. Now I know what to make to practice on a rainy day. Thanks for all the great information.
Glad to help!
Was wondering where you guys were... Great to see y’all and I’ll be making a trip to HD to pick up some stuff today !!!
Awesome, hopefully you have fun building it!
Thanks, it's a great, efficient plan, easily built. I "improved" it by using 6" wood screws for the lower angle board attachment, upper hole.
Thank you for the good idea 👍. Just bought the material today and tomorrow I’m gonna make one for my manual training 🤟
Hi Kyle,
I built a manual trainer in your first video and have now modified it using the new dimension. Much easier to move and store.
Thanks
Rich
Great to hear Rich!
Just built one myself using your vid! Thanks! Made minor adjustments for my tire size and I’m good to go! This is sweet!
Awesome, hope you have fun using it!!!
A simple plywood triangle does a really good job as a brace as well
Thanks guys, I am definitely going to make this a project for the Christmas break!
Awesome!
Great video Kyle. You are very good at this. Best of luck to you and April in your future ventures 😃😃👍
Thank you very much for all you are doing to help me safely learn mountain biking skills! I'm very grateful for your videos. I just realized I hadn't subscribed, so I crushed it since you crush it.
Glad to hear, thanks for subscribing now!
Nice job-
I'm going to copy this at my earliest convenience!
This looks fantastic. I wanted to make your last one but it seemed so long to store in garage. I’m building this one within the end of nest week. This awesome!!!! Thanks so much!!!!
Yeah this one turned out a lot better!
Just built this with my son (a little 9 year old downhill shredder) this morning - what a difference it has already made! We have been trying to learn to manual for the last few weeks with no success. I can now see where we were going wrong. Very very impressed thanks guys!
Oh and thanks for the metric measurements - very useful down here in New Zealand 👍
That’s so rad!! Have fun you two :)
Loved it. I’ll be building one soon!
I just wanted to say thanks as a newbie MTB rider, this was a fun project to build and is helping me a lot.
Great to hear!
Yup, ... there's [almost] space in the garage for this project (beside the table saw, and between the Wahoo Kickr & the rollers). Awesome. Thanks again for walking 'us' through, ... with great descriptions throughout. November is shaping up! Thanks, yet again.
Glad you liked it!
I think ghis is the best manual machine ever! Thank you for uploading this.. I'll go to shop tomorrow and build one
Great video thanks guys! I built one on a rainy day, and it doubles as a great bike stand!
Awesome, yeah makes a nice bike stand!!!
Thanks! Another awesome jobs guys 🙌 I'm going to build one this weekend!
Hope you enjoy it!
This looks rad. Thanks for putting this together.
Glad you like it!
That's well smart, deffo gonna build one for the winter...
Thanks for putting the measurements in the description!!
Awesome job ! Going to build this and train. Sure it can help me with the wheelies I used to do younger too. Great video !!
Awesome! Thank you!
I built my manual trainer off of your first video. One thing I found was to make sure the diagonal wheel supports clear the rear derailleur when the chain is off. The derailleur shifts back a bit when there is no chain on it. I made mine asymmetric with a smaller drive side wheel brace, and larger brake side brace to accommodate this after finding the issue.
I love the copper and stained finish. Nice extra touch.
Thank you! 😊
That turned out so nice! We start building one at sunrise... 😀
Awesome!!!
Hi, we've built one and it is super helpful for all of us in the family (kids and adults). Thanking you a lot.
That's great to hear!
Nice! Will build one over the x-mas holidays. Love these vids, super instructional! :)
On another note it's almost a little uncanny how April is a dopplegänger to an ex of mine from ten years back
Thats funny! Thanks for watching!
I love your work, Kyle :) One of my philosophies in life: if you're gonna do it then either do a Quick'n'Dirty or do something spectacular. So I love that you went the extra mile - especially that you clearly got a kick out of doing it too :)
Thank you, so stoked on how it turned out!
I love all your videos and what you bring to the community, and also you are such a nice couple, keep the good work!
Thanks so much Jose!
Hope your holidays are the best. Thanks for what you do!
Thank you! Hope the same to you 😊
It’s cold and wet outside...off to my favorite lumber yard! Thanks guys. Love this.
Awesome, hope you have fun building it!
@@AprilRideMTB Finished the manual machine. It works great, just need a little practice. Thanks again!
Aha! I’ve discovered I have been wanting to bend my elbows too much.
We built this today and shared your YT on TikTok! Thanks!!
Hope it was fun to build and try!
This is my winter project. 🥳
Hi there, I built this yesterday in about an hour with wood I had on hand. Took a little tweaking to get going but want to say that it's definitely a work out and it will force you into using technique versus muscling the bike up. A few minutes a day will likely make a big difference. Economically it's a no brainer. Less than $20 in materials or $300-400 for the bougie version.
Thanks for putting this video out!
Top end respect to dewalt gear
Thanks for the like Kyle and April!
Built it! The hardware store didn't have timber in the the right dimensions, so I winged it. I used 40x200mm as the base, which is very stable on its own, even without the sideways "training wheel" board, so I shortened that to 400mm. I attached a couple of old, cut-open inner tube parts to the bottom so it does not shift on my floor. Works great and is very stable.
Manuals are still not working great, but I'll be getting there ;)
Great to hear! 😊
Awesome build video. Thanks for all the details and guidance.
Glad you enjoyed it!
Insane! Thanks. Glad to hear you are feeling better. So scary!
This video is awesome! I love all the tools the compound miter saw is amazing! Dewalt is a bomb brand, rigid is my favorite, I’ve done a lot of home building and loved seeing a hero build something. It turned out awesome!! If you stain a lot look into a wood conditioner, it will change the game! Great video!
Thanks for the tip and glad you liked the video!
One Fancy Manual Trainer!! Nicely done man!!
Thanks! 👍
My co-worker showed this to me. Great idea!! Great job! 👍😎
What a great idea, thanks for sharing!
Yay! When I saw you post on your story about this I was super excited!
Hope you enjoyed it!
@@AprilRideMTB for sure did
Thanks for the video. Totally making this this weekend.
Have fun!
Always look forward to your guys videos. Thanks for all the imfo
Thanks for watching!
Just went out and slapped one of these together with stuff I had round the house, thanks for the video.
Awesome, hope it helps you!
Just built this and its awesome. Thx for the design Kyle & April. Few notes to share:
- I would recommend cutting the two 2"x4"s that form the "wheel tray" to 24.5" - 25.0" so you have a bit more material as the tire holding bolt is quite close to the end when drilled for a 29" wheel
- I cut the angle struts at 45 degrees each as my saw doesn't go past 45 and it works just great on both my 29" and 26" bikes. As you stated, this is definitely one of those bits everyone may need/want to do differently
- I used 4" screws in a few spots for extra strength
- I didn't find that I needed the last 6" 2x4
Haven’t been able to manual yet, this will definitely help! Thanks for the video!
Happy to help!
Yea that's awesome great job on the trainer and thank you for sharing . I will definitely give it a go.
Have fun building one!
Thank you I will. Great videos by the way
That looks awesome great work Kyle.
Thanks so much Gino!
Dude, that looks great!! After watching a few of your videos, I think I'm gonna have to build one.
Hope it helps when you do!
I can’t wait to build mine, great work!
You are really a perfectionist 😀. Nice job!
Thank you! 😊
I’ll be building one of these soon. Hopfully within the next week. Nice little project.? Thanks guys. You are both awesome x
Hope you have fun making it!