Nerf Elite 2.0 Echo Review
Vložit
- čas přidán 25. 08. 2024
- I know this is late for the Nerf community but here's my opinion and review on the elite 2.0 Echo
Links:
Coop772: / @coop772
Lorddraconical:
/ lorddraconical
AmericanFoam:
/ brads6116
Amazon:
www.amazon.com...
Target:
www.target.com...
My discord: / discord
![[REVIEW] Nerf Elite 2.0 Phoenix CS-6 | The New Stryfe](/img/n.gif)
Broooo. I own like 20 nerf guns & i couldn’t for the Life of me remove the mag from this gun. I was bout to return it because i heard about it’s quality control issues with the whole line. Then i saw you have to prime it forward first, then it releases. Thanks to you 🙏🏽
lol no problem, just remember it's the same for all mag fed springer blasters
How?
Thank you for your review! This blaster wont be released in my country until like in six months so I have plenty of time to think if I really want to buy it and every opinion helps!
No problem, you might want to weigh the pros and cons a bit cause the entire line is a hit and miss
You just earned a sub!👍🏽👍🏽👍🏽
Thank you very much
Pretty good review man, keep it up!
Thanks!!
More surprised to see an elite 2 that actually works. Also i think how its put together is more so for cutting down cost
yeah me too, i know its meant to be cheaper but it makes it hard to tinker and this blaster is actually more expensive than all others before it
@@Busters2005 its like alpha strike but even worst haha
Yeah you can actually mod more with alphastrike than elite 2.0
@@Busters2005 yeah it wad clip together none of this sonic welding BS
Yes, alpha strike was clipped shelling and simple internals while elite 2.0 is being clipped, solvent welded, and glued together. There kind of punishing the mod community and hint hint I have some mod vids coming up
I have it and I regret getting it, the stubby stock makes it worthless trying to aim, the first day I had the blaster in jammed 12 times, and to make it better most of it is glued together and not screwed so you can't take it apart and paint it a different color. 2/10
yeah, well I don't regret buying it even though it sucks, The stock has some major problems. First of all the back of it is higher than the actual blaster itself making it useless and with the attachment point that no one asked for makes it uncomfortable even if you got a stock extender. I haven't had any jams when I used it but I also haven't done much with it, I do also explain that it is glued, welded (melted together) and screwed shut so theres no way of getting inside without breaking it. Thanks for your comment, nerfs quality has gone downhill
Can you give it to me free then?
I like the look of the front half but didn't like the back half. I think this actually looks better than delta trooper design wise. My favourite is still the retaliator though.
Same, the barrel looks a lot better than the stock and the stock just doesn't really fit well with the blaster. I somewhat agree with it looking better than the delta trooper though. While the barrel and some parts of the actual blaster part look cool, I like how big the priming handle on the delta trooper is and how the stock is actually usable. And yes the Retaliator will always be "the" top prime blaster. Thanks for your comment
cool vid! though I recommend you lower down the music a bit. Make it more in the background, unless that’s your style
I tried too, thanks though it was kind of hard to sure of it
Like!
Thanks, glad you enjoyed the video
@@Busters2005 😉
Oh hello
@@_de_6uff Hi
basically the echo is the better version of the elite 1.0 delta trooper
honestly I think the delta trooper is better than the echo, mainly because you can actually open it and mod it. Also I think the delta trooper is better because it's much better stock, larger magazine, and has a larger priming grip. What makes you think the echo is better than the delta trooper, I would like to know your your side
Nice vid
Thank you
👍👌😁👍👍😁😁😉
lol glad you enjoyed the video
Use the orange elite darts because the blue elite darts didn’t want to go in my magazines
That’s odd, both worked for me. Maybe just gotta push each dart down at a time and slide them in. If your not already doing that
@@Busters2005 maybe it’s because of that one dart in my double punch that doesn’t look good
@@sodypop649 that could very well be it
You are very good with edits
Thanks!
İ cook the elllitteeee dartsss nam nam nam
I'm confused but ok
How do you remove the stock(back part) of the nerf echo? I can’t remove it and the instructions says to press the rectangle shaped button
Yeah you’re just supposed to push the orange tabs down on both sides to unlock the stock and then pull it off the peg while holding down. I’m guessing yours happens to be stuck then? My only suggestion is to pull really hard while keeping the orange tabs down
@@Busters2005same with me i cant
just subscribed
Thank you very much, just passed 50 subs!!
Yo la tengo es una chulada de pistola
This is my 3rd nerf gun
Nice
Does it lock? Is it common to crash?
What do you mean by does it lock and is it common to crash? Like is it easy to break?
Really cool product for me.
glad you like it
DID YOU KNOWWWWW that you can acl fit 11 bullets in the mag?
You can but it’s not recommended as it can really compress the darts
@@Busters2005 ik that already
I can’t twist the barrel off and can’t get the shoulder stock off
Hm, I don't know how I can really help with that. It can be a little tight, for the barrel try pulling it while twisting. For the stock I guess just make sure the orange tabs on the side are being pushed down while trying to pull it off. I hope that helps
Looks fine but bring back icon with the recon and maverick
I agree. I think they brought back the recon maverick but not the recon yet. You can find those things in goodwills pretty easily though
Pls help brooo
Cant take out the stock
Its new
My first time with something like this
I had nerf disruptir and flyte cs 10 and this is the third one
Barrel attachment is ez
But stock
I just cant
Pls helpp
Plss
You’re supposed to press the 2 orange buttons on the side down to release the stock and pull it off as you’re holding them down. If it’s stuck for whatever reason try to do that and pull a bit harder, but make sure your holding the orange tabs out while doing so
@@Busters2005 i did
I twast openin
Now it is
Does it have good accuracy under 10 meters
Please tell honestly
It’s all about the darts, the blaster just depends on how powerful the shot is. Elite darts suck, no accuracy. But I can recommend adventure force waffle head darts, you can get 200 for like 10 bucks at target and Walmart and they have great accuracy
i love this gun 😻
Nice
nice veido .done my part.come and join with us.greetings from srilanka .good luck.
Thanks
I buy this one before
Nice!
It jams all the time, it sucks
Luckily mine didn't jam while using it but I know a lot of people have had jamming issues like you
Mine didnt jam ever since ive used it. You not using crumblely darts?