GD&T Application Live Stream
Vložit
- čas přidán 10. 09. 2024
- I discuss applying GD&T to a simple assembly.
This is my first livestream. I'm a little disappointed with the audio, but I think it's good enough. I will improve on the next stream.
This will be different than my previous videos, as it is recorded live. It's a little more conversational, and I do interact with the live audience.
These GD&T application videos where you talk through your reasoning are GOLD. Thank you so much for taking the time to make these!
Thank you so much for the type of content and the delivery quality you provide! A big fan of your work!
I hope you do well with this type of videos. I really appreciate your effort to share your knowledge. I’ll try not to miss the next live. Great Job.
Thanks so much! It’s going well so far. I’m thinking about doing a morning version on Fridays to appeal to more time zones.
you are impressive, not a single word or gesture or suggestion of no kind out of the subject, no distraction, just the info, ciao..in youtube...
thank you a lot, keep it up
Wow, thank you!
Great video! Keep going it so useful!😊
Thanks! I’m planning to do these weekly.
Turn the gain down on the microphoine, its too "hot" meaning the audio is clipping.
Thanks, I changed my setup after this video, should be much better.
We need more video like this
Thanks!
Yes we do, more examples to understand the principals of GD&T@@RDeanOdell
Hey i have a small doubt about datum select, does datum(in your example) work with the 3-2-1 rule?
Hello. This video is brilliant idea, since transition from theory to practical thingy and decision making process, and, most important, why those decisions are made is often left unexplained. I would like to ask for more of such videos and one more little thingy, could you please very breefly explain about datums taking away DOF espesially which DOF are taken away and show them. Because it is one of those fundamental things on how to choose datums. You've mentioned that datum A taken away DOF but which one of them?
Other than that I think this video is very helpfull.
I apologize if this isn't the right thread to ask this but where can I find general rules for what can and cannot be used for a common datum such as A-D?
The CMM software I am using won't allow me to a plane and a cylinder for a common datum because the cylinder isn't perpendicular to the plane. The standard has very limited information on it. I would like to explain to both the design engineer and the part supplier why I can't use the datum structure as drawn other than "the software won't allow it".
Hi, I made two videos about common datums recently. Have you seen those?
@@RDeanOdell I watched the first one, I didn't get to the second one.
@@RDeanOdell Second video didn't really help. The standard is horribly vague at times, and this is one of those instances where it is. I do agree with you on the examples you used, most of the time it really isn't needed. The non-coplanar example in the standard is an example where it makes sense.
Great Explanation! I work for automotive industry. We design plastic parts, and some times is difficult to apply GD T on complex plastic parts. Could you make a video on how to define this type of parts with Datums targets etc?
That’s a great topic! I have some lecture notes on datum targets, so it could very well be the subject of the next livestream
@@RDeanOdell hope so!!
it would be easy if you explain all the ASME 14.5 rules in a sequence. please make a video on it. and thank you for this amazing video
India❤
Nice topic and nice to you see you in direct video, one question can you pls tell me how to decide the tolrence number in DRF or for datum A or B...🙏😊
Hi Dean ! Can you please cover a topic called Gauge R&R or GRR.. various situations, such as what happens when Repeatability is good but reproducibility is out and vice versa.. what needs to be changed process or design tolerances to bring R&R within acceptable limits. Why GRR? Is it part of Measurement system analysis (MSA) or Statistical process control (SPC)
I think the slot should be the primary datum which is functional and the width should be control through profile tolerance or not position tolearnace because there is no datums to locate it.
Hope the complete solution will come soon on this
Looking for more sessions like this 🎉
Is there a reason why datum plane B isn't your primary datum? I'm used to seeing a plane as primary datum. Thanks
Thanks alot sir
Great. I hope I do not miss the next one.
Thanks! I’m thinking about doing one per week on various topics, right now it will be Monday 5:00pm EST
@@RDeanOdell Thanks for the information. I will not miss it.
Thank you for the session.
You're welcome! Thanks for tuning in.
🤟🤟🤟
Just a little buzzy, volume is ok
Thanks for the feedback!