How to remove the fairing off a ST1300
Vložit
- čas přidán 25. 08. 2024
- If you would like to help, see how by clicking the read more link at the bottom of this text.
In this video I demonstrate how to remove the fairings off an ST1300 also known as a Pan European. Whilst not particularly difficult to do, if done incorrectly, can result in the fairing being broken, and expensive to replace. This takes you from the first to bolt to the last...
If you would like to help keep the lights on and contribute to the channel you can donate as little as 1$ per video or a maximum per month on my Patreon page - www.patreon.com/gtsgarage
If you would prefer a one off donation as appreciation for something you've learnt on the channel, you can donate to paypal.me/buckinghamjf
If you are looking for any of the tools or products i use in the garage, you can also help the channel by using the links below and purchasing the product through my affiliation with Amazon. I also get a smaller amount, by just opening the page through one of my links below and browsing to any product of your choice.
Teng 7 Piece Screw Driver Set- www.amazon.co....
Parker 200Amp Welder - www.amazon.co....
Motorcycle Lift 1000lbs - www.amazon.co....
Ryde Wheel Chock www.amazon.co....
Paint Stripper - www.amazon.co....
2023 and your video is still helping us out! Thank you for the helpful video. Got my police bike apart and back together easily with your help.
Thanks for sharing this and all your videos. Your content has been the best that I've found on CZcams for DIY ST1300 maintenance. Your step by step instructions have been perfect and easy to follow. Thank you.
I have a 2012 ST 1300 and had to replace the turn signal switch assembly. Couldn’t get to the connectors. Was dreading taking the faring off. Your video made it so easy. Thank You
Thank you Sir! Hope you're still enjoying MC riding. I've been doing it for 60 years and am always learning.
Thanks for taking the time to make this well detailed & informative vid. I took mine apart to bleed the brakes (two weeks ago) & need a refresher to remember how it goes back together lol
Thanks so much for posting this video. Knowing the order of disassembly and where to find the fasteners is invaluable. Thanks again!
Hello, I just bought an '03 and want to give it a good cleaning, thanks for the tutorial. I see all those JIS Phillips screws and I see a lot of socket head / cap / allen screws (call them what you will) in my future, I also see a lot of use for my electric screwdriver. Good job, thank you.
This is very straight forward and say compared to the Concours14. That bike is a nightmare to work on. It is as though the spark plugs were the first thing fitted to the assembly stand.
Hey thanks mate! you saved me hours in a lot of frustration Dash and I’ve done this before. Lol.
Invaluable - thanks so much.
Cheers buddy, just got my Pan and will be taking these off for a good look round over winter. That has saved me some time. Cheers 👍🏍
Thanks for posting, that helped me a lot.
Thank you
Big help thanks very much.
A really informative video! Thanks mate! Shiny side up!
Man thank you for this. I have to do this to trace a faulty wire on my 05
good video mate, thank god someone did it
Thank you for the video. Great help.
Good platform
Thank you
Thank you...about to replace my horn so I'm hoping this helps. I believe I only need to remove the right side (as seated on the bike) to do this.
Great video. Half of the man hours in a dealer is taken removing the plastics. Worse with a scooter.
Cheers buddy, surprised just how much of the labour cost would be removing and replacing the plastics. Ride safe.
Actual removal starts @1:50
Thank you very helpful video quick question.Would it be safe to ride with all the ferrying off. To save time and money when going for repair ??
Thanks ! That's a lot of Tupperware !!
Now I see the problem. I've been using a crowbar and 3 pound hammer.
I believe both methods are just as effective lol Hope your well sir, were in the mid 20's over here, with a cool breeze, is the perfect riding weather.
Do you still have your ST?
I have a problem: The key on my locking glove compartment is broken. Rather, I think some debris fell into the key mechanism. Regardless, I cannot open the glove box to gain access to those internal screws. I may have to break the lock, then replace it. Darn it.
How many bits and bobs to take off so i can fit speakers do you reckon?
Edit: a better question might be, how much of the fairing needs to be removed in order to fit speakers?
Very informative. Thanks. Anyone know roughly how long to remove both sides and front (assuming nothing is seized up) as I have to replace the down pipes on mine and am trying factor in a time scale. Optimistically hoping I should have the pipes off an back on over a weekend 🤞
What are those bottons on the side of the fuel tank??
Was that the video you mentioned in the brake bleeding video?
I would have been changing as many screws as possible to hex heads....anything with a Phillips style head is a problem waiting to happen...
Not wrong Roy, the copper grease will hold it for a while, whilst I order in the new bolts. Why anyone would put that type of bolt near the back wheel, beats me, but shouldn't be surprised, its the same people that put a maintenance item at the back of an engine, and makes taking out the engine, an acceptable process of replacement.
GTs Garage ....unfortunately ended up with a scooter few weeks ago 2011 and almost every screw is rusty so I'm on eBay buying 100% replacements and hex heads not those useless Phillips style....hmmm
@@GTsGarage Hi, a very informative video. The maintenance item on the back of the engine that you mentioned, is it on the Honda ST1300?
Hi, one question. I just bought the speakers kit. To install it do i have to unmount everything or is there are shorter way?
Bluetooth helmet speakers
Can I just take the front bit off to change my screen motor?
What a phaff, great video.
Thanks Chris, appreciated.
Can you provide the make and model of your heated grips? Thanks
Hi Bill, apologies for the late response, the grips fitted were the factory fitted ones. They just have Honda written on them.
A see a rugby shirt are u a rugby league?
Not a huge fan, certainly would take a match over a day tinkering in the garage lol