950KV
Vložit
- čas přidán 8. 04. 2024
- This is an #Eflite Power 15 #Brushless #Outrunner Motor alternative I’m testing out with a Castle creation Sidewinder 4 brushed/brushless compatible esc.
The motor is 950kv so it should have a decent low end throttle speed, it is also only rated for 40-45amps so be cautious, the drag brake seems to work fine I’ll look to test something more steep.
Some reasons for this test:
Tinkering
Torque benefits
Sounds different
Low speed
Weight distribution
Had fusion 2 in 1 but wanted more weight forward without having to purchase more weighted parts.
Outrunner motor has less weight so I can focus the esc’s weight location to be build critical. The Outrunner motor helps with allowing more setup space and for clearing links when skid is at or lower then axle height, which for some motor lengths will be in the way of some moving parts.
Chassis: #injora LCG kit for scx10ii
Motor: #eflite Power 15 #brushless 950kv
Esc: #castlecreations sidewinder 4
Servo: #Ecopower wp120t
Transmitter: #Sanwa mx6 3ch
Receiver: Sanwa wp
Skid/motor mount: injora aluminum for scx10ii
Transmission: plastic case metal gear injora for scx10ii
Axles: injora scx10ii all metal
Body: #Prolineracing cliffhanger Cab only
Front bumper: injora (might end up taking it off)
Tires: proline racing #trencher tires 4.75
Foam/inserts: injora blue silicone
Wheels: injora beadlock
Winch: Dsm offroad kinetic winch
Lightbar: Attack 2” led bar
Shocks: desert lizard 100mm all around - Auta a dopravní prostředky
SW4 esc beep code:
* * - = radio glitch
The throttle curve through the esc programming was adjusted and I think the expo on the transmitter is causing the glitch maybe I don’t know power is cutting out but not throwing lvc code, the light bar was an indicator of something going on. Maybe time for better radio?
Update: yup it was the expo adjustment I did on the transmitter that caused the beep error reset to zero and, no beep error yay.