Glad I can help, it was much easier than I expected. Just make sure you have some extra washers if you don’t have a hardware store close by in case you run into the same issues I did with the bolts in the kit being too short.
www.steinertractor.com/FDS3364?crawlparam&gclid=Cj0KCQiAvbiBBhD-ARIsAGM48bwf7TUXi1SXZPGSX_SxqRUcH9yiy-iI_SRdUIn4C88UMvw_ctE5pToaAnYoEALw_wcB around $300
@@southernyankeeinnovations if you do not like that handle sticking forwards you could drill it out and mount it from the back side. Here is a vid this guy shows the end result. czcams.com/video/sf7y2nVNwH0/video.html
Always hold the fitting in your right hand and teflon tape in your left. They you get it on the right direction. Think, it has to wrap onto the fitting so that it doesn't bunch up when installing. And start one thread back from the end to keep the tape out of the hydraulic system. I actually came here to see what valve you sourced, and from where?
Thank you sir. It’s been awhile now. I believe it was this one www.reliableaftermarketparts.com/products/hym40-0179-hyd-remote-valve-kit-4-cyl-1?currency=USD&variant=32297112862803&stkn=74b0779be3fd&gclid=CjwKCAjwyNSoBhA9EiwA5aYlbwwzEItHcGcyjFF4xya8SAARMvFMbM8hKoLCLb5muFWeL44Kyimb0BoCowYQAvD_BwE
Thank you for the video, I have a Ford 3600 and wanting to install a hydraulic center or top link. very helpful.
Glad I can help, it was much easier than I expected. Just make sure you have some extra washers if you don’t have a hardware store close by in case you run into the same issues I did with the bolts in the kit being too short.
send link for video
price
www.steinertractor.com/FDS3364?crawlparam&gclid=Cj0KCQiAvbiBBhD-ARIsAGM48bwf7TUXi1SXZPGSX_SxqRUcH9yiy-iI_SRdUIn4C88UMvw_ctE5pToaAnYoEALw_wcB around $300
@@southernyankeeinnovations if you do not like that handle sticking forwards you could drill it out and mount it from the back side. Here is a vid this guy shows the end result.
czcams.com/video/sf7y2nVNwH0/video.html
Good
Ilove ford
That's gonna be another Rachel Gingell
La válvula que tiene arriba para que lado va o va al sentro como está en el video
YE pamp kitane ka he hame chahiye kya YE palati Palo me Bhi Kam karega
Sir I want buy this product ,which side? I use any I idea am from India
India. Tell about me, how your products purchase
Buona sera, dove posso trovare anche io il pezzo
I got a similar setup. Mine came with 4 snap washers where do they go?
All I remember was the crush washers that went under the fitting on the hose mounting on the valve
Hey brother! Do you know how to make this valve body single acting?
Unfortunately I’m not sure.
Always hold the fitting in your right hand and teflon tape in your left. They you get it on the right direction. Think, it has to wrap onto the fitting so that it doesn't bunch up when installing. And start one thread back from the end to keep the tape out of the hydraulic system. I actually came here to see what valve you sourced, and from where?
Thank you sir. It’s been awhile now. I believe it was this one www.reliableaftermarketparts.com/products/hym40-0179-hyd-remote-valve-kit-4-cyl-1?currency=USD&variant=32297112862803&stkn=74b0779be3fd&gclid=CjwKCAjwyNSoBhA9EiwA5aYlbwwzEItHcGcyjFF4xya8SAARMvFMbM8hKoLCLb5muFWeL44Kyimb0BoCowYQAvD_BwE