Full Pitch and Short Pitch Winding (Worked Example)
Vložit
- čas přidán 30. 11. 2016
- A SIMPLE explanation of Full Pitch and Short Pitch Winding. Understand what Full Pitch and Short Pitch Windings are, and what Coil Span is. You can read more about Full Pitch and Short Pitch Winding at: www.electrical4u.com/armature...
Comment below with any additional questions you have. If you enjoyed this video and want to see more like it, please LIKE and SUBSCRIBE to our CZcams channel.
The pole pitch is defined as the peripheral distance between the center of two adjacent poles in DC machine. This distance is measured in term of armature slots or armature conductor come between two adjacent pole centers.
Pole Pitch is naturally equal to the total number of armature slots divided by the number of poles in the machine. If there are 96 slots on the armature periphery and 4 numbers of poles in the machine, the numbers of armature slots come between two adjacent poles centers would be 96/4 = 24. Hence, the pole pitch of that DC machine would be 24. As we have seen that, pole pitch is equal to total numbers of armature slots divided by total numbers of poles, we alternatively refer it as armature slots per pole.
Coil of dc machine is made up of one turn or multi turns of the conductor. If the coil is made up of single turn or a single loop of conductor, it is called single turn coil. If the coil is made up of more than one turn of a conductor, we refer it as a multi-turn coil.
A single turn coil will have one conductor per side of the coil whereas, in multi turns coil, there will be multiple conductors per side of the coil. Whatever may be the number of conductors per side of the coil, each coil side is placed inside one armature slot only. That means all conductors of one side of a particular coil must be placed in one single slot only. Similarly, we place all conductors of the opposite side of the coil in another single armature slot.
Coil span is defined as the peripheral distance between two sides of a coil, measured in term of the number of armature slots between them. That means, after placing one side of the coil in a particular slot, after how many conjugative slots, the other side of the same coil is placed on the armature. This number is known as coil span.
Thank you for watching!
If you want to learn more about Coil Pitches (or Coil Spans), you can read our full article at: www.electrical4u.com/armature-winding-pole-pitch-coil-span-commutator-pitch/
The synthetic voice sucks
Thanks
I learn something new every day.thank you for keeping this simplified .
Amazing explanation and pure video/animation editing! THANK YOU SO MUCH🙏
Thank you for helping me understand the electrical windings information. Peace
Oh beautiful. very good explanation.
May you live a long life Full of gladness and health . May all God's blessings descend upon you. May peace be within you may your heart be strong. May you find what you're seeking wherever you roam.
Great video.. I am relearning the basics, thank you a lot
Superb sir..nice explanation... Thanku so much...
Wonderful explanation
Thanks hope motor rewinding more video , great teaching
We have a 3 phase generator with a stator consisting of 288 Nos of slots with 24 poles double winding and 3 parallel paths. It was stated front pitch is 2-11 & the back pitch is 1-11 (LAP Winding). Can you clarify how it has been determined? and if it's short pitch how can I define coil pitch since coil pitch is not the same as pole pitch?
Thanks for your video.
Great work
How is it possible to finish the winding now that there is half of this phase in the slot where otherwise there would have been the first active length of the third phase coil. Does this not end up with two empty slots left over?
Thanks
Thank youu!!
Very nice. My congratulations.
Nice lecture. . .
wonderful explanation.Keep Going.
Thanx
Thank you sir 💖💖💖💖🙏🏻🙏🏻🙏🏻
brilliant explanation , keep it up.
but I think for 5th harmonic: cos(5*a/2)=90 , a=30 and for 7th a=25.7 degree.
Nice my dear sir Mr gora. ...thanks.
Excellent 😘
With the help of rotor voltage and rotor current of slipring induction motor,how to select external resistance for rotor resistance starter ,please explain
may I know how can I make this kind of animations
Very good video ! Thanks
I wonder why NPTEL videos don't get these many views🤔that are GOLD compared to these ones!
What will happen if we increase the coil pitch of a rotating machine
It will become more closer to pole pitch so the emf will also increase till max value of 2E
2:58 "span" is misspelled. thus, this video is perfect for youtube, digital land of idiocy.
What is the winding difference between a motor that works with 50Hz vs 200Hz?
Please tell which software you use
oh very nice video
l can't say how he described
Can any one take out moter winding formula
very nice video
3:50 Still defining the terminology.
I have two N52 Magnets Size 2"L x 1"W x 3/8"H and Magnet wire Diameter 0.0367" 19Awg, I will have One Magnet face North and other South But I need to make One Magnet wire Coil that both Magnets will be rotating 360 degrees in center of One Coil to produce at least 14 Volt and light up 150 watts light bulb, Im at lost to know How many turns of magnet wire I need to do or have to produce what i'm looking for the out put.
should also mention that its for space harmonics only
thanks
Sir, concentric winding In number running coil and starting coil calculations formula given.
Anyone pls tell me just what is formula for pole pitch (Yp) in above answers a. Z/P b. P/Z c. Z/N d. N/d
I am so confused pls tell me answer from above options only
Pole pitch is defined as the peripheral distance between the center of two adjacent poles in a electric machine. This distance is measured in terms of armature slots or armature conductors that come between two adjacent pole centers.
Pole pitch Yp = Z (number of armature conductors/slots) /p (number of poles)
✌️✌️✌️✌️✌️✌️✌️✌️✌️✌️
Sir take out moter formula every moter formula
iloveyou full
Why 6+1 ?
Just a friendly question, why are most of the motor winding videos on CZcams done by people from India? Surprisingly Indian women too.
..?
Plez lenguse translate to urdu
Pl .put the picture first then lable the parts and. Reduce the verbal articulations.
kindly remove this automatic reader. the human voice is more comfortable to understand
Painful...
Pls try to change the voice.Give ur own voice that could be better to hear than this foreign voice.
Winding incorrectly will result like his voice
i didnt learn. you used less visuals all writing
Just confused theory. No practice!
the voice is very bad !