LEHLE DUAL EXPRESSION

• Expression Pedal with 2 outputs
• Controls all common devices with expression inputs
• Magnetic sensor technology, without mechanical wear
• Precise control from digital potentiometers
• Optimised size and weight
Express yourself, twice! The LEHLE DUAL EXPRESSION is an active, wear-free expression pedal equipped with a precise magnetic sensor.
Known from the LEHLE VOLUME pedals, this sensor uses the Hall effect, named after Edwin Hall, to measure the strength of magnetic fields.
In the LEHLE DUAL EXPRESSION the Hall sensor is accurately calibrated to the built-in magnet and the control range of the pedal - where the pedal moves only the magnet, whose distance is measured by the Hall sensor.
Two digital potentiometers, working with analogue voltages up to 18 V, are used for the precise and reliable generation of the expression data.
This technology allows distinctly more accurate operation than is offered by conventional expression pedals with mechanical potentiometers. There is no mechanical wear, avoiding the need for maintenance or complicated adjustments.
Both outputs can control nearly all common devices with expression inputs from 5k to 100k, regardless if TS, TRS or RTS - the polarity can be switched and stored using the soft-push buttons.
Alternatively, the 10k output can be set to work as a latching or momentary switch, if the pedal is pushed in fully toe position. Then e.g. the channel of an amp can be changed or, connected to a switch-input of a digital device, any desired function can be controlled.
In use, the LEHLE DUAL EXPRESSION is extremely smooth and steady under foot, as it is equipped with low-friction bearings of a high-performance polymer. By means of an adjusting screw the mobility of the pedal can be modified with great precision.
Compared to the LEHLE MONO VOLUME we were able to reduce the weight by 50% and the size by 35% - with the same rugged stability. It’s even 2 cm flatter, however the pedal range stays the same - just as comfortable and responsive as the larger models.
Light, small, and twice the precise expression: LEHLE DUAL EXPRESSION.
www.expression-pedal.com

[@WARLOCKPLATINUM]

Can this be used as volume and wha in the quad cortex? Switching between both on the same preset?

[@LehleSwitcher]

Yes this should work fine.

[@purplewound]

Will this work with Kemper as expression pedal? I'm also planning to use it as an expression pedal to control my Amp Sim Plugins.

[@LehleSwitcher]

Of course it works with a Kemper.
And yes it works with "Amp Sim Plugins", too, if they can be controlled via MIDI.
Coming from TGP?

[@purplewound]

@@LehleSwitcher yep 😊

[@benfinleyperformer-compose3722]

I'm hoping to use both a Chase Bliss Blooper and a Montreal Assembly Count to 5 with this, will it work?

[@LehleSwitcher]

We have email contact, right?

[@benfinleyperformer-compose3722]

@@LehleSwitcher yes, thank you

[@carbonloops]

Can it be used as a volume pedal too?

[@LehleSwitcher]

No, unfortunately not.

[@gersongomez1876]

@@LehleSwitcher is there somewhere I can read about why it won’t work as a volume pedal? I would like to get this for my Quad Cortex

[@LehleSwitcher]

Gerson, if you want to use it with the Quad Cortex, then you use it as an expression pedal.
An expression pedal does not process audio, but expression data. These expression data can be used by devices such as the QC to manipulate values. Such as volume.
You see, in the end the DUAL EXPRESSION controls the volume.
Take a look at the manual:
lehle.com/EN/Lehle-Dual-Expression

[@Hermiel]

Any videos coming out on this pedal? I don't see any reviews on CZcams. Hall effect expression pedal is a cool idea.