The Cheap Resin Phone Screen Repair Trick - Fix the smash for a tenner!
Vložit
- čas přidán 10. 01. 2024
- Turns out with £10 of stuff and a little time you can fix your screen enough to get a bit more life out of this. After a few days it really seemed to clear up more. Perhaps some sun-level UV made the difference, either way, its a great fix to try!
Amazon UK:
Lamp: amzn.to/48tuzoS
Resin: amzn.to/3SbRe3m
Amazon USA:
Lamp: amzn.to/41QESAV
Resin: amzn.to/41WApgc
If you would like to buy me a coffee or support the channel you can do so via Patreon at / backofficeshow
I do have some bits and pieces on my web store at backofficeshow.com
Please note: As an Amazon Associate I earn from qualifying purchases. As such links to Amazon products within this video may fall under this. Thanks to all of you who use these links and help support the channel - you are fantastic!
Thanks you lovely people, and keep on tinkering! - Věda a technologie
Aw, you didn't break your new Christmas present, did you Andrew? O.o
But if you want to clean anything and don't want to leave residue/lint/fluff, use coffee filter paper! they're treated not to fall apart, a lot of people use them to clean TV screens as they don't leave streaks either.
Ha ha, fortunately not, my pixel is alive and kicking apart from the mandatory crack in the screen protector!
That's some great advice about the coffee filter, I'll give that a try.
To be honest this solution is somewhat inspired by yourself, an earlier video years back you mentioned UV cure glue and that stuck with me 🤣
@@backofficeshow Really? Aw, bless you Sir! That UV stuff is called "Bondic", it's great as you can fill broken off parts in things, also heard people using it for tooth fillings in the past. Also gives off a weird minty smell when it dries.
Oh, I saw someone else use a vacuum pump to suck the filler into the cracks on a broken phone, do you own anything like that? I suppose even just putting it in a zip lock back and sucking the air out would do it too.
@@Larry That's a great idea, I have some mylar bags that have a built in value from my sous vide experiment days, they come with a little hand pump. Definitely sounds like something with giving a go.
The kits for car windscreen drive chips use a syringe with a sucker on them for similar purpose. You first use the syringe to evacuate all the air. Then you release a valve so that the glue goes into the cavity. And finally you push the syringe back in to pressurise that glue even further into it.
This gets better with age, looked at the phone today and the cracks are almost invisible. Maybe the Sun UV hardened it even more, who knows?
Is it that difficult to follow clear and simple instructions? Why would you not give it the full 30 mins to cure properly
@@korzer It does not say cure the 'full 30 minutes' on the instructions. In fact it makes no suggestion as to the time required. The resin seems to gel within 60 seconds of the UV being applied, in fact, the UV light seems only to cycle at 60 seconds, probably to not give people doing their nails finger cancer.
@@korzer LOL, this IS Andrew remember!!
Share a pic then.. please
@@methanoid I found an online line to the booklet: r.mtdv.me/UV_Resin_Instructions
When you're sanding plastic like photopolymer resin you can do wet sanding for a better result. Just some water in between to prevent the heat from sanding to rough the surface.
I will give it a go on the next smashed screen! 🤣
@@backofficeshow Haha, hope you don't need to mate!
Just did this to a windshield crack. It recommends heat to help it creep in the cracks. Heat and giving it more time seems to help, especially if its an old crack with contaminants.
That's a good idea, it's really cold here right now, so that definitely isn't helping
A+++ Highly recommended video if you want to learn how to fill a crack
🤣 did you fill your crack sufficiently
@@backofficeshow Filling wasn't a problem. the razor blade though...
@@custardo sometimes you need a trim
@@backofficeshow if not Andrew will fill your crack 🙂
Nice ❤
Glad you like it possible bot
@@backofficeshow the last comment was joke 🤣
(Plot twist) Unless you're a bot 🤯
That's just the sort of thing a bot would say
So now, the broken screen has been permantly bonded to the rear case in the upper right corner.
Not really, the screen + digitiser + glass is its own assembly. So the few mm of resin between the substrate of the screen frame to the metal of the case would be a seriously weak bond
Perhaps the two bottles are for mixing like epoxy?
I think they both contain the same liquid, but just two bottles picked from random batches. The kit was in a little baggie so possibly it's made with leftovers from the production line of a better kit
The reason I don't like curved or rounded screens.
They binned that aspect in the latest design. Not only makes screen protectors a chore to apply, but also cases don't really accommodate the curve so you are wasting the edges.
Two pixel features that used to be a lot better 1: the dedicated fingerprint reader and 2: squeeze for assistant!
Hi, I hope you can answer a question
My phone screen was damaged it had a crack it took a white but i finally gave it in for repair went back and they tried few screens and each new screen had lines so phones been further damaged the motherboard has been damage the phone people don't know how I wanted to know how can the motherboard get damaged and did lines appear when all it was a screen fix. Also can it be fixed
Sounds like the socket that the screen ribbon goes into has been damaged
@backofficeshow thank u so much can it be repaired
@MdDm-tx3kc possibly, but they are really difficult to work with without damaging them
@backofficeshow thought so
Can anything like pics apps I've already had on be saved or transferred onto another phone if it is damaged
This should be possible as long as the phone is still turning on
Argggh. Why do they make phones like wet bars of soap. 😂 hmm would this work on a cracked crt neck, but I guess there's no way to restore the vacuum.🤔
No way to restore it, not unless you like glass blowing 🤣
I do not 🤣@@backofficeshow
Agreed. Pixels are ridiculously slippery. Do not use without a case. My 6 Pro has not needed a new screen yet, knock on wood.
I'm on an 8 pro and broke the glass screen protector within days. I suspect my pocket lint consisting of random metal artefacts, screws and paperclips is a phones worst nightmare