These Blast Gates Have a Fatal Flaw. Fix It in 5 Minutes.
Vložit
- čas přidán 7. 07. 2024
- Cheap dust collection blast gates have one serious design flaw... but it can be fixed in less than five minutes with one piece of duct tape. #dustcollection #hack #woodworking
📦 PRODUCTS IN THIS VIDEO 📦
• Cheap Blast Gates (Paid Amazon Link): geni.us/hwiM8
• 3M Duct Tape (Paid Amazon Link): geni.us/hDZjs0y
• Aluminum Blast Gate (Paid Amazon Link: geni.us/UK63x
• 12 DeWalt Miter Saw - best saw around (Paid Home Depot Link): geni.us/Nt4uT
Links above are affiliate links, which means you pay the same price as always but we make a small commission, which helps out our channel - so thanks!
🎬 CHECK OUT THESE RELATED VIDEOS! 🎬
• 5 Blast Gates Compared: • 5 Dust Collection Blas...
• Can a 3D Printed Saw Blade Cut Wood?: • Can a 3D Printed Saw B...
• $23 DIY Planter Box: • $23 DIY Planter Box
👕 LRN2DIY SHIRTS, HOODIES & MORE 👚
lrn2diy-merch.creator-spring.com
📸 MY FILMING GEAR 📸
Here’s everything I use to film my videos, including cameras, lights, microphones and more: kit.co/nilsynils/my-filming-gear
🕶 SOCIAL MEDIA 🕶
Facebook: / lrn2diy
Instagram: / lrn2diy
Twitter: / lrn2diy
TikTok: / lrn2diy
📲 MORE DIY GOODNESS 📲
Check out our many projects and plans at
lrn2diy.com
📲 WANT TO LEARN MORE ABOUT 3D PRINTING? 📲
All things 3D Printing at The 3D Printing Zone
/ the3dprintingzone
📚 TWO FREE AUDIOBOOKS! 📚
To get two free audiobooks from Audible, just follow this link: goo.gl/QGFC4Q
00:00 The Design Flaw
00:32 Testing the Gate
01:37 Solving the Problem
03:48 Testing the Fix - Jak na to + styl
Thanks for an amazing simple fix. Now do not need for dissembling frustration out the window. You should market this idea its genius. Thanks for sharing....
Dude this is amazing! You are amazing! Of all the stupid dodgy 'hacks' this is a legit cheap and easy solution to make a cheap item perform like the most expensive in it's class. Bravo!! 10/10 mate!
This worked great for me, thanks for the idea.
I was just about to buy a half dozen self cleaning models, to replace all my crappy $6 models. Awesome tip! You just saved me $$! Thanks!
Man... Thank you... I set up my dust collection system less than a month ago,and every one of these cheap bladt gates is stucks as much as a half inch open... Ive watched several videos on how to remedy this issue, and this is by far the easiest. Great video
That is incredible! Thanks for the great tip! I've always had trouble with blast gates for this very reason!
Right? I now use these throughout my shop without worrying about loss of suction.
Fantastic, I'm am flipping my dust blower to the other end of my ducting and was looking to improve my blast gates because they jam up like you say. So now i can modify these gates to work properly. Thanks for this idea!
Thanks Nils, I have 4 of these plastic gates on my system that do get clogged from time to time and will not close. I will try this simple elegant fix. Subscribed.
Love all these videos! Thanks for sharing.
Tried this with Gorilla Tape and it was an utter failure; tape never moved, even with some encouragement from me. Tried again with some cheap-ass Office Depot duct tape and it worked like a charm. Thanks for the simple/cheap fix!
Excellent solution Nils! Smart thinking.
Thanks, Frank!
Nice tip. I have watched several blast gate builds, but I don't have the setup yet to accurately build them, so this is perfect.
Ingenious! Thank you! I hate cleaning these things constantly!
Cool! I am going to try this. Thanks!
Great idea! For my purposes, I shouldn't even have to use the tape after making the cut! (Although if needed, I can always add the tape later!!) By the way, I'm using 2 1/2 inch system to a ShopVac.
Nice work.
Thanks, Adam
These plastic blast gates are such a pain in the butt they get clogged all the time and not exactly easy to remove the stuck saw dust away. This looks like the way to go thanks so much!
Had this exact problem, can’t afford fancy blast gates, thank you so much!!
Great video, and it makes a huge difference. I didn’t find a need for the duct tape personally though.
Fantastic video, thanks!
Thanks, Joe!
Very good idea. I might just try it myself. I dont have any problems at all at the moment, but it's a very clever idea.... Congratz!
Nils,
Thanks very much for sharing this info. I was in the process of just replacing all these gates because of their poor performance. That meant buying more expensive ones (more expensive has to be better, right??) 😎
I also considered trying to build my own which would have been very cheap but time consuming.
I just made the update on 7 of these, including some cleanup sanding and folding/applying the tape and it took less than 10 minutes.
I hope to have this all up and running in the next week or two and will share the results.
Thanks again
It works… fantastic 🎉
I’m in the process of trying this. I started cutting the end with the miter saw. But that felt pretty sketchy hi don’t have zero clearance fence set up for support). The saw actually tried grabbing the gate, but I was ready for it and no real damage to the gate, and I didn’t get hurt. So I wandered over to the bandsaw and that worked just as good and frankly felt safer. Just my 2 cents.
I have four of those, not set up yet, sitting in a box, but that sounds like a good idea
I tried this on several gates. Nice idea. It may not even need the flap valve. After seeing where the dust accumulated, I decided to just drill 3/8 holes through the bottom layer of plastic. The holes are right in the corners. Don't valve these. The airflow should keep the corners clean. We'll see.
That’s awesome! It’s work! Thanks for the tip! I don’t need to buy new one, save money .
Great!
Perfect. My gate on my drill press always clogs. Air compressor blast eventually cleans it out but why. In the shop tomorrow trying this out. If it futzes up I’ll buy a new one! Thanks.
Did it work for you? I cant wait to get out to my shop and try this
I got a few of those on amazon, have yet to work on my collection system tho... I guess I'll do this "preventative maintenance" beforehand. Thanks
Good call. I just finished installing my system and I've learned SO much. I'm now working on an automated switch system for it and it's all a ton of work but I'm sure it'll be worth it. Just FYI, I have a "Tips for Designing and Building a Dust Collection System" (or something along those lines) video coming out in the next several weeks.
@@LRN2DIY I'll check it out too. Good content 👍
Awesome ty - I have those same gates and 3 are clogged
Very good follow through to what I was considering. How did you remove the stop on the edge of the flat piece that slides? Thanks!
If I'm following what you're saying, I didn't. There's a lip that is 90 degrees to the slider and I left that in place. I only cut off all of one side (both the cartridge and the slider) and taped it.
There are two types of these cheap blast gates. One, such as the Woodstock or similar, have a straight, square bottom edge on the blast gate door. The other, such as Powertech or similar, have a curved bottom to the door. The curved type is not suitable for this modification. It leaves too large a space in the new, cut opening. The square edge type is the only one that will work.
Doing this right now actually and I think the brand of duck tape has something to do w it too because I tried black 3M first and it was too stiff to close flap so now trying og gray duck tape brand
Could you do a step by step of fixing a garage flouro that doesn't work even with new tube
A regular maintenance of silicone spray also works! And instead them with the gate down!
Wouldn't silicone spray make the dust stick even more?
This worked great for me, now the only problem is that the suction is so strong that it slides the gate back in and closes the gate somewhat. Lol
Haha! That's pretty wild. Maybe cut a small hole in the flap to alleviate suction? I haven't seen that issue before : )
so i did this with out re watching the video, time to redo it cuz i done did it wrong
$6 😳 here in Wales they're $20😬
All his cabinet doors are upside down… 🫨
this sucks and will need more work than just cleaning it