Restoration super subwoofer SONY 1000W // DIY the coolest subwoofer box
Vložit
- čas přidán 26. 11. 2022
- Thanks for watching, subscribe & share!
Restoration super subwoofer SONY 1000W // DIY the coolest subwoofer box
#mr_electricity #restoration #speakers
► Subscribe to channel: / mrelectricity1111
Please give me your opinion. Where is not good Let me improve.
------------------------------------------
Thank you for watching the video. please support me. Thanks you very much. love everyone.
Parabéns, excelente trabalho!
Great job. Only tip I would give is to secure the speaker wire terminals on the subwoofers better to where they are not moving. Thanks for the video
I love seeing trash to treasure vidios and love to see things rebuilt and reused! Way to go! I'd love to hear them. It seems everyone only knows to throw away and get new but now a days built quality isn't worth a crap with most items, so yeah, wishing certain things
В пр роз
Muito bom som de qualidade essas caixas.
I'm truly impressed! Good work!
Niceley done. I didn't know those old sony's had a dual spider.
Those are excellent subs. Had them wired to a taramps 3000HD and it was freakin incredible. They never blew up and I drove them hard. Got them in a elite 2x12 box in my van now parralelled to 2 ohm and a small 250 watt amp and they still pound like nuts.
了~
、!
Sure. Coz real work power is 300W and PEAK power is 1100W just peak power!
Hmm ? And where did you get a new membrane, because the old one was torn?
It's a rebuild kit. You buy it new. DiY cheaper than buying new subs. Also good way to design better subs from old junk.
Quedaron espectaculares.
This was incredibly satisfying to watch.
thank you
They look pretty damn good 👍
Man I wish I had those skills
Te quedaron muy bonitas
That poor little green router still takin the abuse. Love it
I am amazed that you can always get the replacement parts! As always, very well done.
Industry and concert poroducts get replacements, consumer stuff not so much
Wow totally rebuilding where u get the replacement pieces u literally destroyed the original parts it’s all new 🤔
One of the real restoration video🙏👍👌
Totally impressed
Excellent
Supersatisfactorio Gracias
Now I know what I should have been learning in school maybe I would have my own business now.
kawał pięknej pracy
Muito Bom!
Nice reimagining, but:
1. The real working power is 300 W - attentive viewers saw this on their own sticker. This is the true maximum operating power at which the speakers will work and not burn out!
2. The boxes are too small for such speakers and you can't get a normal sound from them!
3. Painting for rust is a bad idea!
Good luck! (=
Your cable too small will you...?
This subwoofer need 4 mm cable...!
I love this product ❤
what is that liquid/solvent you are using to remove the cones / diaphragms etc ?
Bravo suonatore vufer bassi ❤👍✔️
Bad ass man did a great job
SONY MAKES THEYRE OWN SUBWOOFERS, I HAD A PAIR, 100 WATTS EACH, MATCHED WITH MINI SPEAKERS, SOUNDED FANTASTIC, COULD SHAKE THE ROOF *
Класса получилось продолжай также делать!!!
Amazing restoration 🎉🎉
hello what is the name of liquid you put to tear off the glue in the speakers?
A wire wheel would be so much easier than the sand paper. Great job though 👏
Evaporust
This was really cool! Thanks!
Nice 👌 👍
2:02 Hey, can you please share what's this liquid called?? Where we can get it.. please
Resultado maravilhoso!
Excelente vídeo tutorial, lo que si recomiendo es, envovinarla bien. Por que sonaba con Rose, lo que significa que el centro magnético donde se coloca la bobina, estaba sucio en el momento de amarlo
Exactamente, yo por empezar corregiría muchas cosas, en la canasta del parlante ni siquiera le saco bien el óxido que quedó después de lijar y pinto sobre eso, en un tiempo se le despega el centrador y el cono juntos. El parlante de fabrica trajo doble centrador y el solamente puso uno pudiendo haber aprovechado el otro espacio y ponerle los dos, otra es que la bobina se queda muy chica para lo que es la suspención, y ya siendo un poquito más detallista, el cubre polvos ni siquiera está bien en el centro
Nice job and video thanks for sharing.
recomendo um par de JVC full range 3" pra complementar as frequencias medias e agudas do sistema
These came out awesome 👍
Gran trabajo pero para hacer los videos menos pesados creo que no es necesario mostrar como se lijan una por una cada una de las piezas de madera (minuto 7:18)
Thanks :) maybe I can have decent speakers now that I can repair my own.
just buy some 8inch DS18s or SKARs
Супер сабвуфер Сони на 50вт
Скотч и упаковка дороже чем то что внутри :)
Согласен) ну там не 50w там рмс 300где то пик 600w
Saludos de México
Thank you for leaving in the sound of the router at 11:25 - 13:30
Bravissimo complimenti ❤️
As someone that has re-coned a great many woofers, 1,000 watt woofers do not come with stamped metal frames. It would be cast metal.
Those vents under the bottom spider should be covered with cloth to prevent dust from constantly getting drawn into the magnet around the voice coil. If Sony didn't have air filters on those then it is a design flaw.
Skar SVR and many other 1000- 2000 watt plus woofers come with stamped metal baskets.
Nominal power is just 300W.
@@pdr5926 svr not sdr
Very nice bro 👍
Hello, love your videos. What is the glue release liquid you use?
Very good job this music is great 👍👍
Top!!!!!!!!🤗🤗🤗🤗🤗
Amazing yr 😍
Tight 👍🏾
19:30,除锈,可以放入热水中,加柠檬酸(很便宜),煮沸
Respect powerful now it's time to bump
19:27 I would have used a wire wheel on an angle grinder to that rust instead of sandpaper, It would have came out a whole lot nicer because you would have gotten rid of 100% of the rust down to the bare metal like you should have And then you should have primed the metal before you sprayed it. other than all that it came out pretty good.
though I am a little bit disappointed that they are no longer Sony Xplōde subwoofers anymore😢
Maybe 2 in 1 paint, or epoxy.
wow que lidos esos sorround krenwood no sabia que existian saludos desde argentina
Nice❤👍
Bro Iam from India I like very much your restoration give you a big like and all the best .
Good job brother 👍
Bravo a terrific job 👍
Jozz❤
Nicely done
I like the paint colour of the driver.
❤❤👍👍
Job well done, keep it up
Amazing
How did you get the T/S parameters to make the correct size box?
Better then they originally were lol
Any idea on where I can get parts to recone subs that are 2.5 inch voice coil and under?
You forgot to doubled the speaker damper to make a hard bass.
Very nice work broo
Good job bro.i think you can make box nice finished with putty
ASMR repair😊
Nice 👍👌 02/02/2023 🇮🇳
Super!!!
Ja com vocês no CZcams é rápido e prático, nem esquenta os componentes de tão rápido é a solda
Very nice
4:30 brother what's that solution you're using? please let us know, subscribed
X2
Veramente bravi
They look 10x better than the original Sony
Nicht wirklich.
Doesn't look better than the original pentagonal cones. Just looks like a generic chinese market subwoofer now.
@@wmp0074 The Sony subs did have dual spiders and we’re probably built better but my original comment had nothing to do with performance just the looks
@@K-Effect I was just giving my opinion that the original cone looks better because of it's unique design compared to the round cone and thick surround. I did post another comment about not using 2 spiders but that wasn't direct towards you. Nobody is wrong though. You think it looks better and I don't. Just two different opinions :P
@@wmp0074 I completely understand. I never met any disrespect, I can come across very blunt but I really don’t mean too
Good job Guy ;oP
It would really be a plus if in the description you write the names of the products used and their references :o)
Your Vlog would thus also become a tutorial ... ;o)
Jabarjast
Hello a.e cũng có loa rời như thế này mong a đóng lại e có được không
Круто , подсоединение только , у меня денамик 250 ват там на пружинках
Hay quá anh, anh có thể làm cho mình 1 vỏ thùng sub thô không?
What's the glue you use for fix the speaker and stick the spider
Why only use one spider? The bottom one makes the voice coil more stabilized. Former will probably jump gap now.
The technical term is spider for the piece that supports the voice coil.
@@frankorandle Corrected, thanks! Now answer the question. lol
Excellent work. Just wondering, what is the liquid you are using to release the speaker from the base? It seems to work fantastic. Thank you.
Растворитель
Something that is likely illegal in the green ass state of California I reside in unfortunately.
@@low_hash que tipo de solvente? Eu já téntei todos os tipos de solventes e nenhum dá esse resultado
Também tenho essa dúvida
Is it a liquid that you may find at a gas station ? 😀
If u use a standard paint roller you could save that spary paint and do it all in one step
Where did you get the Replacement Parts Kit From ?
what are the drivers you have put on the top ? any links to them please?
0o0
Soni Main Japan 👍
Tenho um igual a esse
Live you videos brother ,what's that stuff you use in the bottle?
Can you make this 2 subwoofer turn To isorabic subwoofer?
You can make any two subwoofers isobaric. The top woofer has to be wired reverse polarity and there's a spacer in between them
❤ great
wow puedes especificar que tipos de pegamentos usas??
Where can I get that black spray can ?