@@cj393 Doubt that will happen. His entire life and family is in Colorado. Besides, Florida has tons of performance shops all over the place. PFI has a great market in the Denver area without a ton of competition. If he's anything like me, the heat, tourists, urban sprawl, and flatness of Florida makes it intolerable long-term.
MAKE SURE IT CAME WITH THE UPGRADED ARP BOLTS THAT BOLTS THROUGH THE VTEC SOLENOID THAT HOLDS THE MAIN BRACKET OF THE SUPERCHARGER BECAUSE THE OLDER STYLE HARDWARE BREAK AFTER TIME
Upgrade the retainer/keeper to the AP2 f22c1s or even titanium ones. The stock f20c ones are known to fail and potentially drop a valve because of the higher revving. Planning on doing this on the long run for my girls s2k so just dropping my 2 cents into this 🙌🏼🙌🏼
badass exhaust and super nice supercharger kit, yall are really doing this one right! Painting the valve cover would help a ton with the engine bay looks too
@@Matty.Hill_87 yea, when you see LHT do dyno runs on stock S2's, they are in the Florida, but then again they are in Florida, where the humidity is high and its always hot, and they get around 205. Kinda wanna see hp rating at pfi and then see how much more hp it would be at sea level
The bloopers at the end had dying 😅😂 That's a super clean install for thay supercharger 👌. Looking forward to seeing what power it makes now. I wish I was in America I would definitely be entering the competition.
Should do a blooper reel after episodes. Not all. But some. It gives a finer look at what content creators deal with/all the video content that don’t make it to the episode normally.
Nice. My buddy had a supercharged s2000 that used to eat porches. He turned it into a full race scca car and ended up going back to na because the supercharger was too much for the courses. Such a good setup with that supercharger though.
I had an s2k with an sos sc kit, badass clutch, kwv3, oem hardtop, and bbk among other supporting mods when I was stationed in Germany. It was good fun on the autobahn and Nurburgring but was still pretty flat torque wise vs a turbo setup
Definitely gonna grab a hoodie or something have wanted an s2000 ever since I saw Johnny Tran give jesse the dust in that black s2000 I was 11 back then 😂😂😂 thanks for the opportunity kyle!!!! Also whoever said leave it stock really? Live a little!!! 😂😂😂
Dam your shipping is very reasonable, congratulations on that, how about adding a knife to the collection ? maybe a drink cup (yeti type) with a top so it won’t spill when doing donuts 😊, keep up the fantastic job 🔥🔥🔥🔥🔥🔥🔥🔥🔥
I had a buddy who had an EK Civic hatch (like Kyle's), but he had it painted Tahitian Green Pearl, it had a freshly fully built JDM B16A, and it had a Kraftwerks supercharger kit. It was really surprising. My EJ8 EK coupe had a fully built LSVTEC turbo that made 709 whp, and every time I would take mine to the strip it would have some stupid issue like a TPS malfunction or a fuel pressure issue. His hatch made 356 whp with the supercharger and that's a damn good feat for a B16A.
I just ordered a novi 1500 for my Mercedes ls3 swapped c280. Looking for 650 whp. First centri supercharger for me also. Good stuff I’ll be watching this closely.
I really feel like you guys are a big enough channel to upload at 4k. Love your guys videos but CZcams 1080p mid and your iPhone can do it. On the road when upload speed sucks sure but at home you guys could do it 👍Love the s2000 gonna cop me a entry fr.
First time commenting. But just wanted to say,Me and my son have been watching your show since the beginning. Have to say it's favorite channel. Love watching you guy's.
Action clutch Break-in Requirements 500 street miles / Keep RPM’s under 4500, no more than half-throttle, no boost (if applicable). Proper break-in is required in order to retain product warranty, ensure longevity and holding capacity
YES! Throw a bigger bottom pulley on that and turn up the boost to 11psi. A smaller supercharger pulley would only add to the fun, put a blow off as well.
This is my favorite kit for the s2000. I've installed probably 100 of these on customers cars. I'm gonna have to buy some merch to maybe get one myself.
Would of been great to see how much power the Skunk Works exhaust added over stock when you laid down the initial figures Kyle..... but great work by the team!!!🙂🙂
Those superchargers are a hit or miss so if you miss get at them quick because they'll only warranty for a year or two the one we did was bad out the box. Symptoms was it was very difficult to start up
Definitely should of resurfaced the flywheel and did the AP2 spring and retainer swap look up LHT PERFORMANCE they jist put up yet ANOTHER video on how bad the AP1 Retainers are you dont want a winner to drop a valve ATLEAST LOOK INTO IT just looking out for my boys
As much as I love Florida content it's always very nostalgic to see the PFI and Boostedboiz working together
Brent needs to move to Florida.
Feels like home.
Together*
@@cj393 Doubt that will happen. His entire life and family is in Colorado. Besides, Florida has tons of performance shops all over the place. PFI has a great market in the Denver area without a ton of competition. If he's anything like me, the heat, tourists, urban sprawl, and flatness of Florida makes it intolerable long-term.
For sure
MAKE SURE IT CAME WITH THE UPGRADED ARP BOLTS THAT BOLTS THROUGH THE VTEC SOLENOID THAT HOLDS THE MAIN BRACKET OF THE SUPERCHARGER BECAUSE THE OLDER STYLE HARDWARE BREAK AFTER TIME
bumping this bc its important they see this
you'd thinking these guys would know this after owning a "few" high horse Honda's, not saying your comment isn't valid but im sure they know.
@@SlowSTEN well they've never done a supercharger before and the bolts in question are specific to this kit
oop
@@SlowSTEN yeah i doubt they know
I love seeing Jamies mischievious smile while holding the nitrous bottle. Shit had me dying
Please start putting more bloopers at the end like that. 😂😂😂
Or make a monthly spot at the end of a video with your most ridiculous slip ups 😂😂
That would deff b a great idea seeing the bloopers! 😂😂
I love when people throw in good bloopers.
I love Wyatt how he grabbed the instructions and said let me help you with that.😂💯🔧🚗🏁®
Holy shit Kyle's doing a build with a full exhaust. That's rare.😂😂😂
Upgrade the retainer/keeper to the AP2 f22c1s or even titanium ones. The stock f20c ones are known to fail and potentially drop a valve because of the higher revving.
Planning on doing this on the long run for my girls s2k so just dropping my 2 cents into this 🙌🏼🙌🏼
The rotrex kit is probably one of the better options for someone wanting to keep the rest of the car stock.
badass exhaust and super nice supercharger kit, yall are really doing this one right! Painting the valve cover would help a ton with the engine bay looks too
I miss the leopard print one on the angry panda Aka mr2
At that elevation, i think everyone was super surprised at those stock numbers
I hadn't even considered that, thise numbers were crazy when you actually think about it
@@Matty.Hill_87 yea, when you see LHT do dyno runs on stock S2's, they are in the Florida, but then again they are in Florida, where the humidity is high and its always hot, and they get around 205. Kinda wanna see hp rating at pfi and then see how much more hp it would be at sea level
Pretty sure Brents dyno is atmospherically adjusted. It reports what the engine would be making at sea level.
@@Hman9876 is that a thing? I never knew that was possible
@@Hman9876 I don't so. If it was, don't think he would have been that surprised
Love the bloopers at the end. Please keep adding them!
Anyone here watch all the LHT videos? Just keep thinking about what John does on every s2000 kit he installs. 😆 🤣
Which is?
Should've got James out there to control the nitrous, could've taught Jamie how to get the big results 😂😂
James would have sent a Honda piston to the space station 😂😂
@@Matty.Hill_87 hahaha yea too true
Best video I've seen from you guys in a long time.
I've been watching for 4 years or so...
Keep up the great content guys!
That supercharger kit looks slick!
Also, love the blooper reel at the end hehe.
s2k is going crazy! love to see it. love the little bloopers at the end as well. keep up the good work boiz
The bloopers at the end had dying 😅😂
That's a super clean install for thay supercharger 👌. Looking forward to seeing what power it makes now. I wish I was in America I would definitely be entering the competition.
The S2000 is such an awesome platform to build off
I love the blooper I hope you could add more later on in you videos keep up that hard work love seeing you progress.
21:02 tests the fit, when both hose clamps are on the Air Filter side... Good job man 🤣
What!! Who wouldn’t want to boost that baby !! Love the fact you followed through with clutch to keep it gtg for a while . So dope
Best Car Content Channel By Far!!! Keep It Up Boiz Love To See All The OGs
Jamie with that nitrous made me really LOL💯🔧🚗🏁®
So glad you guys are fixing and tuning 🙌
Wyatt is the man brother you do great work on everything you do you and the team make what I wanna have in my life
Lmao, love the bloopers at the end & how much fun you guys have!
Should do a blooper reel after episodes. Not all. But some. It gives a finer look at what content creators deal with/all the video content that don’t make it to the episode normally.
Hell yeah I called it 🤙 I knew a supercharger would be sick on the S2000. 🔥 work as usual fellas 👌
Nice. My buddy had a supercharged s2000 that used to eat porches. He turned it into a full race scca car and ended up going back to na because the supercharger was too much for the courses. Such a good setup with that supercharger though.
ive been wating for a supercharged build and this def didnt let me down!
Very cool little build. Probably going to be a super fun driver
It’s crazy how Brent still gets his hands dirty. Gotta respect the guy doing what he loves
Looking so nice , great job 🔥🔥🔥🔥🔥
Love this content back in CO! Just seems more natural having the Kyle back in the shop
Wicked!!! Kyle Changing it up!!! Lets Go!!!!!!!
I had an s2k with an sos sc kit, badass clutch, kwv3, oem hardtop, and bbk among other supporting mods when I was stationed in Germany. It was good fun on the autobahn and Nurburgring but was still pretty flat torque wise vs a turbo setup
Man I love seeing Brent in the videos, he's just such a great character to have around
I like how clean the kit looks 👍
After my crazy horrible days at work l watch you and all the other bozs and l smile ✌️
Definitely gonna grab a hoodie or something have wanted an s2000 ever since I saw Johnny Tran give jesse the dust in that black s2000 I was 11 back then 😂😂😂 thanks for the opportunity kyle!!!! Also whoever said leave it stock really? Live a little!!! 😂😂😂
Dam your shipping is very reasonable, congratulations on that, how about adding a knife to the collection ? maybe a drink cup (yeti type) with a top so it won’t spill when doing donuts 😊, keep up the fantastic job 🔥🔥🔥🔥🔥🔥🔥🔥🔥
I had a buddy who had an EK Civic hatch (like Kyle's), but he had it painted Tahitian Green Pearl, it had a freshly fully built JDM B16A, and it had a Kraftwerks supercharger kit. It was really surprising. My EJ8 EK coupe had a fully built LSVTEC turbo that made 709 whp, and every time I would take mine to the strip it would have some stupid issue like a TPS malfunction or a fuel pressure issue. His hatch made 356 whp with the supercharger and that's a damn good feat for a B16A.
Please do a roots style supercharger for the boiz 🎉
Shoot even that stock exhaust manifold looked pretty nice. Better than a cast log manifold
add a flex fuel sensor ,and tune for for both so whoever wins it can run it regardless of fuel availability
Keep up the awesome work!
Need more bloopers that was hilarious lol
The only bad thing about these kits is the price but what you get is good quality. Love my rotrex
Jamie and Jackstand. Keep the bottle out of their hands!
The bloopers at the end was a perfect touch
You need to wire in a 3 bar map sensor and use the map sensor on the Haltech for ambient air pressure. It will help with altitude changes.
I use a haltech on my 4G69, only using the internal map sensor and have 0 issues going from 1500ft to 6000ft 🤷
Man you guys making my dream right here 🔥
I'm seriously surprised that you Honda boys don't have weighted sockets for those crank bolts. Love PFI/BOOSTED content.
Good job guys loved the ending lol
Throwing all the parts on the s2000. Love it
As an Aussie Love to see more Haltech ECU's being used!
I just ordered a novi 1500 for my Mercedes ls3 swapped c280. Looking for 650 whp. First centri supercharger for me also. Good stuff I’ll be watching this closely.
What a tease. Looking forward to the dyno session.
Woah! Kyle installed everything in one video that’s unbelievable! Where’s the 5 part intercooler days gone? 🤣
Love seeing brent so happy to just help you out with anything real love right there ❤
im loving those out takes !!
love the bloopers at the end
Those ap1 retainers are known to crack. I’d recommend changing them to ap2 retainers/keepers for extra insurance
Man I would really like to watch another boostedboiz/pfi vs cleetus crew build off!!!!
I really feel like you guys are a big enough channel to upload at 4k. Love your guys videos but CZcams 1080p mid and your iPhone can do it. On the road when upload speed sucks sure but at home you guys could do it 👍Love the s2000 gonna cop me a entry fr.
You should add bloopers to the end of every video 😂😂😂
I might need to buy more merch after seeing the full skunk2 exhaust and header and haltec
12:53 For the price of that kit and what seems to be ease of installation, it seems like a real real good price for that whole kit.
Your giveaways never disappoint
First time commenting. But just wanted to say,Me and my son have been watching your show since the beginning. Have to say it's favorite channel. Love watching you guy's.
Action clutch Break-in Requirements
500 street miles / Keep RPM’s under 4500, no more than half-throttle, no boost (if applicable).
Proper break-in is required in order to retain product warranty, ensure longevity and holding capacity
We need more bloopers 😂
Any video with the old gang is Golden! Insane vide with everyone.
Keep pumpin the trans jack lol 😅😂😂😂😂 much love to this grohp you all work well together
Lmao yall are such an also me group of ppl I need yall in my life
Can’t wait for the next S2K
video !!!
I wish us Canadians had a chance to win this! Such an awesome giveaway car , really clean. Keep up the great content!
Awesome work that kraft box is beaten up I was expecting alot of broken pieces in there😂
YES! Throw a bigger bottom pulley on that and turn up the boost to 11psi. A smaller supercharger pulley would only add to the fun, put a blow off as well.
This is my favorite kit for the s2000. I've installed probably 100 of these on customers cars. I'm gonna have to buy some merch to maybe get one myself.
Would of been great to see how much power the Skunk Works exhaust added over stock when you laid down the initial figures Kyle..... but great work by the team!!!🙂🙂
crazy chris racing on point with the hp guess
If this works good please do it on the jet boat too!!
Nice to see a Supercharger around might supercharge my daily
Kyle, after Jaime's nitrous misting: "JAIME?!?!"
Jaime all smiles, looking around: "What?"
Hopefully the kit is reliable.. heard lots of issues with this setup
Dang. Get you a man as strong as Witt cranking on that bolt. 😂😂
Those superchargers are a hit or miss so if you miss get at them quick because they'll only warranty for a year or two the one we did was bad out the box. Symptoms was it was very difficult to start up
Nice for a stock i'm happy...love to own one👍👍👍
Im liking the end of video bloopers reel. Make that a new outro trend :D
soooo happy to see so many SRT-4's in one place
hey bro what your doing with giveaways is really cool, think you could do something for your loyal international viewers? love from Australia bro
8:28 Cool S in the background... cool Supercharger in the foreground
Throtl and Kyle building charged S2ks....we need a drag race
The smile after the quick 2 step hit
Love the bloopers
This is going to be such a nice little ripper.
Who ever wins this car, is one lucky bastard!!
Definitely should of resurfaced the flywheel and did the AP2 spring and retainer swap look up LHT PERFORMANCE they jist put up yet ANOTHER video on how bad the AP1 Retainers are you dont want a winner to drop a valve ATLEAST LOOK INTO IT just looking out for my boys
Just a heads up ; The AC compressor shuts off at WOT so you don’t necessarily have to shut it off…. But yeah I probably would too lol
Listen to you guys…”that ain’t stock! It’s got da kizzle nizzle!” 😂😂😂