@@dl420pwnage You can have a powerful grip but still be gentle, its just by experience and precision that you can be both soft and unyielding. I'd accidentally crush the snake if I tried that since my hands twitch, all my muscles twitch too much when I try to hold position XD
Holy shit dude you are going full force into building some new big boy race cars. This and the nsx are going to take this channel to a whole nother level and I can't wait 👏👏👏
the one to the right of their house(looking from the street) isn't but Kyle said he usually messages them when their home if he's going to do something like that.
Wildlife with Kyle. You'll meet Trouser, Larry and Hooter. Here in NZ we don't get snakes. We have Morepork (native owl) and plenty of lizards. Love the content, can't wait to see the tube-frame Civic ripping.
Been watching this channel since the CO garage days with the hatch. It’s been amazing to see this progression and it just keeps getting better. Shout out to Trouser’s fam!
I really enjoyed the videos while in Colorado, it brings back memories from the hatch and wago days... Brent , goofy and Jamie are good company , you couldn't ask for a better crew of guys
Would be sick to see a fully built j series with a big ol turbski sticking threw the bumper turned up to the moon after testing it of course and see what it would do. 1200hp+ j series motor would bad ass
Just wanted to give a big shout out to Wyatt so proud of you brother. Your truck did great for being the 1st time out. I'm sure you're gonna get it Dial in and kick butt Next time.
Let's go another video it's always a good day when the boostedboiz drop a video, I been watching for years since the og house and when it was just the hatch and then you got wago, keep up the hard work and grind can't see what else you accomplish 💯🔥
From where that axle broke I would say it was under torqued axle nuts. When the S2ks first came out it was a super common issue. Little bit of play and a good clutch kick and shes gone. Im impressed your diff didn't go first!
Watch him surprise us all with an RB. I dont think he has tons of knowledge with those or JZs but he is super smart and picks up on things easy it seems. Gonna be good for sure. Please no ls..
@@daveysixsixsix1300 Actually he said a couple. I somewhat doubt a J series. There’s just more parts and support for the K. I’m thinking 2jz, I believe Kyle said a while back about wanting to do something with a 2j.
I've only been subscribed for a few months but I'm more excited about this tube chassis rear wheel drive Civic than any other build so far! This is going to be sick
Imagine what a 900 lbs chassis with the correct high power drive train which produces 1800 wHP, with a proper suspension, full safety equipment would achieve, perform with a total 1800 lbs vehicle ??!! Now that is what this full tube chassis Cive could become. Be Innovative, Successful, Creative, Imgaintitive, perhaps employ some proper engineering experts too ? @BoostedBoiz; All The Best, Sincerely
You positive it a 2JZ going in it ? That was what I initially thought after he pulled the plug on the LS but now I’m not so sure . I could have missed something but I didn’t see him purchase a or anything with a 2JZ I don’t think and I also haven’t seen him or anyone else building a 2 JZ mtr for them ? Where is the Tesla at ? I’m not so sure he isn’t going to use it ! He keeps making comments about things we would expect like the oil can comment from Wyatt and the engine, power plant comments the big turbo you know we are going to put on it comment and the way they are smiling. He bought that Tesla for a project and right after he bought it he changed his mind ( or told us he changed his mind ) about the LS . He said the Tesla ( if it could even be done ) was going to look and be completely different and he has definitely been in contact with Rich who has already done a Tesla swap both ways …. Just a thought
@@jasonsparshott7208 Jason Parshott, clearly You have some interesting possibilities presented within Your comments. A. Clearly Kyle stated "..a couple more cylinders..." for this Civic Tube chassis a. => thus a minimum of 6 cylinders b. not necessarily limited to 6 cylinders c. not necessarily a I-6 with 6; perhaps V-6 as "Bully" & others with Honda, Toyota, Mitsubishi, others d. certainly not electric, though if imaginative could have a hybrid arrangement e. also could be, with imagination a mid-engine RWD or with two engines, AWD - perhaps two Honda K-, B- or other series, Mitsubishi f. "cylinders" clearly also indicates such engines with cylinders, thus not rotary or other engine types B. Now Kyle has two clearly "full race car" tubular frame vehicles, along with the plans for the working Tesla Plaid Model S and other 'scrap frame" Plaid, which Kyle stated he plans to use for, with, as developmental for his ideas with the functional Plaid. C. there are actually numbers ideas, variations, possibilities to do, achieve with this Civic tubular chassis; just 900 lbs. 1. These depend upon personal ideas, imagination, visualization, conceptualization, development, innovation, abilities, capabilities, desire, 2. It seems from these three vehicles [NSX, Civic tube frame & Tesla Plaid], Kyle seems to have some imaginative ideas which he is more willing to proceed with currently. 3. We will see what his ideas, imagination, concepts are leading to developing and producing 4. Am hoping that Kyle & Wyatt will proceed with some actually amazing perhaps innovating implementations.; We Will See as they reveal each of them 5. My imagination, ideas, concepts, principles include many opportunities. All The Best, Sincerely
@@newtonfirefly3584 Kyle can say anything… him saying more cylinders could just possibly be him throwing everyone off … that’s my point in mentioning him saying more cylinders . I’m not saying I’m correct but there has been every internal combustion engine swap preformed… a 2 JZ swap is played out so is a LS even a Barra the 4.2 liter GM I6 vortech is even a fairly popular swap … a Tesla swap is off the wall and has not been done often . He bought the Tesla for a build …. Just think about it . I’m not a idiot and I don’t know what he is doing but my thoughts are just as much of a possibility as any other build …. If you take every word he says literally obviously it’s not a electric swap but … he can say anything he wants just like you did with your comment back to me trying to imply I’m a idiot … Sincerely Jason Sparshott ( not Parshott)
@@newtonfirefly3584 no offense man but listen carefully to the way he sounds in this video when talking about the “ more cylinder’s ) he sounds to me to be using sarcasm in a joking manner.. just my thoughts I understand the possibilities are limitless …
Tube Chassis Civic is going to be awesome no matter what engine you stick in her, but at a guess I'm going to say you somehow got a Steve Morris SMX for it. That would be so epic. Either way I'm looking forward to seeing it rip a 6 second pass and dominating the drag and drive events next year. PS that's your getter done by mark.
I just got my "Caint The Page" shirt, and my "Smoke In the Pipe" shirts ordered. Now lets hope that gets me an S2000 and a reason to drive down to Florida to get it!
@@keithstubbs4473 Yeah if he literally only meant two more cylinders when he said a couple more cylinders lol we shall see the 2J was definitely my first guess.
If you want the car to stay light, I think j32a2, or a aluminum LY6. Both weigh roughly about the same. K-series is great but v6 or v8 just got better displacement and less stress on each rods and pistons.
Finally...ive been waiting for this build for a darn minute!!! When you revealed the new NSX I though about this car but for some reason i thought it was a AWD chassis but im so damn stoked bro.
8:00 After those big miles, worth giving the tow rigs some love; oil change, filters if needed etc and fix any little things before they become big expensive things...🖖
I think its a J or a 2J because in a video a while back they were talking about the class they wanted to race it in and it had to be either foreign motor as in Japan or a Honda motor. The way they had that oil pan sitting im worried it might be a 2J probably built by Victor over at Induction Performance. That would be cool and all but a J series would be cooler imho.
Would love to see a J-Series V6 with something like a 86mm twin scroll turbo, run each bank of cylinders into each side to help with boost loss between gear shifts. Down side to a J-Series is there isn't the same support for the platform as say the B-Series/K-Series. Sourcing a spicy transmission would be key to reliability with getting the power down! spreading a 1000+ ponies across 6 cylinders as opposed to 4 would also relieve engine stresses for further reliability ;)
Them plaques are sick!! Good shout on making them, I'll order 1 to my brothers house when I'm in Florida in September...... That way i don't pay post and import tax to italy😊
Just wanted to say I'm a mustang junkie and I have 4 of them. I watch for the awesome content..don't get it wrong I'm a mechanic and car guy and don't hate on no anybody 's cars we all have different tastes.. keep up the awesome content guys
Sure I don't hafta say it but do all the safety equipment in the civic/nsx builds and don't forget the fire suppression on em because that has been the one missing thing that shouldn't be on the up coming builds. I may have to take a ride back home to see ya run em. As soon as I mo Ed to north fl yall move to Seffner so ill be back for sure
I’m in Canada dawg British Columbia to be exact, once the giveaways can be won by me I’ll be getting myself tons of entry’s if the cars keep being as cool as this!
I hope they use some form of an RB engine. A 2J or 1J would be sick too. And there's no freaking way that Kyle weighs 170! I'm going to guess 150 soaking wet. Lol all jokes aside, You guys are killing it! Keep up the great work fellas! Oh, I bought a straw hat to try and win that S2000. I unfortunately live in Cali but I got a guy that will smog it for me 🤫
would be awesome if the new engine was an RB30 like out in auz would give a lot of competitors a run for its money but this would be in a perfect world and unique as its not your typical 2jz
With that chassis you'd expect something huge HP is going in it so a straight 6 of some pedigree or an LS. I6 tends to be a tall and long configuration tho which doesn't look like a good fit
im so glad you let Hayden handle the NSX so you could still do this build at the same time!
Hayden’s a beast tho.. definitely the man for the job
Brent is such a kind soul. Can just tell how gentle he can be by how he was with that snake
Don't be fooled. Brent had the death grip on that thing lol.
@@dl420pwnage You can have a powerful grip but still be gentle, its just by experience and precision that you can be both soft and unyielding. I'd accidentally crush the snake if I tried that since my hands twitch, all my muscles twitch too much when I try to hold position XD
Off camera He ate it
What a homophobic observation from a snowflake 😅 the world today is full of emotional simps all up in their feelings on just about anything
@@General_Loco 😂 that’s terrible
Holy shit dude you are going full force into building some new big boy race cars. This and the nsx are going to take this channel to a whole nother level and I can't wait 👏👏👏
I don’t think I’ve ever been more excited to see a project start on any channel I watch. This build is going to be insane! Can’t wait!
When Kyle said it's gonna have "a couple extra cylinders" I immediately assumed that meant it's getting a 2JZ
Or a Honda J series. But im with you though it needs to be a 2JZ
Anything but an LS
2JZ was the first thing that came to mind for me as well
It is, the oil pan matches.
That oil pan definitely looked like a 2jz
Neighbors must appreciate a good axel break in 😂
His neighbors are airboat and car guys. I don't think they mind.
@@captiancrafterhe might be new haha
Axle
Great grandpa always taught me they’ll get over it and if not do something to piss them off even more so they get the point
the one to the right of their house(looking from the street) isn't but Kyle said he usually messages them when their home if he's going to do something like that.
I still say adding Wyatt diesel was best thing for y'all. Brings so much more to your channel. You done ls, hondas, now some Diesel
Wildlife with Kyle.
You'll meet Trouser, Larry and Hooter.
Here in NZ we don't get snakes. We have Morepork (native owl) and plenty of lizards.
Love the content, can't wait to see the tube-frame Civic ripping.
Been watching this channel since the CO garage days with the hatch. It’s been amazing to see this progression and it just keeps getting better. Shout out to Trouser’s fam!
Lol watching Kyle turn to an ignorant dick? Same though
I want to see a Harbor Freight Predator motor into the tube chassis car. 5hp of fury
Quat predator civic imagine dusting everyone
Sounds more interesting than a ls that's for sure
World's fastest Predator?
100% more interesting than an LS swap!
lol some real Robot Cantina vibes
I won’t skip the merch plug for you guys. I respect and appreciate all the great content. Keep on keep being fluffin awesome!!
Watch tons of movies on long drives. The time melts by so dang quick. Glad you made it back safe, and got the S2000 banging gears again
hanging out with cooper all the time, probably going to be a 2jz
LS
@@dustinleebladesmith9135 nah
@@dustinleebladesmith9135 It was a 2J oil pan on the ground...
@@dustinleebladesmith9135 original plan was an LS but he said he changed his mind
Hope its a rb or a 2jz or sr
Love seeing boostedboiz Emilio back on the channel
I really enjoyed the videos while in Colorado, it brings back memories from the hatch and wago days... Brent , goofy and Jamie are good company , you couldn't ask for a better crew of guys
Man just the vibes of everyone being together again. Such a great family ❤️ from 🇦🇺
Ps: 3SGTE engine for the tube civic. Bit of a switch up 🤙🏻
Yeah Kyle and wyatt you guys make my day every time you post a new video big love from the uk 🇬🇧 👊👊👊
looking forward to this build and the nsx. can't wait to see them both done
You guys admiring a beefy shaft was golden.
Would be sick to see a fully built j series with a big ol turbski sticking threw the bumper turned up to the moon after testing it of course and see what it would do. 1200hp+ j series motor would bad ass
Here watching from Jamaica🇯🇲🇯🇲🇯🇲
To the world....
Ochi massive a watch too
Big up yardy 🇯🇲🇺🇸we out here
Sanka ya dead Yeah man
@@grumpyoldman9805wha gwan nuh star?!
Just wanted to give a big shout out to Wyatt so proud of you brother. Your truck did great for being the 1st time out. I'm sure you're gonna get it Dial in and kick butt Next time.
On your civic Rwd project car, make sure you add a bar from just behind the front top strut mount down to the lower front frame rail.
Hats off to Wyatt for the valve cover repair 🤜💯🤛
always love to support, bout ready to hang the MR2 poster once i get this frame in! keep killin it yall, been rockin wit yall since 2017
Let's go another video it's always a good day when the boostedboiz drop a video, I been watching for years since the og house and when it was just the hatch and then you got wago, keep up the hard work and grind can't see what else you accomplish 💯🔥
Kudos to you for taking on such an ambitious project!
From where that axle broke I would say it was under torqued axle nuts. When the S2ks first came out it was a super common issue. Little bit of play and a good clutch kick and shes gone. Im impressed your diff didn't go first!
Oil pan on the ground is definitely for a 2jz!! Gonna be super rad to see once all said an done!!!
Sure looks like it.
Couple extra cylinders.... Are we about to see a J Series again? 🤔
Or a 2jz
Neither I don’t think ! Everyone is saying 2JZ but that’s what the want . Where is the Tesla ….??
Hell yea guys, finally. I've been waiting to see you guys start on this mean machine.
Watch him surprise us all with an RB. I dont think he has tons of knowledge with those or JZs but he is super smart and picks up on things easy it seems. Gonna be good for sure. Please no ls..
I would love to see 4 rotor but I’m cool with the 2jz u got 😊
I was hoping for 3 rotors but he said cylinders.
Better be a 2j going in that thing!
V8
Or j series he did say a few extra cylinders I'm just hoping it ain't no boring ls belly button motor
steve morris smx
@@daveysixsixsix1300 Actually he said a couple. I somewhat doubt a J series. There’s just more parts and support for the K. I’m thinking 2jz, I believe Kyle said a while back about wanting to do something with a 2j.
@@donaldchapman4312the oil pan was sitting right there. It’s a 2JZ
I've only been subscribed for a few months but I'm more excited about this tube chassis rear wheel drive Civic than any other build so far! This is going to be sick
You need a cp4 disaster kit in that f450!! It will save you so much money and time man!! Love the videos and how far you’ve came!!
It will void the warranty
I think a built j series would be sick
i hope the civic gets a steve morris big block
I second that lol
I third that
SMX the World!
good to see Emelio & kyle in the s2k pull, brings back memories
I'm new to the channel and I'm loving the content! I haven't been this excited for a build since Bully on PFI Speed!
Hey Kyle a 7.3 Godzilla would be sick in that. Be a good race against Mcflurry too.
Godzilla hell yeah
Too expensive
I love the ls platform, the 2j is cool too. Honestly I'd really prefer to see an rb, barra or even an ameribarra in there.
Imagine what a 900 lbs chassis with the correct high power drive train which produces 1800 wHP, with a proper suspension, full safety equipment would achieve, perform with a total 1800 lbs vehicle ??!!
Now that is what this full tube chassis Cive could become.
Be Innovative, Successful, Creative, Imgaintitive, perhaps employ some proper engineering experts too ?
@BoostedBoiz;
All The Best, Sincerely
You positive it a 2JZ going in it ? That was what I initially thought after he pulled the plug on the LS but now I’m not so sure . I could have missed something but I didn’t see him purchase a or anything with a 2JZ I don’t think and I also haven’t seen him or anyone else building a 2 JZ mtr for them ? Where is the Tesla at ? I’m not so sure he isn’t going to use it ! He keeps making comments about things we would expect like the oil can comment from Wyatt and the engine, power plant comments the big turbo you know we are going to put on it comment and the way they are smiling. He bought that Tesla for a project and right after he bought it he changed his mind ( or told us he changed his mind ) about the LS . He said the Tesla ( if it could even be done ) was going to look and be completely different and he has definitely been in contact with Rich who has already done a Tesla swap both ways …. Just a thought
@@jasonsparshott7208 Jason Parshott, clearly You have some interesting possibilities presented within Your comments.
A. Clearly Kyle stated "..a couple more cylinders..." for this Civic Tube chassis
a. => thus a minimum of 6 cylinders
b. not necessarily limited to 6 cylinders
c. not necessarily a I-6 with 6; perhaps V-6 as "Bully" & others with Honda, Toyota, Mitsubishi, others
d. certainly not electric, though if imaginative could have a hybrid arrangement
e. also could be, with imagination a mid-engine RWD or with two engines, AWD - perhaps two Honda K-, B- or other series, Mitsubishi
f. "cylinders" clearly also indicates such engines with cylinders, thus not rotary or other engine types
B. Now Kyle has two clearly "full race car" tubular frame vehicles, along with the plans for the working Tesla Plaid Model S and other 'scrap frame" Plaid, which Kyle stated he plans to use for, with, as developmental for his ideas with the functional Plaid.
C. there are actually numbers ideas, variations, possibilities to do, achieve with this Civic tubular chassis; just 900 lbs.
1. These depend upon personal ideas, imagination, visualization, conceptualization, development, innovation, abilities, capabilities, desire,
2. It seems from these three vehicles [NSX, Civic tube frame & Tesla Plaid], Kyle seems to have some imaginative ideas which he is more willing to proceed with currently.
3. We will see what his ideas, imagination, concepts are leading to developing and producing
4. Am hoping that Kyle & Wyatt will proceed with some actually amazing perhaps innovating implementations.; We Will See as they reveal each of them
5. My imagination, ideas, concepts, principles include many opportunities.
All The Best, Sincerely
@@newtonfirefly3584 Kyle can say anything… him saying more cylinders could just possibly be him throwing everyone off … that’s my point in mentioning him saying more cylinders . I’m not saying I’m correct but there has been every internal combustion engine swap preformed… a 2 JZ swap is played out so is a LS even a Barra the 4.2 liter GM I6 vortech is even a fairly popular swap … a Tesla swap is off the wall and has not been done often . He bought the Tesla for a build …. Just think about it . I’m not a idiot and I don’t know what he is doing but my thoughts are just as much of a possibility as any other build …. If you take every word he says literally obviously it’s not a electric swap but … he can say anything he wants just like you did with your comment back to me trying to imply I’m a idiot … Sincerely Jason Sparshott ( not Parshott)
@@newtonfirefly3584 no offense man but listen carefully to the way he sounds in this video when talking about the “ more cylinder’s ) he sounds to me to be using sarcasm in a joking manner.. just my thoughts I understand the possibilities are limitless …
Love how you kept the Oem lip on the tube chassis civic
I'd really like to see yall build the hell out of a j series
Hoping for a coyote if V8. Just to not see another LS build.
Why? You want to see him brake down every race?
Big block.
Ford/Chev/Mopar doesn't matter. Just big block.
Coyote cars are becoming the next big thing for sure
@@ThisClarkDude they’ve been the next big thing…on the street. In the legal dig game, the mutt isn’t keeping anyone safe
It’s a 2jz
2jz civic is gonna be sick!!!!!
MY boi Kyle STAY strapped up!!
Make sure the Jeboat blower fan pull from the lower hull. Fuels all settle at the lower engine bay. Currently the fan is mounted to high
I’m going to say 2jz from the looks of the oil pan they show at 11:20 can’t wait to see the how good this build turns out
Looked like a front sump 2J pan on the ground 😉😉
Yep
Tube Chassis Civic is going to be awesome no matter what engine you stick in her, but at a guess I'm going to say you somehow got a Steve Morris SMX for it. That would be so epic. Either way I'm looking forward to seeing it rip a 6 second pass and dominating the drag and drive events next year. PS that's your getter done by mark.
I just got my "Caint The Page" shirt, and my "Smoke In the Pipe" shirts ordered. Now lets hope that gets me an S2000 and a reason to drive down to Florida to get it!
A Barra would be sick in the rwd Civic.
Barra would be the Chad move tbh. Or that GM version of the Barra. I forget what it's called.
I'm guessing a 2JZ or a Texas Speed 427 either way it should be epic
2 more cylinders would mean a v6(or inline 6) so it isn't a tsp 427
I hope it's a 427 but probably a 2jz that takes 30 years to spool then blows up transmissions but who knows
A 427 would be awesome
@@keithstubbs4473 Yeah if he literally only meant two more cylinders when he said a couple more cylinders lol we shall see the 2J was definitely my first guess.
@@Lonnie-Young Everyone running a big power 2J with an auto is running a Powerglide or a TH350/400. It's definitely not Toyota's fault...
Love this channel ultimate jdm and american muscle Collaboration!!
If you want the car to stay light, I think j32a2, or a aluminum LY6. Both weigh roughly about the same. K-series is great but v6 or v8 just got better displacement and less stress on each rods and pistons.
first guess is LS and then second guess would be a 2JZ but that platform is twice as expensive if not more
I know you said you want to try something new as far as engines go but I would really love to see a honda motor in it.
OH BABY! Been waiting for this build! Exciting! 👍😁
Finally...ive been waiting for this build for a darn minute!!! When you revealed the new NSX I though about this car but for some reason i thought it was a AWD chassis but im so damn stoked bro.
I think it'd be pretty cool if he did a Toyota 1uz V8 in there with twin turbos!!
It'd be pretty sick if they actually made the 2KZ more than an old joke! But seeing as how the Ford Godzilla is the new hotness it's probably that.
The ford Godzilla is really nothing new or too crazy. It’s a 2jz he’s putting
8:00 After those big miles, worth giving the tow rigs some love; oil change, filters if needed etc and fix any little things before they become big expensive things...🖖
I’ll be honest for the longest time I thought this might have been where the Tesla’s drivetrain was going. 🤷♂️
put a Steve Morris SMX in it! im betting its a 2Jz or LS though
Best sounding s2000 ever, I’ve never heard them sound like that
That Civic looks so good!!!
A Aussie Barra would look sick in the bay
Hoping to see a 2jz finally on the channel
*_This build is gonna be insane! I can't wait to see the before & after when it's done. 💯_* Twin Turbo J Series RWD civic?? 👀👄👀
It’s more than wall art. Perfect stencil for anything that looks too plane
Skip to 11:04 to get to the point of the build
I can’t wait to see the rwd civic built.
My guess is, electric motor… no matter what it is. It’s going to be so rad.
With those carbon doors it loos like the Honda version of mullet. Hell yeah brother
So pumped to see this get built!
would love to see a barra in it
It'd be sick to see twin k20's in the tube civic. Like the setup on the green vw golf that 1320video covered.
I hope its a J series but it's probably a 2J or an LS. Mopar would be an interesting choice too.
I think its a J or a 2J because in a video a while back they were talking about the class they wanted to race it in and it had to be either foreign motor as in Japan or a Honda motor. The way they had that oil pan sitting im worried it might be a 2J probably built by Victor over at Induction Performance. That would be cool and all but a J series would be cooler imho.
Would love to see a J-Series V6 with something like a 86mm twin scroll turbo, run each bank of cylinders into each side to help with boost loss between gear shifts. Down side to a J-Series is there isn't the same support for the platform as say the B-Series/K-Series. Sourcing a spicy transmission would be key to reliability with getting the power down! spreading a 1000+ ponies across 6 cylinders as opposed to 4 would also relieve engine stresses for further reliability ;)
I think it'd be cool to do a coyote in the rear-wheel-drive Civic
i really hope its a vw vr6 😂 those thing are nasty for there size and power
that would be cool, but it is gonna be a 2jz. the oil pan matches.
I hope it gets a turbo j series v6 but with a built bottom end
This is gonna be insane, boosted boiz is slayin 2023 so far
I feel like the tube civic will end up with like a 2j or something 6cyl just on the basis as Kyle said a couple more cylinders
Them plaques are sick!! Good shout on making them, I'll order 1 to my brothers house when I'm in Florida in September...... That way i don't pay post and import tax to italy😊
About time!!!!! I can’t wait for this series
To your mention of Taylor's truck. CP4 pumps are known to fail. They don't make conversion kits back to the cp3 for no reason.
Would love to see an entire time lapse of the drive to and from!!!
14:34 Kyle finally all grown up haha
Just wanted to say I'm a mustang junkie and I have 4 of them. I watch for the awesome content..don't get it wrong I'm a mechanic and car guy and don't hate on no anybody 's cars we all have different tastes.. keep up the awesome content guys
This is the build I was waiting for, need a 6 second car on the channel.
Sure I don't hafta say it but do all the safety equipment in the civic/nsx builds and don't forget the fire suppression on em because that has been the one missing thing that shouldn't be on the up coming builds. I may have to take a ride back home to see ya run em. As soon as I mo Ed to north fl yall move to Seffner so ill be back for sure
I’m in Canada dawg British Columbia to be exact, once the giveaways can be won by me I’ll be getting myself tons of entry’s if the cars keep being as cool as this!
I hope they use some form of an RB engine. A 2J or 1J would be sick too. And there's no freaking way that Kyle weighs 170! I'm going to guess 150 soaking wet. Lol all jokes aside, You guys are killing it! Keep up the great work fellas! Oh, I bought a straw hat to try and win that S2000. I unfortunately live in Cali but I got a guy that will smog it for me 🤫
man kyle, you're cookin that Mazda differential in the s2k, with less than one week left to give it away you gonna be handing off a time bomb
this project bouta be crazy, that thing already looks tuff just sitting with bare bones. things gunna rip
Lil Hooter hittin that 3rd gear pretty good
Look at this guy hitting 3rd every single time. Brings a tear to my eye
would be awesome if the new engine was an RB30 like out in auz would give a lot of competitors a run for its money but this would be in a perfect world and unique as its not your typical 2jz
With that chassis you'd expect something huge HP is going in it so a straight 6 of some pedigree or an LS. I6 tends to be a tall and long configuration tho which doesn't look like a good fit