Useful homemade tools | amazingly DIY great tool | Genius idea
Vložit
- čas přidán 25. 06. 2021
- Useful homemade tools | amazingly DIY great tool
Welcome To My Channel (Be Creative) in our workshop you can find many things related to metalworking and woodworking like:-
Woodworking tool hand tool DIY tool lifehack homemade tools Genius idea metal works experiment DIY idea inventions etc
Our Video is made who are not able to buy tools you can try to make by yourself only if you are experienced and know how to use the hand tools.
But the videos which are experimental are only for entertainment and educational purpose only.
So don't try this in your home.
And if you're trying to make any of the tools make sure to wear safety gear and it will be at your own risk.
Instagram :
*Be Creative:- / be_creative_do_something
*Video creator:- goo.gl/4Y54WP
Facebook:
*Be Creative:- goo.gl/SWtiiL
*Video Creator:- / shailendra1994
Tik Tok:
*Be Creative:- @be_creative_do_something
*Video Creative:-@shailendra_patel - Věda a technologie
Hola buen día Dios te bendiga cuidate mucho este vídeo lo dedico a mis tíos gracias por todo lo que me enseñaron nunca se los podré agradeser tanto en espesial a mi padrino Ramiro Colque 🤗🙂🖒
Молодец !!! Ну что можно ещё сказать . золотые руки . Дед 71 лет .
ยอมรับว่าคลิปนี้สุดยอดมากๆ
อ
I enjoyed watching you make all these great tools and your shop is very professional and I always wished I had one like it. Thanks for all your work with the camera also. Never a lag in the filming. Don't pay any attention to the negative people as they wish they could do what you do~!! 💯💢💯
Muy eficiente y habil en su oficio,incluso parece facil,pero es su destreza,felicitaciones y gracias por sus iideas,desde valdivia,chile
I needed a pistol grip clamp. So I made one out of a new caulking gun that cost more than the clamp would've and took more time to make than it would've to go buy one, and now I have to buy a new caulking gun. Makes perfect sense
😂 lmao
GOSTO MUITO DE SUAS IDEIAS MUITO CRIATIVO VC E 10
Uno de los mejores videos que e visto en mi vida ,felicidades
Awesome informational educational video experience Y'alls God Bless Ya 🙌🙏
Esse cara é muito bom
Gran TRABAJO EXCELENTE Y MUY BUEN VÍDEO BENDICIONES Y ÉXITOS EN SU TRABAJO, GRACIAS DESDE PANAMÁ WAOO SALUDOS MI AMIGO 🤗🤗🤗🇵🇦🇵🇦🇵🇦🇵🇦🇵🇦😀😀😀😃
Gjb .Dimag . Gjb Sfai .Gab Majbuti . Wonderful Wonderful.
All rounder vv nice
thanks
Maharashtra, India
👍 Informative video 🙏
The one that attracted me was the one that look liked a bike chain link with wingnuts in the guys hand, where did it go ?
Same here. I have run into videos like this also where they offer you crack in the initial scene just to keep your attention throughout the video and then never giving you the crack. Now you are out on the street, looking for crack, stealing... just because of a bike chain with wingnuts.
If a channel does this once it might be an oversight but the second time they use clickbait I just block them.
@@abiseid
?!
?
??
!
!
?
?
?
!
.
!?!!??!?,???!?!,??
!???? ?!?!!??,!?!?????!??!?!?!!?!!?!??!,!!??????,! !
.
?? ?!?!?!!!??!!? ?,!!??,!??? ???!,???????!??!!?!!??!?!?
!!
. ? ?,??,??!??!??!??!??,??????!,???,??!!?,??!!????????,??!? !?
!
?
!!
?????!?!!!?????!????,??!!,??! ?!??!
!!
???????!???,???!!??!!???????
!??,!?
?
!!
!???,??!?!????????????,?!??!????
!
!
! ?
!
M??!?!!??! M
.
M
! ?
? ? ?!!?.?,!??!?!?,! W?!? M
???
@@abiseid
?!
?
??
!
!
?
?
?
!
.
!?!!??!?,???!?!,??
!???? ?!?!!??,!?!?????!??!?!?!!?!!?!??!,!!??????,! !
.
?? ?!?!?!!!??!!? ?,!!??,!??? ???!,???????!??!!?!!??!?!?
!!
. ? ?,??,??!??!??!??!??,??????!,???,??!!?,??!!????????,??!? !?
!
?
!!
?????!?!!!?????!????,??!!,??! ?!??!
!!
???????!???,???!!??!!???????
!??,!?
?
!!
!???,??!?!????????????,?!??!????
!
!
! ?
!
M??!?!!??! M
.
M
! ?
? ? ?!!?.?,!??!?!?,! W?!? M
???
@@abiseid
.
!
?
Jesteś
M
?
.
!
,
?
M .
!
!
M
?
M
!
M
?
!!!
M
?
M
!
M
M
!
!
?!
M
.
!!
?
M
!,!?!,!!!!??!!!?!?
M
,
!?! ?!??!??!.,!?!!??,!?.!,?!?!?!!,!?!?,!?!?,, !??? ???!??,!?!??!?!?!!??,?
!
M
M
!
If possible I utilize a drill press in tapping, that's what the center-drill pit at the other end of the tap chuck is for. I do like his drilling small pilot holes before larger ones, I definitely do that also with thicker metal.
Amazing sir tutorial nya.🙏 Terima kasi sudah mau berbgi ilmunya 🤝🇮🇩 indonesia
창작 을 할수있다는것은 역시 그많은 생각과 새로운 탐구 생활 에서 얻어지는것~ 정말 좋은 작품과 실용적인 것 등에 찬사를 보내는 바 입니다 ~ 모쪼록 새해 복 ! 많이 받으세요 ! 다음 작품 을 기대하며 대한민국 에서 올림 감사합니다 ! 건강하시고 행복한 시간돼사길 ~~~이상 ~~
Nice that you home made a clamp from a caulking gun. However, they are already out there in many sizes.
Excelente ,su creatividad y capacidad de trabajo ,felicitaciones por inspirarme en algunos trabajos , gracias
Smart dude! Love the last one with broke tap too split a bolt, I won't lie I'll be using that!
ASOMBROSA CREATIVIDAD. TE FELICITO POR CREAR, HERRAMIENTAS DE GRAN UTILIDAD; SIGUE COSECHANDO EXITO.ATTE. MOY.
listen to the boss,,,,, don't forget to stop by for black coffee together... goes duit and goes natural so that you will increase your enthusiasm for work and add brothers thank you very much
Very good home made tools. Everyone can make these tools at home cos we all have drill machines. Drill bits grinding machines, lathe machines at home...
We do ?? I wish we all did 😲
If you don't have any tools, then you won't need any of the tools he made here. The tools he made are useless by themselves, especially out-of-shop environment.
Show
Parabéns pelo canal
Автор канала- тебе респект и уважение. Собраны нужные, и повторяемые ( воспроизводимые) приспособления, помогающие и необходимые в работе
Amazing video
Glad you think so!
Brother
You are best and hardworking
God bless you
Whatever you done, are guide book for self employed technicians and small scale manufacturers or maintenance people 🙏🏻
Exelente buenas ideas 👍
I wish I had access to all the metal that this fellow has. Oh, and access to all the creativity, too!
Hey look everyone! I spent my day off making a tool I could have bought at the store. But now I cannot use it untill my next day off. Damn!
அருமை. பயனுடைய பதிவு நன்றி.
Excelente.
This guy is the king of clamps and presses.
B.C you are very smart! all blessing to you. Greeting from Tucson Arizona USA.
Good guy! Everything dry. This tool will definitely last him a long time. A little machine oil costs a few bucks.
People who have unliked this brilliant video are just egoistic trolls, what's there to not like this really creative video?
Good ! & Good ! Thank !
Some clever stuff going on in that home shop. 👍
If you already have the right tools to make these tools then you don't need to make yourself any tools.
Honestly it's cool that you make all this stuff but if you have all these taps and dies on hand why don't you just buy some clamps and stuff. Seems like it would be worth the dollar to time ratio
This educates people
Search for P.N.R Construction
Quality works.
Some of those were really great. I liked the solder pot, and the nut cracker the most. However, in some cases he used tools bought at the store, to make tools... you can buy... at the same store.... um... ???
I think its about alternative and creative use of existing tools.
@@sachinmundra I get that, and if I thought I would never use the existing tool again... I dunno... It's still fun to watch, so good enough for me lol.
I think the point is. And I understand your need to kiss a complete strangers ass but. If you knew how much work goes into welding and fabricating it wouldn't make any sense to take a useful tool and turn it into another useful tool because you can. It isn't practical at all.
Thank you for sharing video
Like the quick C clamp!
É um gênio mesmo
Mantap.... bermanfaat....👍
Okay to for the press, all the compression power is determined by the holding strength of those four top screws. Try harder.
I enjoyed watching this video, very helpful thanks for sharing .
Very useful tools for many things. However, you would need professional tools to make the tools.
In my heart, this man breaks into that shop at night to make all these tools, and leaves them for the actual employees that needed them to find them the next day. He's like a tool crafting vigilante, a Batman for small machine shops.
Like the elves who raided the lowly cobblers workshop one night, finished off his work for him & left a new pair of shoes which they made for him.
I really am a sucker for deserve-ed acts of kindness. How about Y'all?
Adi
D
A
Phat
ok
@@brianwood7480 776
I really enjoyed watching that, thanks for all the helpful insight.
AWESOME!!!!!
Some clever ideas but they eventually become like those 'underground house and pool' videos - variations on a theme.
Incrivel!!!
Can you do a video on how you made your metal curve bender?
Just looked like a couple of drilled and tapped holes, then a couple bearings put on a beefy bolt. I feel like you could come up with a better handle for it than some scrap steel laying around the shop......
The table clamp could be improved by using a larger piece of square tubing sliding over the arm, attached to nuts on it's side which the crew goes thru, so the screw can be run from the outer end to the mast, and clamp anywhere in reach of the arm instead of just the outer end.
L
wow
Good ideas mash'Allah
Good job....
God bless you.
Contuagration for you creativity 🧠👍💡👏👏👏
Bearing press you'll find out tacking mild steel instead of using a nut as hard as your bolt
Not tacking Tapping
King of inventions
Không công dụng mấy cho GĐ? Chỉ dành cho nghề nạp bạc đạn ok?
Super bro
My dear, would you have these measurements of the mini bench press for me to make one, to help me in my day to day projects, thank you for the measurements
Ok everything I seen with the jack I can see worth making because the cost of those pre-made out ways the cost of making it.....BUT the others I just don't see any savings. The cost of those pre-made is nominal compared to the cost of material and his time considering his skills
Near exactly what I was thinking. Except applied to just about everything else as well!
You're going to hurt yourself messing around with those little bolted together presses...
WELD THEM AND REINFORCE THEM FFS!!!!
Nah, just use hot melt glue.
Hmmm. Yes. Better using chocolate then he won't hurt himself
But the little nut splitter at the end looked useful ,👍
@@Mike75575 Its enough to make it on one side. There is place that you can turn the nut
A Tractor Drives to the Farm
Now that is an engineer.
for bearing press, you can also use a C clamp.
Hard to get enough pressure with a c clamp to take bearings out.
@@gregholl5011 if you put the clamp in a bench vice and use a breaker bar on the handle you can get enough pressure to break the top of the clamp off
Nice tools you have made. Greetings from Canada.
That would be fine if everybody had dads workshop to work in.
yes thats true
alright i learn something new only problem now is the tools
That's the point, you make your own.
Interesting ideas, flawed executed
Good idea professor
lot of cheaper, buy in the shop :)
Josssssssssss. Mantabb
The torch attachment I'd never thought of. Good work!
That’s a good one !
Sweet cord reel
Thank you! You have an excelent thecnic.
Very nice and handy.
Problem is most people don't have the tools to make these things
Esas herramientas las venden en muchos lugares. Y son baratas. Buen entretenimiento pero muy inútil. Ve y compra la herramienta que necesites.
Хорошая идея домкрат использовать.
Сразу подумал можно сделать пресс для яблочного сока.
great video
2x speed, volume muted, Daft punk on another open Tab... this is cool
Where is the chain link tool that is on the thumb-nail? That was the reason I clicked here. Thumbs down from me for clickbait.
wow...its very good tutorial and cool tools....😁👍
Some very good stuff here...
Super Creative...
Its creative dude, awesome
What type of liquid did you put to avoid burn the metal broca?
I'd assume lubricating oil. But anything works, even water. Oil won't cause rust though.
Excellent work
Thank you! Cheers!
👍😍👏😆
You do Evey thing fine, like factory item
jerkin cable coiling really is an invention.
Strange how he has hundreds of dollars worth of thick plate steel laying around but can’t afford a press.
Material costs and tool availability vary from place to place, some people just like making things, he can afford one for sure, and what kind of video would it be if he just filmed himself walking into a store, buying a press then ending the video?
The tools that he is creating are absolutely portable and have multifunctional uses. A press on the other hand is……………….I need not say more!
What you pay for materials depends on how resourceful you are . I rarely need full plates or lengths of steel , so I pickup off cuts from a local fab shop super cheap , I also have a good relationship with a steel distributor that only sells full lengths of material , but if they get any flat bar or angle that’s bent or damaged in shipping ,they scrap it , so I buy it for about 20 cents on the dollar , I do the same with their plate sometimes they get plate with a little too much surface rust to sell to their “big customers “ so I pick it up cheap .
@@Violaetor k
@@Violaetor I k
Could somebody please point out the genius part as I must have missed that part?
Super!!!! 👏👏👏
ya, homemade in a shop full of power tools and welders, cause everyone has that at home