Restoration of antique German watches from the 1950s

Sdílet
Vložit
  • čas přidán 5. 09. 2024
  • This video is about the restoration of old German clocks. I bought this watch at a flea market for $5. To restore them, I used sandblasting, powder painting, and made a new dial using a laser. The mechanism was washed in an ultrasonic bath.
    I hope you enjoyed this restoration. Subscribe if you want to see more new restorations

Komentáře • 190

  • @helenehlers9800
    @helenehlers9800 Před 6 měsíci +24

    My parents immigrated to Australia in 1960, and they had that exact alarm clock. My siblings and I would constantly mess around with it to make the alarm go off. What a blast from the past. Nice restoration.

  • @Eduardo-uo7qs
    @Eduardo-uo7qs Před 5 měsíci +8

    Excellent and beautiful restoration work.
    I would keep the same parts and colors, but you are the watch restorer.
    Congratulations
    The time machine thanks you for keeping history alive.
    Rio-Brazil

  • @forevereuropa
    @forevereuropa Před 6 měsíci +6

    Gute Arbeit! Ich bin sehr vom Gehäuse und Zifferblatt überzeugt! Hier eine kleine Ergänzung zu diesen Wecker:
    Dieser Tolle Wecker ist aus den 1930er Jahren mit einen deutschen Junghans Uhrwerk verbaut.
    Kleiner Tipp:
    Bei der Reinigung der Uhrenteile sie müssen die 2 Zugfedern unbedingt von der Achse entfernen, sie müssen einfach die Zugfeder festhalten und das Aufzugsrad in die entgegengesetzte Richtung drehen Dann kann man die Federn besser reinigen.

  • @azizwaheed1078
    @azizwaheed1078 Před 5 měsíci +2

    THIS IS A REAL PROFESSIONAL RESTORATION

  • @georgebrown8312
    @georgebrown8312 Před 5 měsíci +3

    Fantastic restoration job. That clock looks much better and it works like a charm too. Excellent work you did.

  • @vinceianni4026
    @vinceianni4026 Před 6 měsíci +10

    Beautiful restoration mister beautifully restored good job well done

  • @NiaJustNia
    @NiaJustNia Před 6 měsíci +44

    You used a little bit too much oil for the mechanism, which runs the risk of it clogging up after a while of running, making it stop. Just something to keep in mind for next time, or anyone reading this wanting to restore a clock or watch, you only need a tiny dot of oil, and the smaller the piece, obviously the smaller the drop of oil. Clockwork is very finicky when it comes to too much or too little oil, where it seems fine at first, then its runtime starts fluctuating. I'd say working out the oil amount is the biggest thing when getting into clockwork restoration, as your brain tells you that more oil will make it run smoother, until the clockwork turns the oil into goop and the watch stops! Hope this helps anyone getting into clockwork restoration 😊

    • @PSVRestoration
      @PSVRestoration  Před 6 měsíci +5

      Thanks, I'll remember this next time

    • @NiaJustNia
      @NiaJustNia Před 6 měsíci +8

      @@PSVRestoration Wristwatch Revival is quite a good channel for learning about repairs and common mistakes as it's also about his journey of getting into clockwork repair, and he doesn't hide his mistakes. If you get more into watch or clock repair, it might be quite a good channel for you 😊

    • @rosemarymagrino772
      @rosemarymagrino772 Před 6 měsíci +4

      Love that channel😊

    • @mouloudhydra2430
      @mouloudhydra2430 Před 6 měsíci +1

      Q0

    • @ramachandrarao4163
      @ramachandrarao4163 Před 6 měsíci

  • @sudhakarmallavarapu6402
    @sudhakarmallavarapu6402 Před 3 měsíci +2

    Excellent n beautiful restoration works..hats off for your excellent work..needs lots of patience n watch repairs mechanism

  • @emelierose1472
    @emelierose1472 Před 6 měsíci +4

    Absolutely beautiful restoration well done 👏 👍

  • @oriolesfan2463
    @oriolesfan2463 Před 6 měsíci +4

    What a beautiful blue color! Good choice. Fiber laser looks AND sounds cool too! Nice job!

  • @carrestore
    @carrestore Před 6 měsíci +11

    Beautiful restoration

  • @jamesfield5346
    @jamesfield5346 Před 6 měsíci +3

    The bell looks amazing

  • @Sovenokk_1979
    @Sovenokk_1979 Před 5 měsíci +3

    очень тонкая работа ! мастер ! мои восхищения Вам

  • @MrFsandt
    @MrFsandt Před 5 měsíci +2

    Beautiful Junghans alarm clock! ⭐👍

  • @jazze63
    @jazze63 Před 5 měsíci +2

    Looks brand new! Amazing!

  • @user-uo8fc4gu2t
    @user-uo8fc4gu2t Před 5 měsíci +3

    Germany very best way of life 👍 👌✌ 🇩🇪

  • @hinduhamesa
    @hinduhamesa Před 3 měsíci +1

    Good restoration. The balance wheel still doesn't oscillate properly. It needs more energy from main spring.

  • @Davide_Firenze
    @Davide_Firenze Před 5 měsíci +3

    Fantastic job!!

  • @jt9498
    @jt9498 Před 6 měsíci +16

    That's not a watch, it's an alarm clock. :)

  • @rameshshankar1010
    @rameshshankar1010 Před 5 měsíci

    We had a similar one in our childhood school days worked well for decades

  • @yahiaflifel6045
    @yahiaflifel6045 Před 6 měsíci +4

    Bravo pour votre travail ❤🇩🇿

  • @hovikmalians3523
    @hovikmalians3523 Před 6 měsíci +3

    Excellent restoration 👌🇦🇲

  • @ibrahimkocaalioglu
    @ibrahimkocaalioglu Před 6 měsíci +3

    good job 👍

  • @Tom-zq7lu
    @Tom-zq7lu Před 5 měsíci +4

    Fantastic and beautiful thank ✌️ 🆗️ 👍 🤗

  • @tammyslash7251
    @tammyslash7251 Před 4 měsíci +1

    So now you are a clock maker, you are so cool❤

  • @marisapalaio2838
    @marisapalaio2838 Před 6 měsíci +2

    Que restauração impecável! Amei ver todas as etapas.

  • @raziel3726
    @raziel3726 Před 6 měsíci +3

    Amazing Restoration 👍🏻👍🏽👍🇬🇧🇬🇧

  • @emilin69
    @emilin69 Před 5 měsíci +1

    Super restoration

  • @oliverw3646
    @oliverw3646 Před 6 měsíci +2

    Magnificent work.

  • @emmanuelu.9481
    @emmanuelu.9481 Před 6 měsíci +2

    Excellent job! I like the blue color you put on it.

  • @pietrodestefanis5208
    @pietrodestefanis5208 Před 6 měsíci +2

    Sei bravissimo !!!!!!!! Complimenti !!!!! Waw

  • @hossein8598
    @hossein8598 Před 6 měsíci +3

    Very nice❤❤

  • @hectorflores6097
    @hectorflores6097 Před 6 měsíci +1

    u are an artist.

  • @patanvalle9379
    @patanvalle9379 Před 6 měsíci +2

    Excellent job. greetings from Buenos Aires, Argentina

  • @andrzejporeda7281
    @andrzejporeda7281 Před 6 měsíci +3

    Przepięknie jest odrestaurowany ten stary zabytkowy budzik Pozdrawiam serdecznie 👍👍👍👍👍

  • @user-ip6xn2of1p
    @user-ip6xn2of1p Před 6 měsíci +2

    Great job, well done 👍👍

  • @christinebrannigan1288
    @christinebrannigan1288 Před 6 měsíci +1

    Good job on the clock

  • @fernandoAveledo
    @fernandoAveledo Před 2 měsíci

    Thanks for sharing this amusing restoration. I wonder how many hours, materials, etc you have used. Nowadays this type of piece does not attract the attention of the public considering mobile devices and so on which is a shame obviously...Last but not least I would like to make a final comment on accuracy of these alarm clocks: looking the heavy gears with no jewelled pivots, I guess that those who used these clocks a long time ago should have to adjust the time on a daily basis...!!!

  • @user-lc2tx5mz1l
    @user-lc2tx5mz1l Před 4 měsíci +1

    Приятно смотреть,как умелые руки дают вторую жизнь предметам.

  • @rosellabill
    @rosellabill Před 6 měsíci +2

    Nice work on the watch young Man. Have a great day

  • @lyarigeneralhospital
    @lyarigeneralhospital Před 6 měsíci +2

    nicely done

  • @ronnyright2
    @ronnyright2 Před 6 měsíci +2

    I don't need a rotten alarm as I'm retired!. Nice job and very relaxing to watch, though I could have done a better job with a sledge hammer.

  • @robertpaulson8290
    @robertpaulson8290 Před 6 měsíci +7

    If the option was available, I would've nickel plated the legs and non casing metal hardware

  • @user-oo1qp4yi7p
    @user-oo1qp4yi7p Před 6 měsíci +2

    Отличная работа! Получил удовольствие

  • @BALDA8511
    @BALDA8511 Před 6 měsíci +2

    👍, Качественная, профессиональная работа, молодец! Иногда ты берёшь в руки какую-нибудь деталь большим и средним пальцем (и я тоже)...почему??😆😆😆

  • @franciscoballester6541
    @franciscoballester6541 Před 5 měsíci

    En hora buena caballero me ha gustado mucho tu vídeo espero ver más

  • @pavleilic1132
    @pavleilic1132 Před 6 měsíci +2

    Nice video and nice restouration 👌,but how to set main spring

  • @TheLukemcdaniel
    @TheLukemcdaniel Před 6 měsíci +7

    Thank fuck I had my headphones on so you could completely obliterate my ability to hear with that sudden laser bullshit.
    I greatly appreciate it.

  • @manecobeirao
    @manecobeirao Před 6 měsíci +2

    Very good !!! ( Brazil )

  • @marcelomachado1980
    @marcelomachado1980 Před 6 měsíci +2

    Amazing! Congrats!

  • @AndreaMerchak
    @AndreaMerchak Před 6 měsíci +2

    Great job! ❤

  • @timtaylor8406
    @timtaylor8406 Před 6 měsíci +2

    Very nice.

  • @guntersteinbring4067
    @guntersteinbring4067 Před 4 měsíci

    War eine schöne Arbeit. Ich liebe alte Uhren. Danke für das Video. 😊

  • @Suntecma
    @Suntecma Před 3 měsíci

    wonderfull job and hobby thanks for sharing

  • @horacioramos6508
    @horacioramos6508 Před 3 měsíci

    Excelente work

  • @CedricKarlFonk
    @CedricKarlFonk Před 5 měsíci +1

    That is a very small oscillation for that type of balance wheel. From what i can hear, it's not in beat either. Check it out.
    Im intrigued as how you chromed the pieces and sprayed the case. Can you explain the process of the two please? Thanks.

  • @user-hj6ve7de2g
    @user-hj6ve7de2g Před 6 měsíci +2

    Отличная работа!

  • @nikolaos9906
    @nikolaos9906 Před 4 měsíci

    Congratulation very good work..

  • @ivoolazabal7323
    @ivoolazabal7323 Před 4 měsíci +1

    Un trabajo exquisito. Saludos desde Uruguay.

  • @jamesfield5346
    @jamesfield5346 Před 6 měsíci +1

    Does the length of time you soak in the causti acid depend on the type of metal/steel/alloys?

  • @user-ip3yg3zy4p
    @user-ip3yg3zy4p Před 6 měsíci +2

    Це просто SUPER

  • @Gribishe
    @Gribishe Před 6 měsíci +1

    Реставрировал, с видукрасиво. Но будут ли они идти так же точно, как часы немецких мастеров? )

  • @user-Galinskayatatiana
    @user-Galinskayatatiana Před 3 měsíci +1

    Браво!! Это очень сложно. ❤❤

  • @rapcom
    @rapcom Před 6 měsíci +1

    Nice restoration but its better if you paint the same color of the clock.

  • @user-tp9jp7hd6j
    @user-tp9jp7hd6j Před 6 měsíci +3

    Волшебство, созданное руками мастера-волшебника. Супер!

  • @walidesmat3282
    @walidesmat3282 Před 4 měsíci +1

    You prftional man

  • @kevinumhey5939
    @kevinumhey5939 Před 3 měsíci +1

    The hammer was scary !

  • @antonelladivannidibiaggio533

    Ha quedado muy hermoso ese reloj despertador.....excelente trabajo. desde CHILE....BIANCA ANTONELLA DI VANNI DI BIAGGIO, edad 27

  • @luizalbertorodrigues4560
    @luizalbertorodrigues4560 Před 4 měsíci +1

    The best

  • @saisamayseva8712
    @saisamayseva8712 Před 6 měsíci +2

    Good job.All the best. Keep it up.

  • @paulopinheiro4365
    @paulopinheiro4365 Před 3 měsíci +1

    Muito bom. AMEI!👍 (Brasil)

  • @Celiamarcal2
    @Celiamarcal2 Před 3 měsíci

    Excelente trabalho nos mínimos detalhes.

  • @annettewagner2633
    @annettewagner2633 Před 3 měsíci

    ❤he did not use any oil the clock is good

  • @Olga.888
    @Olga.888 Před 6 měsíci +2

    Отличная работа! Класс! Скажите, а как вы запоминаете последовательность деталей при сборки?

    • @PSVRestoration
      @PSVRestoration  Před 6 měsíci +3

      Спасибо, посмотрел на своем видео как разбирал, и в обратной последовательности собрал

  • @Art_3791
    @Art_3791 Před 6 měsíci +2

    Mogłeś utrzymać ten zegar w tej samej tematyce kolorystycznej. Ten niebieski kolor….. słabo to wygląda.😊

  • @paoloantolini6890
    @paoloantolini6890 Před 6 měsíci +1

    Oscilla poco. Devi verificare lo stato delle punte dell'asse del bilanciere (se serve vanno lucidate e rettificate) e lo stato di lucentezza dell'interno delle viti svasate. Inoltre le molle mi sembravano non più buone. Ottimo il consiglio di lubrificare meno. Per il resto hai fatto un lavoro favoloso. P.s. sono un orologiaio ;)

  • @EliezerMagliano
    @EliezerMagliano Před 6 měsíci +1

    Top! But wouldn't nickel plating be better?

  • @enricospedicato5543
    @enricospedicato5543 Před 3 měsíci

    Un gran trabajo...pero el alma de un reloj es su pantalla...manchada, estropeada... pero creo yo que hay que conservarla... Es mi opinión, con mucho respeto

  • @romanroizin4223
    @romanroizin4223 Před 3 měsíci

    Прочитал реакции зрителей и понимая что смотрят люди не знакомые с часовым делом могу их понять . Действительно аккуратно пропескоструен и покрашен корпус , лазером вызжен новый цыферблат. И на этом всё хорошее кончается . Во первых будильник то не немецкий, а советский после военный . Выпускался сначала в Москве а потом в Орле завод *Янтарь*. Точно не скажу год выпуска , но только не в 50-х годах , а гораздо позже. В первых будильниках маятники были без камней в отличии от этого. Дальше , сам ремонт если не обращать внимание на теотральность жестов произведён очень плохо! Баланс не имеет нормального хода ( нет полного разворота) . Я подозреваю что одна из цапф согнута так как хорошо видно как танцует полотно баланса . Надо было отжечь цапфу , выровнять и отполировать . Проверить анкеную вилку (она может набивать и это тоже может быть причиной плохого хода). И последнее - много масла хорошо в каше ! Она от этого вкуснее становится ! А в часах наоборот - чем меньше и в нужном месте тем лучше ! Ибо масло высыхает е засоряется пылью и становится аброзивной кашей .

  • @noari6553
    @noari6553 Před 3 měsíci

    Does the device at the beginning exfoliate or dye?

  • @amboss594
    @amboss594 Před 2 měsíci +1

    El comentario no lleva ninguna carga semántica, sirve de apoyo al canal y agradecimiento al Autor.

  • @zakariailyas8943
    @zakariailyas8943 Před 5 měsíci

    Bone travail

  • @user-fr6mg1vs2x
    @user-fr6mg1vs2x Před 4 měsíci

    Мне больше нравился оригинальный циферблат, с патиной. Можно было оставить, ведь он не плохо сохранился.

  • @philipbrailey
    @philipbrailey Před 5 měsíci +1

    Does the Alarm work?

  • @19Bmiller
    @19Bmiller Před 6 měsíci +1

    Bravo

  • @osnetesantos419
    @osnetesantos419 Před 3 měsíci +1

  • @jamesfield5346
    @jamesfield5346 Před 6 měsíci

    How long did you have to fight with all those gears to line up with the case? Lol. Me... A very long time. Probably multiple times... Lol

  • @stefanodeluca-jl2si
    @stefanodeluca-jl2si Před 3 měsíci +1

    Grande Maestro artigiano

  • @frantpubal1921
    @frantpubal1921 Před 3 měsíci +1

    the machine must be REPAIRED, not just cleaned.....

  • @mustafanazlgul
    @mustafanazlgul Před 3 měsíci +1

    👍

  • @lay0jocr908
    @lay0jocr908 Před 3 měsíci

    لماذا تزيل الطلاء نظفها فقط لكي لا تفقد قيمتها التاريخية

  • @toongoos87
    @toongoos87 Před 6 měsíci +1

    I like it , but this 12 ... as a designer - you'd better make it bigger , but little ziferblat only with 3, 6 and 9 . But your restoration amazing

  • @garyfox8701
    @garyfox8701 Před 6 měsíci

    Doesn't everyone unscrew things an eighth of a turn each time?

  • @user-sv8fk3ff8u
    @user-sv8fk3ff8u Před 6 měsíci +1

    nice👏❤️🌹🍀🇮🇶

  • @fareeda6118
    @fareeda6118 Před 4 měsíci

    I wish you had painted it red.

  • @user-ny5ge8fn4e
    @user-ny5ge8fn4e Před 4 měsíci +1

    آفرین واقعاً لذت بردم آفرین عالی ❤❤

  • @Urantia-1411
    @Urantia-1411 Před 6 měsíci

    Muito bom

  • @evgenijkern
    @evgenijkern Před 5 měsíci +2

    Schön arbaiten Maine brygar😊❤🎉😮

  • @alessandroalberto6431
    @alessandroalberto6431 Před 6 měsíci

    Ottimo lavoro, ma perché non rispettare la tinta originale ?

  • @indirayakupova6544
    @indirayakupova6544 Před 6 měsíci +1

    У меня почему то чувство, что они (часы) опаздывают примерно на 10 минут в день