Note that these demo videos always take place in a room with billiard table-flat floors. These things work considerably less well on standard garage floors. In fact, if you were moving it forward and one of the front wheels encountered a small stone, the stand would stop and the bike would continue forward and off the centerstand. Anyone who's skateboarded knows what happens if a wheel that size hits even a tiny chip of a stone.
No, this demo is done in this condition because all Easy-P products are made to drive on the parking device and the most critical cases are with floors with low friction (that's why high performance wheels with breaks are used and a specific rubber below the slider). For very disconnected garage we promote our Bike Shuttle series for heavy duty use.
Good point. Learned the hard and expensive way in my case when I had a bike fall over when the wheels caught on the uneven concrete floor. My solution was to line the floor with the chipboard boards designed for flooring lofts sold by B & Q ( in the UK). It cost me just under £50 (you only need to do enough to be slightly longer than the bike).
@@bwanasid A bit unfair. Judging by the fact that I'm not sure the whole paragraph actually makes sense I wonder if English is actually the guy's first language? However it is true that these devices work a lot less well on uneven surfaces.
Have two similar dolls which cost me £60approx each. Best money I've spent bikes can be easily hauled around and moved into tight spaces in my single garage with a concrete floor. But bike must have centre stand for this type!
Why does this dude need one? Has a garage the size of an aircraft carrier and the floor is supper smooth. Also why would you back the bike back out of your garage when you could turn it round to face out? Thought that was the idea?
@@perkalater79 Unfortnately we do not trade in US, we need to make a specific offer. You can contact us at easy-p@resteghini.it and we can provide you all needed information.
Note that these demo videos always take place in a room with billiard table-flat floors. These things work considerably less well on standard garage floors. In fact, if you were moving it forward and one of the front wheels encountered a small stone, the stand would stop and the bike would continue forward and off the centerstand. Anyone who's skateboarded knows what happens if a wheel that size hits even a tiny chip of a stone.
No, this demo is done in this condition because all Easy-P products are made to drive on the parking device and the most critical cases are with floors with low friction (that's why high performance wheels with breaks are used and a specific rubber below the slider). For very disconnected garage we promote our Bike Shuttle series for heavy duty use.
@@Easypmotorbike I wouldn’t buy shit from someone who can’t spell and use *brakes* correctly. SMH...🙄🤦🏼♂️
Exactly! Way too low. That wouldn't move at all in my garage. If they demonstrated this on the asphalt, i would buy one
Good point. Learned the hard and expensive way in my case when I had a bike fall over when the wheels caught on the uneven concrete floor. My solution was to line the floor with the chipboard boards designed for flooring lofts sold by B & Q ( in the UK). It cost me just under £50 (you only need to do enough to be slightly longer than the bike).
@@bwanasid A bit unfair. Judging by the fact that I'm not sure the whole paragraph actually makes sense I wonder if English is actually the guy's first language? However it is true that these devices work a lot less well on uneven surfaces.
Why not use it to spin the bike around and go out the garage forwards?
Sure, you can do it ;-)
Have two similar dolls which cost me £60approx each. Best money I've spent bikes can be easily hauled around and moved into tight spaces in my single garage with a concrete floor. But bike must have centre stand for this type!
Why does this dude need one? Has a garage the size of an aircraft carrier and the floor is supper smooth. Also why would you back the bike back out of your garage when you could turn it round to face out? Thought that was the idea?
Why would you not turn the bike to go straight out ?
Fantastico, accessorio utilissimo.
Extremely thoughtful, and useful very good design, big thumbs up 👍🏻👍🏻 great idea.!!!
Does this stand work with the lower suspension models?
Good morning I am interested in buying it, they send it to Mexico
Very Impressive, though also very pricey. Nice work.
Thanks, if you need more info just let us know
amazing
Show
Do you have a website in english? Ship to the US?
Redline stands makes one just like this. I have one. Built like a tank. I use it to move my Harley.
www.easypmotorbike.com/
@@Easypmotorbike hai un sito web in inglese? spedite negli Stati Uniti
@@perkalater79 Unfortnately we do not trade in US, we need to make a specific offer. You can contact us at easy-p@resteghini.it and we can provide you all needed information.
Very good idea.
I might need one of those.
How to get it please ?
www.easypmotorbike.com/
Waooh je là veux ta moto
היכן ניתן לרכוש את המתקן הזה?
good day I Inter buy send to Mexico
Dear Francisco, please contact us at easy-p@resteghini.it and we will provide all needed info
Superb
And this product is apparently no longer available.
Onde comprar?
www.easypmotorbike.com/
How can I purchase this bike?
www.easypmotorbike.com/
skoda,ze na stranke nemaju tu istu podlozku,co je na videu😬
La gracia del video que saca la moto de culo jjaj porque no le diste la vuelta y la pusiste de cara para sacarla jajajaja madre mía 😂
And then they realize, the bikes already on 2 wheels.
Hummmm
L