Bandit "Wash Down" 8 GPM 2500 PSI Pressure Washer Overview
Vložit
- čas přidán 3. 12. 2020
- In this video we go over and demonstrate the Bandit 8 GPM 2500 PSI "Wash Down" Pressure Washer.
see the unit here: bit.ly/37AnoNs
You can see how quickly and effectively this unit can be used for House Wash & Soft Wash applications. Thanks to it's high flow and high pressure combination this unit is going to be a GAME CHANGER. - Jak na to + styl
What would be your house wash mix using that machine. How much SH and water would I need to make a house was mix that wouldn't kill plants. Does it cone with the hose..?
Are you still can run 8g a minute in 13hp engine?
Great videos as all ways do you prefer Comet or General Pumps and why ? TIA
It's hard to choose between the 2, they are both very high quality pumps made in Italy.
Your link in the video description wont load or doesn't work
Can you replace the pulleys and the bass I have an old one the engine still runs great after all these years and all the pulleys are rusted I'm afraid the pump might be shot to would it be worth ordering the parts and fixing it?????????????
it's possible. If the pump hasn't been running in years it will probably need a refresh (oil change, new seals & valves)
What psi you think a 20hp engine would produce with that pump?
Can I buy just the unit itself (power washer) without the hose, lance, etc? I have plenty enough hoses and lance. Thanks
anything is possible email: custom@jnequipment.com with your request
Like to see a fan tip?? And how far she really shoots?
What are you talking about when you say it's not optimal for using SH? This is a unit basically built and set up for downstreaming using SH & surfactant to apply and also water for rinsing. This is all this unit is built for basically.
I'd like to see this with an xjet or m5 twist. Maybe a sharpshooter.
Can u give the dimensions (full length)
Hello. I hope you may know the answer to this but I seem to not know where to find this information at. Here I go lol I started a side gig here in town with my own power washing business. I purchased a 225 Gallon power washer that shoots 4 GPM. I wanted to know if you knew what the ratio solution to water would be? I thought it would tell me when I bought it but guess not :( Thanks for your time!
If you are referring to a chemical injector attachment (link at bottom) it draws 18% chemical to a 82% water ratio. That's a standard chemical injector. If you are asking how much soap or chemical you should be using, we always recommend following the manufacturer's recommendations.
spraywell.com/general-pump-100775-high-draw-fixed-chemical-injector-fully-assembled-3-5-gpm/
What would be the smallest buffer tank you would suggest using with this machine?
125 gallons
If not this, would you recommend the 5gpm 3000psi for the concrete surfaces?
Yes
It's not enough psi.
This unit actually cleans concrete just fine
Hi,
Does you company sell the blue oil drain tubes (pump & engine) ?
If so can you link it.
Thanks
Is it possible to purchase this unit without the engine?
comet tws 8035 pump available all over the interweb. I just looked.
It is powerful enough for cleaning a pigsty?
Hey there, This unit is designed for house wash & soft wash applications. We would recommend a higher PSI unit to clean a pigsty.
I can do the same thing with my 13 hp 5 gallon a minute and it looks like the same amount of water flow as mine
Right but check this out, it’s another 3 gallons per minute 🤗
Math is hard.
Who doesn't use SH?
Sodium hydrochloride homeowners called it bleach LOL
I wasn't even trying to break balls is there anything out there that works close to sh?
Sorry I misread your post I thought you meant what is sh yeah there's somehow nurse. Just don't like Clorox maybe cuz they're allergic or Eco people so you kind of have to swing with a different chemical and just hit him with that upcharge😉😉
@@newwavepressure6478 and I was breaking balls lol but gotcha never found anything you could clean with without using pressure and I for sure as hell ain't cleaning houses with pressure
@@TheMhowi007 yea thats y i got my soft wash sys times are changing
How much for the machine
7 months and no answer here. They must not be proud of this product 🤔
$2,160
@@jmccOutdoors prices change
Why wouldn't the unit be suitable with using SH?
honestly It would, it's a downstreaming monster. Worst can scenario is your hose would have to be replaced every 2 months or so
Why would your hose have to be replaced every 2 months? I think this unit was not represented well in this video at all. 10gpm, high volume low pressure is house washing 101. How is this not comparable to an ar45 or whatever those “roof pump” guys are using?
They say if you don’t use SH it’s a good pressure washer that means that pump is cheap it’s made of metal that will break down from SH also known as chlorine or bleach for people that don’t know what chlorine is. Good pressure washers have fully ceramic pumps that way they will last for a lifetime and if you store them they won’t break down.
Chlorine or SH is extremely aggressive to ANY metal components. There is no pump I've ever seen in my life that is "SH" proof. The most resistant pumps to SH are designed for that specific application and are NOT pressure washer pumps. This unit has a COMET pump which is known for quality and manufactured in Italy. The ceramic parts of pumps are the "pistons" which are always made of ceramic.
Or…. just use a chemical injector.
There you have your answer, maybe now you will stop talking sh** about things you don’t know.
SH never flows through any pump unless you’re an idiot, that’s why he refers to downstreaming. The hose will be the only component exposed to SH…
Pumps are not fully ceramic, the only components that are ceramic are the plungers. Sounds like someone hasn’t been inside of a pump and likes to spew on about equipment they have very little knowledge about.
Why would this be good for house washes and not concrete? I was always told a 8gpm is a beast on concrete
The psi is 2000-2500 pretty low
I bought this thinking it’s good for concrete
India shoping
The gpm guy who swear its the only thing that matter needs to get one use it concrete so they see its more than gpm.
This seems highly dubious. There's just no way this makes a legit 8 gpm at 2500psi. Those Honda engines only make 11.7hp, not 13; you run up against basic laws of physics trying to run x amount of water with y amount of energy input. I'd really like to see flow and psi gauge numbers on this, as I'd bet one jelly donut it's not getting over 2000psi in order to see 8gpm flow.
I appreciate your comment, We aren't the manufacturer and I regret not having a gauge in the video but we definitely were able to produce somewhere between the 2000 - 2500 psi range.
Pulley size
I own this machine, but I bought it somewhere else. I get 1800 PSI tops. And at 1800 PSI that engine really struggles. It's deceptive adverstising and I regret buying it.
@@mayorofbasedville7680 that's what I thought. The people who market this stuff just take advantage of newbies that don't know any better.