How To: Remove a Belt Drive Pressure Washer Pump
Vložit
- čas přidán 25. 07. 2024
- How to remove a belt drive pressure washer pump. How to Remove the belt on a belt drive pressure washer. Step by step instructions on how to remove a belt driven pressure washer pump. For more information visit www.jnequipment.com .
- Jak na to + styl
Nice video, thanks for explaining how to remove the pump.
thanks for the vid!! the pool-ee huh not a pull-ee
Great Video Thank you for you time 👍🏼👍🏼
Looking at my skid, the bolts holding down pump behind the shield look about impossible to get to, but I don't want to take off engine pulley like you said and have to remove entire shield, but heck, unless the bolts can be taken off from under the skid?
it's 24 hp skid and 8.5 gpm 40 pound pump, shield is hella in the way of getting to the back pump mount bolts at all on top of skid plate
Good video.
Great video
GRACIAS AMIGO FOR THE VIDEO
Great video! I bought a hot water unit. Would this be the same process? Thanks
do you have any videos on poly chain assembly ?
Nice video. Because of your videos I going to replace my 3000psi 3.5gpm General pump to a 4000psi 4gpm Cat pump. I'm going to purchase the Slap Happy one that's already plumbed. Would replacing the pump be fairy straightforward? Do I need to know stem demenions before ordering and does your company cover any warranty issues or would I be referred to another company if a problem arises? Thanks.
great video any tips on getting that fly wheel off if its doesnt want to budge, I am afraid of braking a screw
use a loosening agent like PB Blaster.
Great thanks
Where can I find this pulleys??
where can i get a set of those pulley bolts
Can you tell me the part number on the bushing and pulleys?
Heyy where can i buy the pull-ee kit with belt
How do you put the belts back on?
Do u have the video of how to properly put it all back together and set the tension bolts correctly?
Hey Chris, currently we do not have a video showing that process, but we'll keep that topic in mind for future videos.
Hi, please help me, can u give me dia of both pulleys and where can i buy from, thanks
hi there, i know this was a long time ago but do you know were i could get them pulley and bushings from???
GRAINGER or small engine shops
You made a statement about reinstalling the pump on this very machine in a follow-up video but this video doesn't exist. Was you unable to reinstall it and sent it out to be installed or simply chose not to make the video?
Hey do you guys by chance know how I could go from a bare gx390 to a belt drive machine? I know I need a pump the pulley system is what I'm stumped on no where seems to have any parts for one besides a belt maybe
I found one from Power wash store, part # KDR-326 for a 13hp GX390 and a General Pump 5535 talk to alex
How to Remove a Belt Drive Pressure Washer Pump Video! Step by Step directions how to remove your belt from your belt drive pump and how to remove the belt drive pump also!
What type of pulley or brand is the one you took off?
I tried to remove the large pully but my bolts broke inside the holes I drilled them out and I still can't get pully to come off
2 questions. Can you install belts without removing or looseining pump? Next question after a pump replacement how do you make sure both pulleys are properly alligned?
Jason Smith Thank you for your question! Yes the belt can be installed without completely removing the pump. In this video the last 2 very long screws that I removed are referred to as "tension" screws. when you back those out while the pump is still connected it will relieve the tension on the belt allowing you to remove and reinstall the belt without having to take the whole pump off. Also sometimes if you look at the frame of your pump(the 'L' shaped metal brakets) one of the bolt holes may be a long hole which once you loosen these bolts will also allow the pump some play. As far as keeping the pulleys aligned that's a bigger question. The Motor pulley shouldn't be moved for the most part, do not loosen any engine bolts or that pulley. Instead we're going to focus on the pump side pulley. As your tightening your pump down and re-applying tension you probably have noticed the entire pump wants to shift toward the pulley(pulley pulls back toward the engine). The answer to this is a balancing act of sorts of loosening the L shaped brackets and tension screws and slowly tightening and readjusting them as you apply tension to the belt. You should be able to counteract the pump and pulley wanting to move this way. Good Luck!
Jason Smith would like to know that too
mark c i have done it a few times since. no need to remove pump. you can get the belts on with a little "work"
i was wondering if a belt "tensioner" is even needed. i have a 690 and tsf2120 pump. it has dual V belts
Mine has 3 v belts and there are "tensioners" under the pump
how do you adjust the tension on the belts?
some pumps have tension adjustment bolts underneath them, otherwise you have to use the position of the pump itself to adjust tension.
Were can I buy the 3 belts to replace them? I cant find them,
Bring the old belts to a store that sells belts. Usually Napa auto is good with matching up belts. If you don't have a store locally, you can measure the belts, width and length, and order them online. They are just generic belts.
Q. 1) What is the RPM of pump and engine
Q. 2) What is the ratio of the puley
🤔🤔🤔 Im Thinking ??