9sec Turbo Mustang Walkaround & Giveaway #2
Vložit
- čas přidán 13. 10. 2022
- Alright. It will be a very busy next few weeks. We are getting things ready to go done the track and hit up the largest fox body mustang show in the country.
Don't forget to put your comments in for the first 1/8Mile pass. - Auta a dopravní prostředky
Ohhyeah slamming gears luvin it... my 86 notchback has the 4 speed manual transmission and I've kept the 2.3 in it because I've always wanted to do what you have all done.. lol I've been picked on for yrs because I won't v8 my pony..
I don't even know how to drive an automatic. 😂
Parabéns pelo carro.estou querendo montar um motor deste para meu carro .até hoje não vi aq no Brasil,e não existe loja performance deste motor .vc tem contato de quem tem comando roletado molas e balancins roletado para turbo arrancada obrigado top.
Wow....nice transmission.........;)
6.52 is my guess even though I want it to be faster 🤣. I’m okay with being wrong if it does go faster! Let’s go
Wonderful. Any information on the block off plate for the remote water pump?
Love my T-shirt, o-ringed head? If not blown head gasket. Yes 7.5, oh I said before too many variables on last contest so disregard my blown head gasket and time.
Thanks Matt
Chuck
6.77 @ 102 sounds good to me
Have you ever had any issue with the starter going out continuously after hooking up mega squirt??
6.86 we all know the cars been into the 5’s in the 1/8th. If you took the doors off it may go deep into the 5’s haha😂
is that a solid lift cam then?
You use the stock distributor or converted to coil packs?
You have a 5 speed sounded like your Dino pull was in third gear. What gear is your 1 to 1 ratio including your rear gearing and tire rollout. Thanks.
Great questions!!! 💪 This trans is sort of an oddball. 1st is 3.25, 5th is 1:1. Rear gear is 4.10, tire is a 28x10.50 and I think they rolled out to about 88". Dyno was 3rd gear. I just needed to make a quick pull to see what would break or fall off since it was a brand new engine setup 😂
6.3
7.11 102
Off the trailer 6.98
6.73!
7.12 @99
Nos setup please and why you need it and what shot you using ?
That was a homemade setup with NOS parts. It was jetted for about 80whp but added 98whp on the Dyno. I've still not sprayed it on the track for a good pass. I'm hoping to add it to boost at some point.
6.82
6.68
6.78@ 104
6.94
6.83
6.93
7.14 at 101
7.01
6.13
6.01
7.12
6.80s🤟
6.92@98.64
6.33 108
6.89
6.32
6.71
6.96 1.8th
How is you heads set up
If you go back to the engine build vid it's talked about there. It's a Boport cyl head.
6.99
6.62 @ 108 😂
6.88
6.93 @ 93 mph...
6.76
What ar is that s366? 63 or 68
This one is a S366. I will probably go to a s369 next.
7.32
7.43s
7.02 best. The fisrt run will be slower
6.63 101mph
6.75
7.78 sec
6.69
7.99 mph 101
Hmm. You going to unload your suspension and spin. Sooo. 9.3 @ 92 mph
7:33 102 mph
To bad that esslinger stuff cost an arm and leg!!!!
6.94
6.81
6.79
6.45
6.31
6.66
6.53
7.37
6.84
6.48
6.54
6.78
6.35
6.28
6.58