2019-2024 Chevy Blazer Bumper Removal (how to)

Sdílet
Vložit
  • čas přidán 9. 07. 2024
  • Many reasons you may have to remove your Blazers front bumper. From headlight swaps, grill swaps to even changing out the bumper in its entirety. Todays video I will walk you through how to do it! Found it helpful let me know by smashing that like button and consider subscribing for future Blazer videos!
    Wanna help support and get badass merch check the link below! Shop 👇
    Links to car parts -www.amazon.com/shop/thesnyds
    www.etsy.com/your/shops/hasap​...
    Merch - shop.spreadshirt.com/thesnyds​
    #chevy#bumper#blazer
  • Auta a dopravní prostředky

Komentáře • 63

  • @remickpalenciatinoco3776
    @remickpalenciatinoco3776 Před 2 lety +4

    I don’t have a Blazer but I still like watching your videos

    • @TheSnyds
      @TheSnyds  Před 2 lety

      Haha thanks! Maybe one in your future?

    • @remickpalenciatinoco3776
      @remickpalenciatinoco3776 Před 2 lety +1

      I love how I was just watching your videos today on the Ralliart GFB BOV and then I get a notification saying you liked this comment. What are the odds... I wish I had a more direct way of communication. I have no social media. 😕

    • @remickpalenciatinoco3776
      @remickpalenciatinoco3776 Před 2 lety

      @@TheSnyds No Blazer even though they look really nice. I fell in love with the Tesla Model Y. Now I want to start working on the Ralliart.

  • @johnnief654
    @johnnief654 Před 10 měsíci

    Hi,John here I just want to thank you for your enlightening video. Someone hit my right headlight. I was going to pay the dealer to do it until I saw your videos. I am pretty handy with repairing things. Your video on how to remove the grill was on time, crystal clear and very instructive. The dealer wanted at least 2big ones. All of the questions that I was asking myself you answered. Now to get the light assy and I'm all set. The only thing that I need to know is how to replace the headlight bezel. The mechanic who inspected the light, yanked on the bezel and broke one of the clips on the bezel. I'll know more when I get into it. Once again a million THANKS.

  • @Todd-dy5tu
    @Todd-dy5tu Před 3 měsíci

    Now if you just add the putting the bumper back on! It's more of a hastle than taking it off ^) Great video

  • @antoniopina8150
    @antoniopina8150 Před 2 lety +4

    Love your videos. Helping us figure out this car for future reference. I have a 2021 lt3 blazer

    • @TheSnyds
      @TheSnyds  Před 2 lety

      Thanks for the feedback! And nice lt3 have the cool options

  • @raygood3454
    @raygood3454 Před 8 měsíci

    Thank you. This video was very helpful.

  • @jamesstewart6986
    @jamesstewart6986 Před 2 lety

    Do you need to remove bumper to replace headlight bezels? Thanks for any input!

  • @andrewdanielski8466
    @andrewdanielski8466 Před 3 měsíci

    @TheSnyds Where did you find the instructions you are following during this video. I would like a copy of them if possible.

  • @baba_2072
    @baba_2072 Před 2 lety

    Hi, thank you for your video. I have a question for you. Is it the same process for the 2021 Chevrolet Trailblazer LS? Please need your Help....!!!

  • @lawrencegutierrez
    @lawrencegutierrez Před 2 lety

    Do your tires still have the superwrap on them from your video you did on them a while back? If so how are they holding up? From the video they look good but just wondering from your up close view and personal experience with them.

  • @kc62474
    @kc62474 Před 5 měsíci

    Thank you for the tutorial.

  • @joshuaparson5423
    @joshuaparson5423 Před měsícem

    Can you replace the 22 blazer rs grille with a 23 rs grille?

  • @antoniopina8150
    @antoniopina8150 Před 2 lety

    Should do a video on how to replace headlight bulbs next. Would be nice for future reference.

  • @wmg-yuugotsaucedgraves9548

    I have a 2021 trailblazer and i need help removing the chrome bar

  • @petrocksgarage
    @petrocksgarage Před 2 lety +2

    Great hot-to video. Maybe I missed it in the video, but what made you want to remove the bumper in the first place?
    btw, that black cross piece just underneath the grill, did that come black from the factory? Or did you get it painted yourself? I have the same truck, white/black '21 LT2 sport package, but mine is white, not black. Also, there is a gray plastic piece at the very bottom of the bumper. Its black on your truck. Do you have that painted as well? Just curious. Thanks.

    • @TheSnyds
      @TheSnyds  Před 2 lety

      It came stock with the gloss black. But I removed the bumper for future knowledge. Plan on changing headlight bulbs and different grill inserts

  • @princeali9374
    @princeali9374 Před 2 lety

    Hey man you're the only one I know that removed his bumper. I recently had to replace my wiring harness and can't figure out where a connector goes, I was hoping you might know

  • @texasfan8892
    @texasfan8892 Před 2 lety

    I have a 2022 Blazer 2LT and I'm wanting to change the grille bar for either a black one or, if possible, a body colored one (iron gray metallic). Is it required to remove the wheel liner, fender trim, etc. to take the grille off?

    • @TheSnyds
      @TheSnyds  Před 2 lety

      From what I saw I'm gonna have to say yes. It seems like a lot, but if you didn't do it you would prob take even longer trying to find all the tabs etc

  • @i_sling_metal9338
    @i_sling_metal9338 Před 2 lety

    I removed my bumper and now the top corners stick out over the fenders. I did replace the clips to see if it helped. Still nothing. Help !!!

  • @crazychicken14
    @crazychicken14 Před 3 měsíci

    Thanks for the video. There is not much out there for the 19+ Blazer. Does this need to be removed to change the radiator? I have a leaky one and thinking of doing it myself.

    • @Reap45
      @Reap45 Před 2 měsíci

      Your 2019 has a leak. That’s scary because I just go my 2024. How many miles does it have on it

  • @billcory7106
    @billcory7106 Před 6 měsíci

    Does this Blazer have the "Distance Sensing Module"? It is used for cruise control and adaptive cruise control and maybe the auto headlight dimmer. Wish I could find a manual on what all the difffernt sensors do. Mine needs to be looked at as I was told the bracket holding the module is cracked and needs to be replaced. Geez, I barely bumped an embankment and I can't believe it broke the bracket. Hardly noticeable on the bumper that I hit anything. If the module needs to be replaced, I will have to recalibrate it, which I don't think I can do. Also, where did you get the printed instructions on how to remove the front bumper?

  • @johndyess8770
    @johndyess8770 Před 2 lety

    Do you know how to take the front grille upper molden (trim) left and right off?

    • @TheSnyds
      @TheSnyds  Před 2 lety

      Yes you just have to unclip from the backside. You'll have to remove the bumper for that

  • @PHANT3M
    @PHANT3M Před rokem

    Any chancw you could do a video of removing the tailights?

  • @rhondao7159
    @rhondao7159 Před 2 lety +1

    I watch your video where you removed the Blazer bumper and mentioned that the grille chrome could be changed.
    My repair shop said the chrome around the Chevy bow tie is “not” interchangeable.
    Please advise if you were able to swap out the chrome in the grille assembly
    THANK YOU!

    • @TheSnyds
      @TheSnyds  Před 2 lety

      It can definitely be changed out. They were either being lazy or just unaware.

    • @rhondao7159
      @rhondao7159 Před 2 lety

      @@TheSnyds
      Turns out my repair shop was able to swap out my grille inserts after inspection.
      Let me know if you have a subscriber that might be interested in buying the chrome parts that were on my new grille assembly.
      Have A Great Day & Thanks Again!!

  • @BEast-oy6rh
    @BEast-oy6rh Před 2 lety

    I want to pull my bumper to install a color matching grill bar but I'm nervous to break clips. How flimsy are they? Do u think a person that's never done this should attempt this?

    • @Reap45
      @Reap45 Před 2 měsíci

      You need to be at least mechanically inclined to do this and take pictures as you pull things apart in case you forget

  • @carlosaraujo1442
    @carlosaraujo1442 Před 2 lety +1

    How did you remove the front license plate with out removing the bumper?

    • @TheSnyds
      @TheSnyds  Před 2 lety

      I live in Florida so it's not required. Never had one on

  • @daveholte7658
    @daveholte7658 Před 2 lety

    Great video Question Have you seen anyone use 3 M Black Vinyl to 'Blackout' the Black Chrome piece in grille? Thanks

    • @TheSnyds
      @TheSnyds  Před 2 lety

      I haven't but I may be wrapping mine in the future

    • @daveholte7658
      @daveholte7658 Před 2 lety

      @@TheSnyds what product would you recommend?
      Same glossy you did both your sides by rails?
      It looks like it would take a 7’ long piece
      But don’t know what brand of product to get. The Black Chrome looks terrible and has lots of rock chips from previous owner. Thanks for your work on YT videos

    • @TheSnyds
      @TheSnyds  Před 2 lety

      @@daveholte7658 I've only ever personally used vivvid vinyl and then recently vinylfrog. Both were about the same installation wise. Vivvid lasted very well for years and didn't harm my paint underneath. Vinylfrog I can't speak for long term just yet

    • @daveholte7658
      @daveholte7658 Před 2 lety

      @@TheSnyds thanks I did apply a Amazon purchased Vivid vinyl to a Chev Colorado and it came shipped and product was severely wrinkled. cardboard Tube was even bent and had to send back

    • @TheSnyds
      @TheSnyds  Před 2 lety

      Ahhman. Sorry you had that happen. Hope they made it right

  • @stevenicholson4545
    @stevenicholson4545 Před 2 lety +1

    Great Video, where did you find the Instruction sheets you showed and how long did it take you to uninstall it?

    • @TheSnyds
      @TheSnyds  Před 2 lety

      A member off of a Facebook group. I'll try and get that file to save somehow

    • @stevenicholson4545
      @stevenicholson4545 Před 2 lety +1

      @@TheSnyds Perfect, it will help me out as I'm going to be installing my newly purchased Black front grill Insert Bars. I also found the Start Stop bypass plug (harness) for the RS also if interested.

    • @TheSnyds
      @TheSnyds  Před 2 lety

      Awesome! Yea that annoys a lot of ppl

    • @carmike692000
      @carmike692000 Před 2 lety

      @@stevenicholson4545 I would LOVE to know how to disable the start/stop on a 2020 Blazer if you have info on that!!

    • @stevenicholson4545
      @stevenicholson4545 Před 2 lety +1

      @@carmike692000 Sure, I had purchased the (SmartStopStart) Eliminator for *Chevy* from them on line. It's virtually a plug and play installation that takes about 5-minutes.

  • @DanielleSmith-kb2ud
    @DanielleSmith-kb2ud Před 2 lety

    Unrelated… I’m looking for a link for LED headlights

  • @emirferatovic8659
    @emirferatovic8659 Před 2 lety +1

    Can you do a video of how to replace the headlight bulbs

    • @imrf
      @imrf Před rokem

      I second this. It seems the projector bulbs might need the fender liner removed to access them, hard to tell in the video since the door was open washing out the camera.

  • @DROPD_94
    @DROPD_94 Před 2 lety

    Can you do a video of changing the brakes for the blazer

  • @Juan-jn3dl
    @Juan-jn3dl Před rokem

    where did you get the instructions to remove the bumper?

    • @TheSnyds
      @TheSnyds  Před rokem

      A member in a Facebook group. Not sure how they got it though

  • @CurtisADavis-bq3hq
    @CurtisADavis-bq3hq Před 2 lety

    Batting 1.000, it worked out for me so I could replace the H.I.D. Headlights with LED

  • @Shneedz
    @Shneedz Před 2 lety +1

    Where was the pop clip remover when I needed it😅🤣

    • @TheSnyds
      @TheSnyds  Před 2 lety

      Buried in the tool box lol

  • @ToxicGreen150
    @ToxicGreen150 Před 2 lety

    LT4 swap the blazer

  • @cper7751
    @cper7751 Před rokem

    Nice vids!! Thank You
    I surprised nobody is selling a pair of fog lights for those flat covers on the lower fairing that protects the bottom of the radiator. (There’s an optional engine block warmer that they run through the passenger side flat cover) part # 84555119 is without warmer hole

  • @baba_2072
    @baba_2072 Před 2 lety

    Hi, thank you for your video. I have a question for you. Is it the same process for the Chevrolet Trailblazer LS? Please need your Help....!!!