HOW TO HANG TWO GATES PERFECTLY LEVEL (WITH EACH OTHER AND THE FENCE)
Vložit
- čas přidán 18. 11. 2021
- Ready to see the trick to hanging two gates perfectly level with one another and with the fence? Here’s how I do it. With gate jacks and my gin pole I can hang two very heavy custom 4-inch pipe gates to the pipe fence by myself on-site. Gates jacks are handy rather you have help or not and the best way to hang perfectly level gates. Hope you find this helpful and enjoy the video.
Quick details: Two 4-inch custom pipe gates for a 12” overhead entry with connecting 6-inch post & five 4-inch rail pipe fence
TEXT ME - (405) 643-7176
Gate jack & Gin Pole digital prints: www.arosswelding.com/shop?cat...
SHOP AT AROSSWELDING - www.arosswelding.com/shop
My favorite tools & gear - www.arosswelding.com/shop?cat...
------------------------------------------------------------------------------------------------------------------
This build series playlist: • Big Pipe Fence Project
More Pipe Fence Videos:
8” Custom Pipe Entrance - czcams.com/play/PLy.html...
------------------------------------------------------------------------------------------------------------------
AROSSWELDING TRADESCHOOL - www.arosswelding.school/
Free Course Example - www.arosswelding.school/offer...
------------------------------------------------------------------------------------------------------------------
Free Resources - www.arosswelding.com/resources
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
JOIN THE INNER CIRCLE: arosswelding.mn.co/landing/pl...
Details about the Inner Circle: arosswelding.mn.co
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
AROSSWELDING.COM - www.arosswelding.com
NEW CHANNEL WITH QUICK TIPS AND TRICKS
AROSSWELDING SHORTS - czcams.com/channels/sPG.html...
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Social Media links - come hang out after hours.
My Instagram: / arosswelding
My Facebook: / arosswelding
Our vlog channel: / austinandkayla
I love that beefy 4" pipe look! Makes me want to put a frontage fence up on my property I wish steel prices weren't so high right now
Man I love your attitude and positivity been welding for 12 years but just went back to school to get my associates degree I have 7credit hrs left and guys like you are a true inspiration great job
250
Worked with a guy named Porkchop on a compressor station about an hour south of OKC. Y'all have the same light hearted helpful mentality. Porkchop helped me become the best fitter I could be just by having a little patience and love for the trade. Appreciate the kindness of sharing brother!
Sharp looking entry! The massiveness of the entry, the gates and the fence are so well proportioned. The owner must be super pleased!
You are clearly loving those new brass dice!
Freaking awesome!! I build alleyway and coral panels out of old boiler tubes. By watching you I’ve learned a ton bro!! Thanks for letting us tag along!!
Hey "A" man, yet again, great looking work. You don't need me to tell you that, If it wasn't perfect, you have not let it go. Hood down lights on.
Us welders must stay tight together !
Thank you for sharing Austin!
nice and tidy , those gate jacks are great ,,, mind you , I would have wanted a closer on the top of those two hinge plates to box it off and leave it looking as solid as the gates themselves.
One of my biggest inspirations thanks for all the great educational experiences I’m working on building a truck as we speak
Once again beautiful work true craftsmanship from one brother of the hood to another love watching your videos keepem coming
Great work, I just do welding projects around my farm but you inspire me to take on more complicated projects.
Thank you.
I really like the way you went back and added the extra "tab" on the hinge braces. That shows an attention to detain and extra insurance against any deformation on the hinge areas. Small addition; probably great addition to the strength of the hinges for those heavy gates.
Just built some fence the other day I like how you say sometimes if it level and square it looks off definitely true with the ground sometimes!
Hey A you getting better at those big gate entryways that one come out real nice and I figured about 500 a gate give or take a few pounds plus the weight of the weld .don't forget that
Thank you teach so much for being so perfect I just started going to school for welding really look forward to finish thank you for the extra help👍🏼👍🏼up💯🙏
Fence and the awesome gate looks bjiiiiuuutiful. Welder from Finland :)
I just came across your video's & I am digging all of the video's I have had a chance to watch!! Just started my own welding company during the middle of this year & I have already seen and heard thing's in your video's that I am definitely going to incorporate into my own approach's and build's in coming project's. Thank you for your positive & optimistic advice, really help's make me & I bet other's out there that are subscribed or have viewed your video's, forge their path's to find what work's best for them & or sharpen up skill's they/I have already with the pointer's/advice you share.
You bet! Thank you for watching and taking the time to share this message!
You are super meticulous!Excellent work!
Really nice looking gates thanks for sharing
I was fortunate enough to have a couple fellas that had been fitting pipe together for 40+ years to reach me how to lay out and properly fit pipe. I didn’t realize how lucky I was at that young of an age to be blessed with such knowledge. I wish I had payed more attention than I did. I know I tried as hard as I could to soak up all of the knowledge that they tried to convey to such a young “hot headed” welder that thought I knew everything. I guess they must’ve seen something in me that they didn’t see in a couple other guys we wotked with. They were top notch and have both passed and are probably hanging iron for the big man above. NJ and RS will forever be looking over my shoulder like they always did. I remember it being comical to see in the reflection of my hood at how they’d be sneaking up behind me while I was laying in a root but as soon as I’d go to raise my hood they’d act like they weren’t watching. Lol watching your videos brings me back to those early days. Keep on keepin on brother. Your doing good things. I hope these folks appreciate the effort it takes to teach such a thing. There’s slot more going on behind the scenes than you care to admit I’m Sure.
Now that's a entryway right there buddy. That looks pretty good.
That is one stout gate. Nice design. Modern . Like it.
Very sharp fence system.
Thank you so much for you advice in in methodology of attaining your goals in life ive always thought that way in my life since I was young and the last 8 years and a few months has really thrown me off track since i had to have my leg amputated above my knee i have a almost 12 year old who is keep me going but i need to try to better myself and get back on track for him being a single father and doing what I can to get him everything he needs to succeed and do good in school anyway thank you.
Fantastic work!
Looks great Austin. You did a great job and it worked out and fit like a glove. Stay safe and have fun and fellowship on Thanksgiving. Fred. 🙏🏻🙏🏻👍🏻👍🏻👏🏻👏🏻✋🏻✋🏻
That gate will be there when were all dead n gone!!! Great job AR
Great job !Definetly want a couple of those welding shirts
love the show. bet he making as much if not more doing this and staying at home then working the pipe lines
Awesome video Austin 😁
Loved it! I called it at 450 lbs! and I enjoyed you calling it at 450-460...
Level with the world, nice.
Beautiful!
If you have a portfolio for potential clients, this should be the 1st page. Looks awesome and will last for generations.
Any idea if the client is going to paint it or anything?
Thanks for coming to Morrison today 👍🏻
Thanks for having us! And thanks for listening!
Hey man thanks I just got on my pipeline job bc I went off what you said to do it work's good n if you ever need anything help let me know I live in Oklahoma
Dope video👌💯
Thanks !
Great job and I believe you were trying to say you hang your hinges level so your gate swings level. Nothing like having a gate that swing into the ground
It’s nice to see someone that takes pride in the work. Is there any reason you don’t weld completely around the top of the hing stops? Would welding around the top not help with sealing it off from the elements so it wouldn’t wash down the steel and wash the grease out of the hinge? The pressure between the hinge and stop will makes a good enough seal. You might of welded around it and I haven’t seen it yet. Just curious.
As long as they don’t forget to close and lock them the elephants should never get out.
Great looking and nice job.
Life time guarantee + 10 more years beutiful work.
Well said, let me add to yoyour choices determine your priorities, and your priorities determine your choices. !
Never made gates for an Elephant Ranch before.👍
That’s funny!
My friend Justin Plummer in California made the fence and gates for the animals (lions, tigers, bears and elephants) at Performing Animals Welfare Society (PAWS) in San Andreas. They look very similar to this entry only taller with wire mesh.
Austin this job should get you lots of referrals, it’s spectacular!
nice gate
Right on
I could not see if you did but suspect you welded some stop strips beneath your slip pipe hinge around the vertical hat posts to keep them from dropping. I have a suggestion for future builds but it’s kind of hard to describe. I’ll give it a try. On the upper/top side of your hinge pipe weld a like sized piece like on the bottom of the gate’s pipe hinge piece above the hinge pipe on your gate’s hinges then weld a slightly larger pipe shroud around allowing it to protrude just enough beneath the upper rim of the gates pipe hinge to form a rain shroud/shield to keep rain and freezing water out of the hinge and find a good place to insert an alimite/zirc fitting on each hinge pipe to allow the hinged area to be greased occasionally.
excelent job, I think the gates are 600 punds each, thanks for share
Great work! I learn a lot from watching your videos. One question… how do you account for any sagging after you remove the gate jacks? Do you get any sag after you remove them? If you do is it through experience that you account for it before you weld the hinges or is there some way to adjust?
i dont think there was even a smidge of sag on that gate. that design is solid. If you watch the part where he lets the jack stands off, make note of the corner of the gate in reference to the tree branches in the background. There is no movement. That's the beauty of a well designed and built gate fabbed with steel. My bet is that this gate will be solid 50 years from now, the posts wont move either, because AROSS ROCKS!
You could make a stabilizing bar or V shaped device that could just be mounted with a pin to the gantry thing to keep the items from swinging excessively .
My guesstimation is 578 lbs.per gate,nicely done,youngin'!!
What electric automatic openers do you use on welded gates?
I literally just started looking up welding. I was electrician for a year but got f over by the boss, I don’t know much about welding but I would love to talk to someone who knows a lot about it. I just have simple questions like how long do you go to school for it? Do you work alone being a welder? How far do you travel in order to become a welder? I’m sorry if I’m asking simple dumb questions. It’s something I’m getting I interested about
hi Austin,i notice the strangest things, what make is the yellow chain block you have hanging in your shop? and does your brass button shirts come in blue? keep up the great shows, thank you. gene638
that is one beautiful heavy ass gate :)
Hey Austin, how are your main posts anchored to the ground? Thanks in advance!
Check out this video
czcams.com/video/R5iAVPcbUr0/video.html
Would you consider sending items purchased from your store to South Africa and if so, what would the courier cost be
Great work thanks the gate weight around 800 kg
Beautiful work ! Good sir. I’m guessing about 500lbs
Is there any reason why you don’t paint the fences or does the customer paint them afterwards?
Black Rifle coffee is bomb!!!
Great video hey i was wondering how much you charge to build a bed for my 95 obs ford f350
It depends on what all detail you want. Shoot me an email
Arosswelding@gmail.com
Nice work! You’re right sometimes though it’s about Prioritizing a list of things to do
And gittin er done lol sorry had to say it.
It’s a good feeling! Better that sittin on ur butt saying man I need to this and this.
Don’t put it off just do it. Oops I did it again.. crap and again haha anyway thank you for your channel cool stuff!
650lbs per gate. Looks awesome!.
Did you buy those hinges or just build them
What are you trying to keep out? Tanks?
30 seconds in and he talks about coffee....subscribe
Add approximately 10.58 pounds per foot and approximately 100 feet of pipe but 1058 pounds for the 2 gates
529 per gate
Do you ever clear coat finish products before install?
Great work nonetheless man. Just curious
Hey Austin I have a question not related to this video but how do they clean all the trash out of pipelines after construction? Seems like there would be a lot of junk in there from welding and cutting and all. Never heard anyone talk about that.
They run what they call pigs through the line with air. They run a number of different pigs through the line. They have different pigs, cleaning pigs, which are like big sponges that fit the certain size of pipe. They have a brush pig which is like essentially a big wire brush or several wire brushes to fit the particular size of pipeline. And then they also have what they call smart pigs to find defects or anomalies.
@@arosswelding My man. Thank you for answering and great video showing your attention to detail on the gates. Keep on keepin on, you are an inspiration to me.
They run a pig
I thought they hire small people to run inside and clean them out? Didn’t know they used pigs 🐖
what part of ok are y'all in ?
My guess on the weight
was 500lbs before you
told us how much thay
we're. That whole job
tured out Great.
How long have you been welding?
Wicked
Bro you need to get yourself a work shop forklift
Hay man I love your show you have inspired me to get up off my ass and build something I have a welding trailer I have done a 4 to 6 welding jobs over the years, I worked at a welding shop for 36 years I did not weld for a living I worked in the tool room for over 25 of the 36 years , I have resontly lost my right leg and my job so I have a lot of spear time I do a lot welding jobs for my self .I been welding sense 1982 I have a ranger 8 ,it's around 20 years old, I can't get enough of youal video, please text me back, my Nick name is jelly roll , I got it the first day on the job.
Next truck needs to have a service truck crane on it
From one welder to another, why did you use such heavy pipe for this fence project? That 4” Sch 40 is what, 1/4” wall min.? Not to mention the price for materials is up 200% or more in my area. Just wondering.
Thanks
Alex
AF Welding, LLC
Elk Grove Village, IL
It’s what the customer wanted
Yeah i priced some just a few weeks ago for a pipe feints job an it's insane on how much it would have costed them for it.
Если трубу привозить из Кореи, то да, цена вырастет и на 300%
250 lbs. And with the level on it 250lbs and 6 ounces. Nice work.
@@melvinmariott8609 what in the corn bread hell is a “feints”? 🤷♂️
That's a good-looking gate there. I say 862 lb
How do you find customers?
why is there no power winch on the crane?
Nice work! 310-350 lbs
You couldn’t rig a raffle haha only kidding 🏴
Where are you located ?
what do you mean whem you said level with the world?
If "The Price Is Right" taught me anything, I will say they weigh 1#!
Hey man what happen with you and the PIpeline
Forget one small thing it could hold up the whole job.
Are you from Oklahoma
I wonder what breed of T. Rex is going to be held by such massive gates, but it must be the nasty one for sure... Unless the customer just inherited a pipemonger warehouse and decided to have some fun with overbuild and oversized horse corral ;-) Yeah, this is America, and everything here has to be the biggest : )
We absolutely all would rather be In The Back of the Rig Working on a project. But some end up Saddleback daily.
Between 675 - 750lbs.
Looks like 4" OD, probably .25 wall. @ roughly 11lbs per ft. About 62' total.
My best guess and my two cents.
1000 Lbs
Appx1500 lbs each
Dang I was thinking about 450-500 on the weight them is some heavy gates lol
Remember to prioritize time for you, wife and family.
please make your new videos
That gate weight like 300 pounds??
682 each
👍🏻💵💵