How to Fix a Broken Box Spring for $5
Vložit
- čas přidán 11. 09. 2024
- Our less than a year old Box Spring Mattress frame broke in half where it met the bed frame. Rather than throw it away and buy new, I show you how to fix it better than new for about $5.
Email: TDMikeFan@gmail.com
Products:
Milwaukee Drill and Impact Driver Set: amzn.to/3t0WqtD
Milwaukee 95 piece drill bit and drive set: amzn.to/3DHeqiG
Titebond Wood glue: amzn.to/3fhc9Br
Wood Screw Assortment: amzn.to/3UcbOyP
The above links will take you to Amazon.com. As an Amazon Associate I earn a small percentage from qualifying purchases.
Music:
Song: LiQWYD - It Will Be Ok
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution 3.0 Unported
Video Link: • LiQWYD - It Will Be Ok...
Song: SKANDR - Blue Lemonade (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: • SKANDR - Blue Lemonade...
Song: Erik Lund - Tokyo Sunset (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: • Video
Great video, this helped so I didn't have to buy a new one this week. Fixed it myself, and felt handy, thanks to you!
I am so glad the video helped!
Very informative +dog= incredible video
Thank you!
Very simple and well explained video. Encouraged me to go ahead and fix mine this weekend! Thank you
That's great news! Thanks for taking the time to comment, I am glad the video helped!
Great video, i didnt want to have to go buy a whole new one.
Thank you - I am glad the video helped!
Mine
I have 2 horizontal boards busted. This will help. Thank you!
Good luck, it should be a straightforward fix - let us know how it turns out. Thanks for taking the time to comment!
Thanks for this.
Glad the video helped!
Do you happen to have a video on how to repair the frame of a chaise 😢someone sat down to hard and the wood on the side broke in half.
Hello! Unfortunately I don't, however the construction is likely pretty similar. I think the hardest part is probably going to be getting it disassembled enough to get to where the side that broke in half attaches to the rest of the chase. It's worth a try if you are up to it given the replacement cost!
What length wood screws did you use?
They were about 1.5" long
@@ThatDadMike Thank you!!
How would you go about replacing one of the horizontal slats?
I would approach it the same way. Depending on your box spring, you may be able to pry off each of the vertical slats where they attach to the horizontal slats you are replacing as they are generally attached with staples.
@@ThatDadMike thanks!
Do you think we can fix it
If the wood is broken on the side as well . We had gkids jumping on the bed
I think it's definitely worth a try! The construction may be slightly different but if you can fix it, it will certainly be less than the cost of a new box spring.
Ty
Sending my support here from lovetravelMusic😊
Thank you!
What if you reinforce it with more of those sticks
You can absolutely do that, it would probably help prevent it from happening even more.
Thanks
What size are the wood going across ?
Those are roughly 1" x 3"
What to do with 2-3 inch width wood?
That should work as well as long as it is the same thickness as the other slats so that your box spring lays flat on the frame
What if you don’t have a drill?
Use a more narrow screw and be careful it does not split the wood. You could possibly also use nails or staples. The factory often uses staples to hold the boards together
Thank youuuu!!!
Thanks for taking the time to comment! I hope the video was helpful!
Thanks
Great video, well done but here in Colorado, the wood will probably cost much more.
Is the a Tempur pedic boxspring?
It's a Sealey.