Spyderco Tenacious Disassembly

Please check out my other Spyderco videos:
• Spyderco Knives
Please check out my good friend Random Rob for some of the best and most watch content on CZcams:
/ b20ef
Also check out Desire 68 for some awesome watch content and how to videos:
/ @desire68frogman98
Want to help out the channel??
1. Watch, subscribe, like, comment and share this video
2. Email me if you’ve got a piece you might want to loan in for review to [e-mail]
Thanks a lot.

[@kare14drums]

My tenacious has the same issue with the squeaking

[@adamdelannoy9422]

Rule number 9:
"Always have a good knife with you"
Leroy Jethro Gibbs, Special Agent Supervisor

[@saleendriver]

I love these disassembly videos. Very interesting.

[@DirkWerning]

SaleenDriver thank you sir

[@badhombre8383]

I’m so fortunate that I live about 30 minutes from rivers edge cutlery. I can’t tell you how many times I had something in mind get it in hand and it’s a instant no. Even though that’s what I went to get in the first place. Nothing beats going into the knife shop and spending time with each one. The tenacious is an absolute value at its price point compared to my other spydercos and benchmades.

[@DirkWerning]

Yep that’s awesome. I agree getting something in hand is the best way to know. I’ve been pretty lucky with my purchases. Most of them I like when they arrive. But I’ve sold some quickly as I wasn’t happy after handling it and/or too much hype that I didn’t agree with.

[@cesarlavarello8060]

I remember back whenI bought my tenacious it was a 30 dollar knife....2013....crazzy what 10 years will do to the American dollar

[@DirkWerning]

Indeed.

[@aarenj4170]

I've seen some conflicting information online. Are the screws on the tenacious hex or torx? Thanks.

[@DirkWerning]

Aaren Johnson T6 and T8 torx

[@aarenj4170]

Dirk Werning Thanks so much!

[@MrBjsouthern]

Yes!

[@DirkWerning]

Brad Southern thought you might like.

[@GatorNick]

My pivot bolt is basically super glued on. Can't get it to loosen. Wonder if they used red threadlocker at the plant? Any tips?

[@DirkWerning]

Give it some heat. A hair dryer should be enough to loosen it up 🤞🏻

[@GatorNick]

Didn't think of the hair dryer. I'll give it a go. Thanks!

[@bigbadstretch13yrago]

@@GatorNickdid you manage to get your pivot loose on your tenacious?

[@GatorNick]

@bigbadstretch13yrago I did. Ended up having a below par star bit. Bought a quality metal one and it came loose quickly.

[@MailmanDownEDC]

Just Subscribed. 😁 I disassembled my Tenacious and cleaned it up. However, after putting it back together, my blade isn’t centered when closed. Any tips on centering it? Thanks.

[@DirkWerning]

South GA Bass and RC loosen all the mounting hardware including the pivot, hold the blade centered and then start tightening things up. Sometimes it takes some trial/error

[@MailmanDownEDC]

Thanks, Dirk. After I posted my question, I loosened up all screws with the exception of the 3 clip mounting screws. I closed the blade, centered it and started tightening the pivot screw and then worked my way back to the end tightening the rest of the screws. Worked like a champ. 😎👍

[@DirkWerning]

South GA Bass and RC awesome.

[@GGkcDQ]

THX ;)

[@Gooseygoose14]

Mine only had two washers, that normal???

[@Jonny-nf3ft]

Just imagine, carrying your knife tip down🙄

[@DirkWerning]

Haha scary thought right lol