This is Inevitable with project cars!

Sdílet
Vložit
  • čas přidán 8. 09. 2024
  • Todays video is about the struggles that come with owning project cars and being a car guy in general.

Komentáře • 59

  • @Shawn_42850
    @Shawn_42850 Před rokem +5

    That’s my therapy as well. I just finished installing a new cam in my coupe and there was nothing more satisfying than wrenching on it and then hearing it fire up for the first time.

    • @lollis_garage3683
      @lollis_garage3683  Před rokem +1

      Absolutely especially when you get to hear the cam the first time!

  • @triggersnob9722
    @triggersnob9722 Před rokem +1

    Definitely my therapy.... once she starts up and I hear her exhaust the smile on my face is from ear to ear!

  • @jordanvargovich
    @jordanvargovich Před rokem +3

    Love the build. I got a black 98 gt myself that I'm building. This yr is motor and paint work time lol

  • @jesusm7754
    @jesusm7754 Před rokem +4

    My battery used to die out alot too on my 94 looked up some forums and heard that the fuse link wire that runs from the alternator to the fuse box is infamous to go bad on the 94-95.I upgraded to the 200 amp alternator that comes with the upgraded fuse link wire from lmr and it works wonders, really recommend it.

    • @lollis_garage3683
      @lollis_garage3683  Před rokem +1

      Appreciate the info! 💪🏼

    • @TheModAddict
      @TheModAddict Před rokem +1

      Yea. Those fusible links can really suck sometimes.
      Also sometimes the alternators come painted silver and dont allow it to ground to block properly. I always sand the mounting area and there is a bolt hole on the back of the alt to add a ground which i always do as well.

    • @jesusm7754
      @jesusm7754 Před rokem

      @@lollis_garage3683 anytime

  • @scottsvt9104
    @scottsvt9104 Před rokem

    I noticed your headlight switch is missing. I always replace them with a billet switch that easily tightens with an Allen screw . You can get a black switch that looks stock. It’s better than having to use the crappy factory clip and plastic switch that falls off.

  • @2_Wheel_Waldo
    @2_Wheel_Waldo Před rokem

    Happy to see more uploads 💪💪 love seeing anything to do with onyx

  • @YdnGhost
    @YdnGhost Před rokem

    That light test check doesn’t test for resistance

  • @bradvaughan1409
    @bradvaughan1409 Před rokem

    My therapy car is starting to be a headache. I’m having a intermittent turnover with no start issue and I can’t hear my fuel pump. The only good thing is that the tank is low so it’ll be easier to drop it.

    • @lollis_garage3683
      @lollis_garage3683  Před rokem

      Don’t give up on it though and jeep wrenching!

    • @jasons6573
      @jasons6573 Před rokem +1

      Make sure you run power back to that fuel pump for a test before you go through all that trouble to drop the tank.

  • @TheModAddict
    @TheModAddict Před rokem

    I got 3 bad alternators back to back from O'REILLYs. There seems to be no quality control anymore.

    • @lollis_garage3683
      @lollis_garage3683  Před rokem +1

      I had the same thing happen to me from Autozone with ac compressors on a olds aurora and they were new not remans!!! 🤦🏼‍♂️ happens all the time at the shop dude it sucks

  • @jeremievaliquette2734

    Hell yeah cars are good terapy

  • @seangallagher455
    @seangallagher455 Před rokem

    Poor onyx didn't wanted the day off 😂

  • @awee5816
    @awee5816 Před rokem +2

    Have you ever had any issues with the E-cam along with you 11R heads since you got them?

    • @lollis_garage3683
      @lollis_garage3683  Před rokem +1

      I don’t have the e cam now but I never had any issue the car ran great!! 👍🏼

    • @awee5816
      @awee5816 Před rokem +1

      @@lollis_garage3683 thanks 👍 man. Good luck on your build 🍀

  • @VansenJenessa
    @VansenJenessa Před rokem

    CANADIAN SUPERMAN APPROVES

  • @dwarrenwilliams9938
    @dwarrenwilliams9938 Před rokem

    Have you noticed your battery dying more since you installed the sniper? My battery on my foxbody constantly dies since the sniper was installed. I think it’s drawing power when the ignition is off.

    • @lollis_garage3683
      @lollis_garage3683  Před rokem +1

      No not that I have noticed but I have a main cut off switch that I kill when not driving so idk 🤷🏼‍♂️

  • @rondobson8010
    @rondobson8010 Před rokem

    Do you think it would be possible to replace the head gaskets on a 95 like Onyx without pulling the engine?

    • @lollis_garage3683
      @lollis_garage3683  Před rokem

      Yeah you can do head gaskets with the engine In the car without problems it’s fairly easy as well

  • @darkmachine165
    @darkmachine165 Před rokem

    Just wait until you do what I did drop in that 351W..... Boy oh boy wrenches will fly! I've got it all in but wow was complicated.

  • @allentraylor5659
    @allentraylor5659 Před rokem +1

    Could you PLEASE, PLEASE ..... TELL ME WHAT YOUR "TIMING" IS USUALLY SET AT ???

    • @lollis_garage3683
      @lollis_garage3683  Před rokem

      Base 24 and wot is 34

    • @allentraylor5659
      @allentraylor5659 Před rokem

      @@lollis_garage3683 never knew why my shit seemed so slow.... Its set at 15°....
      Hope no one sees this.

    • @lollis_garage3683
      @lollis_garage3683  Před rokem

      @@allentraylor5659 now depending on what’s done to the engine you may not want to go that high, really depends of the mods it has

    • @allentraylor5659
      @allentraylor5659 Před rokem

      @@lollis_garage3683
      Gotcha....
      It's still EFI
      Anderson B31 cam
      Trickflow 11R heads on order.
      Electric fuel pump
      Longtubes..etc
      150-shot , later down the line

    • @allentraylor5659
      @allentraylor5659 Před rokem +1

      I love my car...
      You don't see many of them, out here.
      Chicago suburbs

  • @SilentMovements305
    @SilentMovements305 Před rokem

    I got a question I got an SN95 2v that has sat for a year when I bought the car the car would turn on tried to turn it on again and having issues wit the PATT system. Any suggestions appreciate it

    • @lollis_garage3683
      @lollis_garage3683  Před rokem

      It could just be lost communication from where the battery has died you may be able to get a new battery and leave the key in the ignition with the switch on for 10 to 15 min and see if it resets! Not 💯% sure it will work or you may have to take and get the patts key system
      reprogrammed

    • @SilentMovements305
      @SilentMovements305 Před rokem

      @Lollis_Garage I'll do that this weekend thank you for the reply. What battery you suggest? When you said reprogrammed you meaning go to a locksmith n program it. Thanks again for the reply.

  • @oscarvillarreal8951
    @oscarvillarreal8951 Před rokem +1

    What time do you get with Onyx in 1/8 ml. & 1/4 ml.?

  • @Rafa-og6xs
    @Rafa-og6xs Před rokem

    Yo what’s up man, I have a 95 mustang gt 5.0 automatic 😬 What would you recommend that I do to it I wanna get more power

    • @lollis_garage3683
      @lollis_garage3683  Před rokem

      Depends on how much power you want really 🤔

    • @Rafa-og6xs
      @Rafa-og6xs Před rokem

      @@lollis_garage3683 probably around 300-500

    • @lollis_garage3683
      @lollis_garage3683  Před rokem +1

      @@Rafa-og6xs for a little over 300 wheel youre gonna have to do heads cam and intake or just boost it and you can get it over 400 wheel pretty easy. Either way you’ll have to do supporting mods such as fuel system like injectors and a upgraded pump and a upgraded fuel pressure regulator Id recommend

    • @Rafa-og6xs
      @Rafa-og6xs Před rokem

      @@lollis_garage3683 alright thank you 🙏🏻

  • @PoorBoysRacingChannel

    Hey I’m here to say hey and interact with Algorisam

  • @ryanarment769
    @ryanarment769 Před rokem

    always something🤦‍♂

  • @79beans347
    @79beans347 Před rokem +1

    Comment

    • @lollis_garage3683
      @lollis_garage3683  Před rokem +1

      Appreciate you sir.

    • @79beans347
      @79beans347 Před rokem

      @@lollis_garage3683 🤣 yeah man appreciate you as well , its good to see you and onyx still at it. Im redoing my exaust right now im taking the single chambers with dumps off and going with side exits and bullets. Should be quieter in the car but louder on the outside hopefully