Your pickup has the 6R80 transmission which is completely different but replacing the filter is the same process. The 6R140 filter is bolted into place but the 6R80 just presses into place without bolts. The pan holds it in place. It will also have a small dipstick located on the passenger front side of case. Initial fill is 3.5qt, run engine and then check and fill accordingly to proper level. The last 6R80 I serviced took 6.5Qt total 👍
I have a 2019 E-350 box van (bought it from Penske with 80K on it). It has this trans in it. When I drained the trans about 10 quarts came out. Does that mean they had it overfilled? Thanks, Chris
2019 E350 is the TorqShift6 trans. Looks like it was overfilled. Make sure it's at operating temperature and double check the level. Maybe when the filter was removed more drained out? Here is refill specs: Fill the transmission through the transmission fluid filler tube. If ONLY the transmission fluid drain plug or pan was removed, add 7.8 L (8.2 qt) of transmission fluid. If the main control was removed, add 9.7 L (10.2 qt) of transmission fluid. If the transmission was removed and disassembled, add 15.3 L (16.2 qt) of transmission fluid.
Nice vid. I'd talk that fella into another spill and fill . That fluid was toast.👍
Getting ready to do it on mine and wanted an idea of what to do. Thank you for the informative video!!
No problem 👍😎
Another great vid. Are there any major differences for a 2013 F150 4x4 6 speed? I'm at 70K miles now.
Your pickup has the 6R80 transmission which is completely different but replacing the filter is the same process. The 6R140 filter is bolted into place but the 6R80 just presses into place without bolts. The pan holds it in place. It will also have a small dipstick located on the passenger front side of case. Initial fill is 3.5qt, run engine and then check and fill accordingly to proper level. The last 6R80 I serviced took 6.5Qt total 👍
I have a 2019 E-350 box van (bought it from Penske with 80K on it). It has this trans in it. When I drained the trans about 10 quarts came out. Does that mean they had it overfilled? Thanks, Chris
2019 E350 is the TorqShift6 trans. Looks like it was overfilled. Make sure it's at operating temperature and double check the level. Maybe when the filter was removed more drained out? Here is refill specs:
Fill the transmission through the transmission fluid filler tube.
If ONLY the transmission fluid drain plug or pan was removed, add 7.8 L (8.2 qt) of transmission fluid.
If the main control was removed, add 9.7 L (10.2 qt) of transmission fluid.
If the transmission was removed and disassembled, add 15.3 L (16.2 qt) of transmission fluid.
Was the color of that fluid normal for that many miles?
Yea. Mercon LV starts turning dark at 30K. Seems like the older Dexron III was better fluid than the newer low viscosity fluids.