CWD POND - Box welded liner, bottom drain and Pond Window install walkthrough

walkthrough of how we install windows, bottom drains and box liners
www.cwdsandbach.co.uk
contact us for supply only, supply and fit or general advice on your pond project!

[@keepingitkoi]

That's exactly how I've just installed mine and it worked a treat 👍

[@1973cashy]

I like it! Definitely going to use this method on the next project 👍🏻

[@cwdpond]

You should!

[@travisreed5810]

I wonder if liner repair tape would work well around the window with a more finished look?

[@brandonmonroe7050]

What sealant did you use here?

[@tospicy4ya]

Is box weld a better than liner but cheaper than fibre glass, how ease would it be to install a window in an established pond ?

[@dwaynewright1556]

Why dont you put the liner in the window recess first and put the window in after on top of the liner?

[@asdfghz]

Thankyou for the video, where did you pick up your pond liner from would like to order some myself

[@cwdpond]

We supply everything, message us via cwdpond.com for prices

[@aprilaandi9700]

How thick was the glass?

[@alexandruavarvarei]

How many cm is the edge on the concrete block?

[@Andrew-st2ti]

Brill vid I'm gonna do a box welded liner block pond around march time and not seen the blocks cut on other vids like this and was wondering if that could be done and you've just answered it I've emailed you for a quote on liner and a window

[@cwdpond]

Glad you found it helpful Andy 👍

[@Westwood699]

How long does it need to be left before you can fill after installing a window this way ?

[@cwdpond]

We advise 48 hours minimum

[@michaelcarvalho3686]

Can any glue be used to stick the pond linner?

[@cwdpond]

We reccomend mypond ms300

[@jessenewman1610]

Ive noticed the liner seems a little big should i order it say little smaller than the actual measurements of the pond ?

[@cwdpond]

If the pond is square it will fit perfectly, just supply as accurate measurements as you can for the best fit

[@MrKkdude]

We're they three glasses joined together?

[@serkantufekci4738]

Leaking looding :)

[@joeyates1377]

Why don’t you cut the underlay round the bottom drain, before fitting the liner?

[@cwdpond]

Hi, by the time you've got the liner in after it tends to move the underlay a bit, it's not very hard doing it this way and saves taking it all out and getting creases in underlay if you mess it up.

[@joeyates1377]

@@cwdpond fair enough 👍

[@karljepson6560]

When I used underlay on mine I cut it around the bottom drain first then used sorry glue to hold it in place worked a treat 👍🏻

[@TomAllen88]

Why use sealant on the flange? It's not holding any water back surely, that's all taken care with the join between the liner and the bottom drain.

[@charmnGUY]

I DONT KNOW ABOUT THE LINER, I"D DO EVERYTHING THE SAME... EXCEPT USE CEMENT SEALER AND SWIMMING POOL PAINT