@@ktg7656 Oh that is just your common tool set you can get at home depot or hardware store. Here is an example : www.homedepot.com/p/Husky-100-Position-3-8-in-Drive-Universal-Socket-Wrench-Set-26-Piece-H1003D26SWS/321756955
Hi friend, how are you? Can you tell me if I get a whole front of the Rav4 model 2018 with all the radiator... Will it fit the 2015 model...change the rav model 15 to model 18
Can you tell me the name of the black plastic cover that you take off at the 7 minute 20 seconds time of the video. it covers the top fender 10 mm bolt. Thanks
Hello! I do not know the exact name of it but it is part of the windshield cowl. It's probably called the RH passenger windshield cowl corner piece. I think anyone of the terms should point you in the right direction. They are usually inexpensive so the dealership guys should know right away. Thanks for watching!
Hello! I would try to replace the fender if I could, the price is usually not much different. If you do have to cut out the holes, just use the correct drill bit for the screws you have. Also, and this may be the best option; 3M double sides stick tape. A lot of fender flares and lower bumper lips are held on by 3M double sides tape. That can be another option without drilling holes. Make sure you properly apply the 3M tape. Take care and good luck!
i have rav4 2020, i have repaired the fender, after all, one part was not fixed (Toyota 53153-0R030Guide, Radiator GRIL) can you tell me, where is this part belong? thanks
Hello! I have a 2000 4Runner and it's more or less the same. The bolts should be in the same or similar places. I'm not a big car guy but took off the fender easily. The antenna was a bit annoying but nothing difficult. Thank you for watching!
Yeah the fender liner was severely damaged in the accident. Customer then zip tied it. Only way to take it off is to cut it. If you need to take yours off it just push pins you need to take off. Go to www.ReveMoto.com
Thank you for watching our video! Visit us with the link below.
Where to purchase: bit.ly/13-15-Rav4-Fender
Very similar damage on my rav 4. I’m going to attempt to fix it myself, thanks for the video! You made it seem very doable. Liked and subscribed 👍
What’s the name of the 10 MM bolt wrench you’re using?
@@ktg7656 Oh that is just your common tool set you can get at home depot or hardware store. Here is an example : www.homedepot.com/p/Husky-100-Position-3-8-in-Drive-Universal-Socket-Wrench-Set-26-Piece-H1003D26SWS/321756955
is 2011 similar to this? somebody rammed into my rav4 while it was parked overnight as they were u turning and now i need to replace the fender
Hi friend, how are you? Can you tell me if I get a whole front of the Rav4 model 2018 with all the radiator... Will it fit the 2015 model...change the rav model 15 to model 18
It should fit as the year span is the same. Just compare the brackets.
Can you tell me the name of the black plastic cover that you take off at the 7 minute 20 seconds time of the video. it covers the top fender 10 mm bolt. Thanks
Hello! I do not know the exact name of it but it is part of the windshield cowl. It's probably called the RH passenger windshield cowl corner piece. I think anyone of the terms should point you in the right direction. They are usually inexpensive so the dealership guys should know right away. Thanks for watching!
I bought a fender without the molding holes pre-drilled. What's your suggestion on drilling new holes for the molding in my new fender?
Hello! I would try to replace the fender if I could, the price is usually not much different. If you do have to cut out the holes, just use the correct drill bit for the screws you have. Also, and this may be the best option; 3M double sides stick tape. A lot of fender flares and lower bumper lips are held on by 3M double sides tape. That can be another option without drilling holes. Make sure you properly apply the 3M tape. Take care and good luck!
i have rav4 2020, i have repaired the fender, after all, one part was not fixed (Toyota 53153-0R030Guide, Radiator GRIL) can you tell me, where is this part belong? thanks
I believe that foam piece sits on top of the rail closes to windshield where the fender will then sit on top of it.
Would the 2022 RAV4 also be similar?
Hi Ryan. Yes that year will be very similar. If you need the fender go to www.ReveMoto.com
Is the 1997 similar?
Hello! I have a 2000 4Runner and it's more or less the same. The bolts should be in the same or similar places. I'm not a big car guy but took off the fender easily. The antenna was a bit annoying but nothing difficult. Thank you for watching!
So 29 sec into this video he said twice it's gona be difficult to remove the molding screws so he he gets a box cutter😢
Yeah the fender liner was severely damaged in the accident. Customer then zip tied it. Only way to take it off is to cut it. If you need to take yours off it just push pins you need to take off. Go to www.ReveMoto.com