My new keyboard stand!
Vložit
- čas přidán 30. 09. 2018
- In this video I just need to show you guys the new keyboard stand I got from König & Meyer! A nice three-tier stand that really helps my studio feel, look and work much much better than before!
Here are links to the different parts of this keyboard stand setup that I mentioned in the video:
8810 Table-style keyboard stand »Omega«:
produkte.k-m.de/en/Keyboard-s...
(also available in red and white)
18811 Stacker - black:
produkte.k-m.de/en/Keyboard-s...
(also available in red and white)
18821 Stacker - black:
produkte.k-m.de/en/Keyboard-s...
18819 Controller keyboard tray - black
produkte.k-m.de/en/Keyboard-s...
But as I said: There are even more nice ven more accessories and add-ons:
18815-000-55 produkte.k-m.de/en/Keyboard-s...
18814-000-55 produkte.k-m.de/en/Keyboard-s...
(stacker needed to mount additional accessories)
18817-300-55 produkte.k-m.de/en/Keyboard-s...
18805-300-55 produkte.k-m.de/en/Keyboard-s...
(18817-300-55 is needed as well)
19790-316-55 produkte.k-m.de/en/Multimedia...
(18817-300-55 is needed as well)
21140-300-55 produkte.k-m.de/en/Mic-stands...
(18817-300-55 is needed as well)
18824-000-55 produkte.k-m.de/en/Keyboard-s...
Find me:
PATREON: / accurate
Email: accuratemcc@gmail.com
Website: www.accuratebeats.com
Movecutclone.com
Facebook page: / accuratebeats
Instagram: @accuratebeats
Accurate_beats
www.souncloud.com/accuratebeats
***********
My Setup:
***********
Maschine Mikro MK3
bit.ly/AccurateMikro3
Komplete Kontrol A-series
bit.ly/AccurateKontrolA
Maschine MK3
bit.ly/AccurateMaschineMK3
MPC Live
amzn.to/2HXm6xD
Arturia Keystep
amzn.to/2ubcXPL
Adam Audio X5S Powered Studio Monitor
amzn.to/2DUYPeF
Yamaha mixer:
amzn.to/2HWARjY
Teenage Engineering OP-1
amzn.to/2u9NyGa
Arturia Drum Brute
amzn.to/2pvmM5G
Arturia MicroBrute
amzn.to/2Dopvn2
Turntable: Technics 1210
amzn.to/2px4XmR
Stands for Maschine MK3 and MiniBrute 2S:
cremacaffedesign.com/kosmo/
cremacaffedesign.com/spikexl/
Macbook pro late 2013 i5 8Gb RAM
GET OUR CASSETTES:
movecutclone.bandcamp.com/merch
SPOTIFY
Accurate - Escape from the zoo // Ferm - Jaadu
open.spotify.com/album/4HOsTF...
Move Cut Clone - Sampler Science vol. 1:
open.spotify.com/album/60LMfo...
Move Cut Clone - Sampler Science vol.2:
open.spotify.com/album/6wNQhS...
Move Cut Clone - Sampler Science Vol.3:
open.spotify.com/album/37zd8D... - Hudba
Looking great, what a superb stand! Thanks for sharing :D
Now that’s a cool stand! Growing up in the 80’s with the Ultimate Support A frame stands I just didn’t get it when the X style stands came out .. reminded me of my Mom’s ironing board lol. I came here looking for a Blofeld stand .. but man I think your stand is exactally what I need for a few keyboards that have no home right now .. so thanks!
Well thought out planning and best use of space. Now there's room for more.
Thats exactly right! You never know when something new gets added ;P
*BIG "Thank YOU" for this Video, now i know what i should buy on Christmas for my MODX and DeepMind 6 ;)*
*What i like is, that you have Space for the Legs and you can adjust the High very low, so you can see whats going on and of cours the Space for 3 (!) Synths and /or much little Gear with the K&M 18819*
*This is the best Key-Stand for little Rooms like mine ;)*
*Greetings from Hamburg !*
nice setup bro. clean
Nice video! I've had that k&m stand in my mind for a while now for my asr 10 and Mpc, only as two tier. Gotta go get it one day!
Thanks for the video! I just ordered the white omega with the second and third tiers :)
Looks Nice! 👍🏾
Just to let people know that having tons of pieces of hardware is worth nothing without the capability to access everything at will. Nice vid pal, keep up the good work.
Been looking for something just like this👍
You can also put the 19685 on the 18817 (behind) or 18807 (hook) to put screw a VESA 75 / 100 monitor on the stand.
Can be helpful for having a second screen or just duplicate of your (main) screen so you can see your DAW / virtual instrument you are playing.
A great use for an old monitor. Heck, monitors are pretty cheap nowadays :)
Thx. I understand that the upper stacker comes in 2 versions. Fixed and adjustable. Mine has no wholes in the first stacker to get the highest stacker tightend. But the online store people told me i can just drill it and make it work.
This looks much better than before 👍
Just what I was looking for!
Nice machines!
Beautiful setup! The K&M stands seem to take up a lot less space than the Jaspers stands.
Dude, your like friggin Clark muthafuggin Kent.......I didn't even recognize you with out the hat and glasses.......you definitely get a thumbs-up on this one!!!!!!
Yo! That beat was dope AF!
Love the hat cut
I've just ordered the stand with second tier and shelf - i bought the K & M 14087 piano bench recently which goes with this stand and i'm really impressed with their stuff.Saw a review about it being unstable but perhaps they were using it as a saw horse with a chain saw or bow saw for cutting logs ? Nice review thanks.
.
I just bought a dual stand...and now I feel like punching myself in the throat. Oh well, you can't enough stands, I guess..but this is PERFECT for what I'm wanting, Thanks for the review.
very helpful video. thank you
I have the same stand, all tiers and added the extra arm/surface plate. Best piece of studio gear I've ever bought. They're built like an tank.
Hey Im thinking I want to buy your exact setup, anyway you could you tell me how tall it is? And how wide it is with the extra arm and surface plate? I can’t seem to find the answer online :(
@@santaclausisreal5835 No problemo. The main part of the stand, from floor to base of keyboard is set at 700mm (27.5"). This isn't the lowest setting, could go around 100mm (4") lower. Their website says it can reach up to 1,020mm (40").
Both tiers together add an extra 450mm (17-18" ish) from the face of the keyboard to the highest part of the top tier. These are set at their lowest and I have both synths sloped so they sit lower at the front.
As for the overall width of the stand with arm and plate, it is around 1300mm (51"). This is with the arm as close as it goes to the stand. It feels ok but I may have to modify it with a chopsaw to bring it in a bit closer to the keyboard.
Hope that helps.
@@Axl_Pose thank you for the reply! Just what I needed to hear to confirm this will fit in my space! Can’t wait to have this beauty holding my gear!
@@santaclausisreal5835 you're welcome. You won't be disappointed with it. Can I ask what gear you will be putting on it?
Ser riktigt nice ut! Your studio looks like a space center, bipp-bopp-bipp-bopp as my daughter would say! 👊🚀
Bipp-bopp, chicketichickwaah, boom, clap and “ah yeah” - isn’t that the meaning of life?
Hell yeah! U know it 🙌
Love your videos, your so down to earth, and always inspire me.
Nice man. We were just thinking about something like this for our gear. I'll have a look at the prices but I still think you can make it cheaper your self.
It is always a work I progress I’m going through the same right now. The hardest thing to find is a desk that works and cost.
Why don't you make one for yourself? Even with zero woodworking skills, it's not really hard to do. And a lot of building materials can be found for free in the form of disregarded furniture.
Actually that’s exactly what I did. I just hate I don’t have the skills to make metal enclosures. I created an ikea hack desk about 80’ length and 36’ width. This thing is a beast, but I wish I would have built in equipment boxes in the back instead of buying a new rack that sits on the left side of the desk. My monitor takes up a big potion of space on the rear of the desk. Finding the right balance is hard....comfort over ascetics.
Can you please make a slower video on how to set up the Omega Pro with a pair of stackers? Many thanks, Paul.
That looks amazing. I have a question about your studio. Do you use your guitar and keyboards amp speakers as the playback speakers after recording or do you have buy other speakers?
I need to get something like this. In my case I will need a v synth on top if I want to use the D Beam controller, its quite big, i'm guessing that would be fine in regards the weight being supported, thanks.
Really a nice video. I need to get a new 3 tier (or more) so this helps. It is "the" brand for mic stands. So I need to look at it. Was it easy to adjust the heights each key was at? Thanks again!
Neat Accurate! looks good stand and best, you can pick and choose components. Most I looked are flimsy, and shake especially when tri-pod like. This looks sturdy, as has wide "wheel-base". Though second lever looks like moving a bit in the vid? Do you feel it can accommodate heavier equipment like Moog Subsequent 37? I like to offload it to the rack, first level taken like in your case with Axiom-Pro (maybe NI 88 in future) (now it lives on a shelf like your with turntable, so not inviting to sit and use wider for piano like playing).
Same time, it's cool that second layer can be setup with a flat surface, so bunch of smaller controllers can go too. My main concern (more requirement to be most possible stable) goes to the second layer. Would you be comfortably playing your preferred flow with Maschine MK3 there, if have main table is busy for some reason?
Love the setup!! Absolutely beautiful work of art. How do you get your Arturia to do those colors I have that one and it never does that ?
Will that second tier shelf fit an MPC X and a 17in MacBook Pro?
I just noticed the Ruff Draft record on the back wall. Has that always been there? I love accurate but I have to say I like him better now that I’ve noticed that
Hi can the top stand move slightly inwards to reduce the width? My novation peak may not be wide enough. Thanks!
4:56 I'm going to go on record and predict that this will be a Novation SL MKIII. The NI S61 has 3 selling points: the NI integration (of course), the 2 nice displays, and the key bed itself. Aside from that, though, the case is pretty plasticky and junky. (I have one, trust me.) I moved to an SL MKIII for that reason.
what are the cube storage units you use for the vinyl records? I'm looking for sturdy ones now! Thank you
Awesome, man.
Have you ever thought rating subscribers beats on a series kind of think?
Yeah, people has told me to do that for some time now... I just dont really think it feels right for me to judge other peoples creations openly like that... Something about it just doesnt feel right. I don't want to be negative about someones art on a public platform like this you know
@@AccurateBeats totally agree with your response, that's another point why I like to watch every video on your channel. Also I really liked the effect with your snap back. Keep it that good work man
How can your maschine jam be away front your computer? I have one and always have to be looking at the monitor screen
trick with a cap super
How did you fit the Keylab on K&M 18810? The top arms seems to be 13” in depth, while keylab depth is less than that. I’m wondering if I can fit my 12” depth 49” digital piano firmly on this stand. Did you rotate the arm to cover the base of keylab?
All good but is it stable or wobbly?
That intro :D
Yeah right!? I replayed it @ quarter speed a few times to appreciate it in detail. And now the rest of the detail in this vid is also amazing.
Does K&M have a US distributor? I would love that stand for my gear.
Sweetwater I think
How do you attach the camera to the microphone stand (universal micraphone holder) on the «Omega”?
Bro are you getting a beer holder for that stand? 🤣
i like your magenta cap
Would this support a moderate modular setup on the lower tier?
Can you lean the lowest tier back and fourth? Like too close to you or too far from you?
in te second level can i put a roland tr8s (42cm) and a minilogue xd (50cm)?
Hey man...u need some HW!!!
What speaker stands are you using? Seems to require quite a narrow space on the corner of the room and could be perfect for my needs
I think they are K&M 26754
Super .Peace.)
How stable is it? Does it wobble when you play?
on the 3rd tier it looks different then the current 3rd tier they advertise on there website or di you modify it a bit ?
So my mistake the third tier you have is an earlier model they have a New model on there site
Do you think is it suitable to play keyboard while standing? How much base height could be adjusted? Thank you!
The base height is adjustable from 60 cm to 1.02 m.
What USB hub do you use?
is this video sponsored by them? the stands look amazing - but they are OBSCENELY expensive.
Now this is somthing Behringer should actually copy!
Does the upper equipment oscillate when playing the lower keyboard?
Yes!
I have one - 3 tier as well. However Im now looking for a replacement .... Why? The middle Tier depth is not enough for a new board Im after. Max depth (with 3rd Tier attached) is 365mmm - but most boards (Montage, Kronos, Fantom) are deeper than that at 400-430mm. Shame because the stand itself is solid as a Rock.
Yes! Mine is the same! I have a Yamaha Montage 8, I want it to go on the 2nd Tier! Not enough depth!! But.. K&M have developed a new part to make it deeper, but guess what? Still not deep enough!!! 🤬🤬🤬🙄🙄🙄🙄
www.k-m.de/en/products/keyboard-stands/keyboard-tables/18823-support-arm-xl-black?c=171
Die Teile von K&M schauen nach einer guten Alternative für Jaspers aus. Aber mal ganz im ernst, die Preise sind ja absurd…Selbst die großen Jaspers sind ja noch günstig wenn man sich nur eine Handvoll Erweiterungen für den K&M holt 😳
I have a 18810 and 18811, and I'd like to add a 3rd row but 18821 isn't available anywhere.
I've looked on Reverb and Sweetwater and eBay.
What do you recommend?
Hello. I'm not sure if you haven't purchased the Third Tier yet. An 18822 version is available. www.sweetwater.com/store/detail/OmegaStdV23t--k-and-m-18822-stacker-3rd-tier-for-omega-e-omega-omega-pro-stand
@@jeuvideoiihizq Thank you! I just ordered it! 🙂
I happened to have so many extra equipments bc somebody bugged the damn electronic board or actual robbed the original circuit board and replace with 60's wafers!??
I'm curious in this setup, don't see you using it in your latest videos, are you still using it?
Yeah man, its still there. Just in a weird spot at the moment
Can I use it with a yamaha p225 ?? 88 piano keys
Too much distance for me between the keyboards
Best keyboard stand out there to date is the sequenz stand by korg
For your set up looks pretty good though
The height, angle, and depth of each tier is adjustable.
Could you really put the TR-08 and TR-09 there like you showed in the video? How would you plug the bottom one in? Regardless, good video. I wish there were more videos out there comparing synth stands and home studio desks.
Was thinking the same thing. You'd have to use the middle angle of the stand for both, but the cable coming from the bottom one would still get in the way of accessing the top one. I think this is a better solution for the Boutiques: kvgear.com/t/boutique-stuff
You have Arturia!!!!!
How much it cost you in all? What you have right there.
I have to laugh. The entire time you are talking that DrumBrute Impact is calling out for attention in the background. Such a busy, colorful little fellow.
I KNOW! Its crazy! I haven't been able to turn off that "Vegas mode" and it drives me nuts :P
DILLA!
Whats the black stand at rhe second floor?
On the right? Thats Maschine Jam - an older add-on controller for Maschine that helps for some stuff but that I need got really into using on the daily. It's cool though :D
After intro: 1:24
Please make more beat making videos!
I will! But I need to mix it up from time to time with videos about surrounding things as well :D
Does anyone use this setup for live work?
Have question ?
Ah... the simple life.
Here are the links that I just found that work:
NOTE!!!! THERE IS NO WAY TO ACTUALLY BUY THESE ON THE WEBSITE FOR SOME REASON!!!
Base keyboard stand: www.k-m.de/en/products/keyboard-stands/keyboard-tables/18810-table-style-keyboard-stand-omega-black?c=171
Second row stand: www.k-m.de/en/products/keyboard-stands/keyboard-tables/18811-stacker-black
Top row: www.k-m.de/en/products/keyboard-stands/keyboard-tables/18811-stacker-black/18822-019-55
Tray: www.k-m.de/en/products/keyboard-stands/keyboard-tables/18819-controller-keyboard-tray-black
your keyboard stand links did not work for me
not a single link worked for me wtf
same here. All broken.
Google it, lmao
None of the link is working .
let me hear them beats lol...
Uh, how do you actually buy something from their dumb site tho? I can't even find a price for anything.
Hi, go to Thomann website..
Hmm...interesting....everything "in your face" setup!! I like things a bit spread out so that I can breathe!!!!
see buying all these gadgets are just to show up
How the fuck do you order anything from this website???
there's no prices and there's no order button
Hmm I see too many equipments. That means either you are hoarding, can't connect/make a real set, or satisficing inability to produce many songs?? Most of that are R & D? No way in hell for live performance!??
Just looked at it. $369 for a stand is fucking stupid
Jesus christ...make some fuckin' music.